May 2012 - App_rpt-users - lists.keekles.org

RTCM help
by Alan Adamson 31 May '12

31 May '12

Please don't tell me that I need *2* of these boxes? I want to take my repeater at a building downtown and *remote* it to my allstar box at my house. I think I only need one RTCM to do that. however, now that I have it configured and pointed at my allstar server, it keeps complaining that it can't set it's time and as a result, it won't connect? So, what configuration do I need to change to make this work? Thanks in advance, Alan

1 0

Re: [App_rpt-users] irlp channel driver Q?
by K&R Yoksh 31 May '12

31 May '12

> My OPINION.....yank the hard drive out,remove the IRLP board. > Drop in new drive, configure as a Allstar node and dont look back. I concur, although since Allstar supports the *Parallel Port* (IRLP board), the only thing required to switch over to Allstar is an -unmodified- CM108 fob. App_rpt will happily control an IRLP board for COS/PTT/AUX. 73 Kyle K0KN ----- Original Message ----- > From: Kirk Just Kirk > To: Tony Youngblood > Subject: Re: [App_rpt-users] irlp channel driver Q? ... > Pose that question to David Cameron VE7LTD......... > Be sure to read the E-mail that comes back on a old computer > That you don't mind losing to a fire....Cameron goes BEZERK.. > I do see you still have quite a few IRLP nodes listed..... > My OPINION.....yank the hard drive out,remove the IRLP board. > Drop in new drive, configure as a Allstar node and dont look back. > Unless you really NEED to be able to connect to IRLP node(s) > you are much better off to do this. There is NO REASON to stay with > IRLP.It was top dawg in it's day, but it's outdated now. > A number of us ran IRLP on our Allstar nodes, only to be threatened > by Dave Cameron that we would have our PGP keys yanked and forced > off the system. I didn't wait for the "Bitch Slap" I promptly yanked IRLP > nodes 3510 and 3520 (used to be 351 and 352 WAY BACK when) out of > service,Picked the SSI-202 chips off the boards and threw the rest in the > trash. > > If you MUST be able to cross connect...simply place the two machines back > to back > Don't publish that you are doing it, chances are you can get away with it > for a while... >

2 1

Node 28532
by (KP4TR)Ramon Gonzalez 31 May '12

31 May '12

Hello, I just configured a simplex node here at my house in eastern Tampa Bay. Node is 28532. I have yet to have a QSO with anyone, so be the first. 73!

2 1

Time
by Larry 30 May '12

30 May '12

Hello, how can I have my simplex nodes to say time? Also, to say my call sign instead of cw. Thanks, N3vsi 28094, 28366

1 0

error starting asterisk on acid
by Bradley Haney 30 May '12

30 May '12

I am sure someone has had this before, and i am sure its documented somewhere in the archives but not able to find it.. error i get is /USR/SBIN/SAFE_ASTERISK:LINE 125: 2370 sEGMENTATION FAULT (CORE DUMPED) NICE -N $PRIORITY ${ASTBINDIR}/ASTERISK -F and the error goes .,... Could some one tell me if its the computer just hosed and I need to do a re install of everything or just get a new computer or?????? Thanks BRadley

2 1

Just had to gloat
by Alan Adamson 30 May '12

30 May '12

Ok, I finally have RF hooked to AllStar. simplex base is up and functional with levels eyeballed.. at least I have something to listen too while I continue to work through my system configuration. Thanks to all for the help and encouragement so far! It's downright amazing what you can do with this flexibility.. Alan Adamson Atlanta, GA

1 0

Beagle Board & LOK interface PTT
by Bob 30 May '12

30 May '12

Hi Guys Iam new to AllStar but have set up a Beagle Board and DMK LOX interface I have put an entry in the Router for the port used I can get the WebTrancever to connect but not operate the PTT on the LOX If I go into the asterisk -r CLI and enter "beagle key" the PTT output activtes and of course "beagle unkey" drops PTT Can anyone confirm or surgest what I am doing wrong Bob VK6ZGN Perth, Western Australia

1 0

HP Compaq t5510 as allstar box
by David VK2HDM 30 May '12

30 May '12

Hi Guys Chasing around as I have 2 of these and thought that they could well do a 12v computer for a remote allstar box running as repeater. I have found that it can be reflashed to boot Linux via USB and it is a 800mhz listed on the label. http://h30499.www3.hp.com/t5/Workstations-Thin-Clients/re-flash-t5510-with-… I can't see why it can't be used for an allstar machine with a couple fi radios on it. I would like to find out has anyone done this before and any pitfalls that I should expect that will need to be worked around. David VK4VKG Fax (07) 4641 7340

2 1

irlp channel driver Q? ...
by Tony Youngblood 30 May '12

30 May '12

I have an irlp node online with no radio currently. Is it possible to add the irlp.conf channel driver and add this existing irlp node on my AllStar box? Or am I s.o.l. with an irlp node on my A* box? I think I'm understanding that requesting a new irlp node / pgp keys from the irlp people is outta the Q? but not sure if adding irlp capabilities is completely outta the Q? I'n the AllStar world. 73 ;(;) AllStar 28384 Irlp 7998 / 7766 / 7926 Echo 563329 :(:)

3 2

While on topic
by Alan Adamson 30 May '12

30 May '12

First the disclaimer, yes I understand the ramifications. But, even with that, has anyone got a usbradio.conf that has a URI directly connected to an IRLP board? I know I need PTT to COS, COS to PTT, Audio in to Audio out and the opposite and ground to ground. I don't want any CTCSS, but I'm curious of how you set the usbradio params around some of the other items. Thanks in advance, if you prefer, direct email is fine and I would appreciate it. Alan

1 0