May 2012 - App_rpt-users - lists.keekles.org

[possibly OT] AllStar registration
by Giuseppe Marullo 12 May '12

12 May '12

Hi all, just joined the list. I am in dire need to be registered on the AllStar network to experiment, but after several tries, there is no f@£"$$ way to complete the process. I got the initial email then nothing works. I tried to contact several emails offered on the contact page but no one answered. I would like to setup a couple of nodes and interoperate with EchoLink. Is there any soul that could help me with this? Thanks in advance. Giuseppe Marullo IW2JWW - JN45RQ

1 0

Noise reduction on receive audio from Allstar
by Eric Guth 10 May '12

10 May '12

Folks, I notice that when hams are noisy into their Allstar node or the repeater connected to the Allstar node, the noise on their signal seems to be higher pitch and accentuated. Some folks are always noisy and therefore difficult to copy. Does anyone else have this problem, and has anyone reduced the noise with either software running on the server or some hardware inserted in between the audio from the URI or CM108 dongle to the transmitter? I was thinking a DSP audio filter (more expensive than my whole node). 73, Eric 4Z5UG

5 14

Re: [App_rpt-users] SIP Smart Phone client ...
by Jeffrey S. Carrier 09 May '12

09 May '12

I have the acid distro and it works like its supposed to. Jeffrey S. Carrier Fire Inspector, Plant Protection (719) 561-7199 direct (719) 561-6567 fax 1612 E. Abriendo Ave. Pueblo, Colorado 81004 jeffrey.carrier(a)evrazincna.com Senate from my Android phone. -----Original Message----- From: Tony Youngblood [k5try73(a)gmail.com] Received: Wednesday, 09 May 2012, 11:13 To: app_rpt-users(a)ohnosec.org [app_rpt-users(a)ohnosec.org] Subject: Re: [App_rpt-users] SIP Smart Phone client ... Is this the same config for the ACID distro? And thanks! I need to add this too. 73 k5TRY ;(;) AllStar 28384 Irlp 7998 / 7766 / 7926 Echo 563329 :(:) On May 9, 2012, at 11:00 AM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: SIP smart phone client (Jeffrey S. Carrier) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 9 May 2012 09:21:21 -0600 > From: "Jeffrey S. Carrier" <jeff.carrier(a)rmsmsecurity.com> > To: <wb3awj(a)comcast.net>, <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] SIP smart phone client > Message-ID: > <9E97761DFD3ED7488C4F6D0C2BC286C616C84C(a)Security-5.plantprotection.ad> > Content-Type: text/plain; charset="us-ascii" > > This is what I was looking for! Thank you! I thought I saw one for a > sip client somewhere but I'm sure if I did they work about the same > anyway. Its working just fine now. Thanks again. > > > > 73 de K0JSC > > > >

1 0

Re: [App_rpt-users] SIP Smart Phone client ...
by Tony Youngblood 09 May '12

09 May '12

Is this the same config for the ACID distro? And thanks! I need to add this too. 73 k5TRY ;(;) AllStar 28384 Irlp 7998 / 7766 / 7926 Echo 563329 :(:) On May 9, 2012, at 11:00 AM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: SIP smart phone client (Jeffrey S. Carrier) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 9 May 2012 09:21:21 -0600 > From: "Jeffrey S. Carrier" <jeff.carrier(a)rmsmsecurity.com> > To: <wb3awj(a)comcast.net>, <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] SIP smart phone client > Message-ID: > <9E97761DFD3ED7488C4F6D0C2BC286C616C84C(a)Security-5.plantprotection.ad> > Content-Type: text/plain; charset="us-ascii" > > This is what I was looking for! Thank you! I thought I saw one for a > sip client somewhere but I'm sure if I did they work about the same > anyway. Its working just fine now. Thanks again. > > > > 73 de K0JSC > > > >

1 0

Re: [App_rpt-users] SIP smart phone client
by K&R Yoksh 09 May '12

09 May '12

I use CSipSimple (free). It has every feature I need and works quite well. I was quite surprised to find that incoming SIP calls will wake up the phone, unlike my old Iphone. Good going, Android! 73 Kyle K0KN --- Original Message --- I know I've seen this before but I can't locate it after searching for nearly an hour. The question; which android sip client is "best" with app_rpt and can anyone advise on the setup required on the allstar server? Again, I apologize but I can't seem to locate the original post anywhere. 73 de K0JSC

1 0

Asterisk 1.8
by Rob Henry 08 May '12

08 May '12

Hello, has anyone been able to get app_rpt to work with asterisk branch 1.8. If so did you have any hurdles and if not do you know why. Thanks so much. Rob

1 0

BeagleBoard XM availability
by George Csahanin 07 May '12

07 May '12

Since the world seemed out of them-Digi-Key got some in, has 24 left as of five minutes ago, Monday 6PM CDT Mouser has about 1800 on backorder, due in May 18th GeorgeC W2DB

1 0

lox, beagle, and pickles...
by George Csahanin 07 May '12

07 May '12

Hey everyone, I wanted to start fiddling with a beagle board, get a lox board, and can easily find those, but the pickle linux seems to not be available. Anyone know of a working source for those? GeorgeC George J Csahanin W2DB Cedar Park, TX 512-401-2630 401-338-0568 cel

5 7

Re: [App_rpt-users] lox, beagle, and pickles...
by George Csahanin 04 May '12

04 May '12

Also had a note to use piconode.org Neither web site works, I had already tried them, DNS lookups on both fail. However, the one on the main page of allstarlink.org does work, thanks. I normally blow right past that page when logging in. So I never really noticed that link Thanks for the replies, guys. GeorgeC W2DB ----- Original Message ----- From: "David Kierzkowski" <dave_k_420(a)yahoo.com> To: "George Csahanin" <george(a)dyb.com> Sent: Friday, May 04, 2012 4:36 AM Subject: Re: [App_rpt-users] lox, beagle, and pickles... > http://dl.picklejar.org/pickle-current.tgz > > On 5/4/2012 1:55 AM, George Csahanin wrote: >> Hey everyone, I wanted to start fiddling with a beagle board, get a lox >> board, and can easily find those, but the pickle linux seems to not be >> available. Anyone know of a working source for those? >> >> GeorgeC >> >> >> George J Csahanin >> W2DB >> Cedar Park, TX >> 512-401-2630 >> 401-338-0568 cel >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

3 3

no PTT when simplusb selected.
by David Kierzkowski 03 May '12

03 May '12

I have a ACID install with URIx connected to a icom v8000. Want to setup as a simple repeater. Through the portal when setting the interface to simpleusb, no PTT will work, but i can hear recieved audio. if i setup the interface as usbradio (i dont want / radio is doing ctcss/ speak level audio ) then the radio will PTT and pass overmodulated audio (as expected) but no RX audio will pass. i have a feeling theres a config issue with simpleusb.conf.. do u guys see anything? I dont know why it creates the [usb] device stanza. Also while in the simple_tune_usb.sh i can see and set the RX levels properly and manually flash the PTT. [general] [usb] hdwtype=0 rxboost=1 txboost=1 carrierfrom=dsp ctcssfrom=dsp txmixa=composite txmixb=0 invertptt=0 duplex=1 rxondelay=0 eeprom=0 [usb28522] hdwtype=0 rxboost=0 txboost=1 carrierfrom=usb ctcssfrom=usb txmixa=voice txmixb=no invertptt=0 duplex=0 rxondelay=1 eeprom=0 and here is simpleusb_tune_usb28522.conf [usb28522] ; name=usb28522 ; devicenum=2 devstr=4-4 rxmixerset=400 txmixaset=500 txmixbset=500

3 4