November 2013 - App_rpt-users - lists.keekles.org

connections fail
by Benjamin L. Naber 28 Nov '13

28 Nov '13

lately I've been having an issue connecting to nodes, especially the bigger ones. I haven't been able to connect to node 2135 at all, and sometimes it takes two or three tries to connect to node 2560. Do these nodes have limits on incoming/outgoing connections? No changes have been made to my node or my network in about a year. ~Benjamin, KB9LFZ allstar node 28569

5 7

Re : Re: dmk uri question
by Ken 27 Nov '13

27 Nov '13

>> pete M <petem001(a)hotmail.com> >> Ok . Anyone can tell me how to find if the uri you have do have an eeprom inside aside from opening it.. More recent versions of the URI have an "E" appended to the end of the serial number (white paper sticker) Alternatively, with the CLI up and the URI running, you can unplug the USB cable and re-plug it With no EEPROM, you will get a message like this (below) saying you have no EEPROM == Set device 5-1 to usb1625 [Nov 27 17:30:59] WARNING[2838]: chan_usbradio.c:1728 hidthread: Loaded parameters from usbradio_tune_usb1625.conf for device usb1625 . [Nov 27 17:30:59] WARNING[2836]: chan_usbradio.c:2702 usbradio_read: Possibly stuck USB read channel. [usb1625] [Nov 27 17:30:59] WARNING[2836]: chan_usbradio.c:2705 usbradio_read: Nope, USB read channel [usb1625] wasn't stuck after all. [Nov 27 17:30:59] NOTICE[2838]: chan_usbradio.c:1791 hidthread: USB Adapter has no EEPROM installed or Checksum BAD on channel usb1625 Regards Ken

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 57, Issue 82
by kk6ecm 27 Nov '13

27 Nov '13

Sent from iPad On Nov 27, 2013, at 2:06 PM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re?: Re: dmk uri question (pete M) > 2. connections fail (Benjamin L. Naber) > 3. Re: Re?: Re: dmk uri question (Marshall Oldham) > 4. Re: connections fail (Paul J. Agamata) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 27 Nov 2013 13:58:48 -0500 > From: pete M <petem001(a)hotmail.com> > Cc: <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] Re?: Re: dmk uri question > Message-ID: <BAY407-EAS7839FC649927EB0A1392FA97EF0(a)phx.gbl> > Content-Type: text/plain; charset="utf-8" > > Ok . Anyone can tell me how to find if the uri you have do have an eeprom inside aside from opening it.. > > --- Message initial --- > > De : "Shane Morris" <edgecomberts(a)gmail.com> > Envoy? : 27 novembre 2013 12:14 > A : "Doug Crompton" <doug(a)crompton.com> > Cc: "Greg" <kb1ncj(a)gmail.com>, app_rpt-users(a)ohnosec.org > Objet : Re: [App_rpt-users] dmk uri question > > Can't you store an ID string in the EEPROM for identifying multiple URIs on > a system, so the computer knows which interface to activate when, which is > useful for crossband repeaters and the like. > > That was my impression of why it was there - I could be way off the mark > though, and bow to superior knowledge in these matters. > > > On Thu, Nov 28, 2013 at 3:49 AM, Doug Crompton <doug(a)crompton.com> wrote: > >> The eeprom stores the level settings and is never necessary but might be >> desirable if you are using the interface with multiple radios. You would >> mount the eeprom in the connector of each radio cable and store the >> settings for that radio. Then when you switched cables the settings would >> follow along with it. If you are just using one radio you would not need >> the eeprom and even if you were using more than one radio being without it >> it would just mean you would have to run through the settings again when >> you changed radios. Without the eeprom level settings are stored in a >> configuration file on the computer when you run the level setting utility. >> For SimpleUSB the file is called 'simpleusb_tune_usb.conf'. and it looks >> like this - >> >> [usb] >> ; name=usb >> ; devicenum=1 >> devstr=1-1 >> rxmixerset=500 >> txmixaset=500 >> txmixbset=500 >> >> The file is created by 'simpleusb-tune-menu' but you can edit it manually >> if you like. >> >> Look at the DMK website under support files and there is a description of >> this. The eeprom is a common type so if you decide later you want to use it >> you can buy it from Mouser or elsewhere. >> >> >> >> *73 DougWA3DSPhttp://www.crompton.com/hamradio >> <http://www.crompton.com/hamradio>* >> >> >>> Date: Wed, 27 Nov 2013 10:51:12 -0500 >>> From: kb1ncj(a)gmail.com >>> To: app_rpt-users(a)ohnosec.org >>> Subject: [App_rpt-users] dmk uri question >> >>> >>> Looking to buy another uri. What is the advantage of the uri with >>> eeprom? Also if anyone has an extra they are willing to part with, let >>> me know.. >>> Thanks >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 1

Re : Re: dmk uri question
by pete M 27 Nov '13

27 Nov '13

Ok . Anyone can tell me how to find if the uri you have do have an eeprom inside aside from opening it.. --- Message initial --- De : "Shane Morris" <edgecomberts(a)gmail.com> Envoyé : 27 novembre 2013 12:14 A : "Doug Crompton" <doug(a)crompton.com> Cc: "Greg" <kb1ncj(a)gmail.com>, app_rpt-users(a)ohnosec.org Objet : Re: [App_rpt-users] dmk uri question Can't you store an ID string in the EEPROM for identifying multiple URIs on a system, so the computer knows which interface to activate when, which is useful for crossband repeaters and the like. That was my impression of why it was there - I could be way off the mark though, and bow to superior knowledge in these matters. On Thu, Nov 28, 2013 at 3:49 AM, Doug Crompton <doug(a)crompton.com> wrote: > The eeprom stores the level settings and is never necessary but might be > desirable if you are using the interface with multiple radios. You would > mount the eeprom in the connector of each radio cable and store the > settings for that radio. Then when you switched cables the settings would > follow along with it. If you are just using one radio you would not need > the eeprom and even if you were using more than one radio being without it > it would just mean you would have to run through the settings again when > you changed radios. Without the eeprom level settings are stored in a > configuration file on the computer when you run the level setting utility. > For SimpleUSB the file is called 'simpleusb_tune_usb.conf'. and it looks > like this - > > [usb] > ; name=usb > ; devicenum=1 > devstr=1-1 > rxmixerset=500 > txmixaset=500 > txmixbset=500 > > The file is created by 'simpleusb-tune-menu' but you can edit it manually > if you like. > > Look at the DMK website under support files and there is a description of > this. The eeprom is a common type so if you decide later you want to use it > you can buy it from Mouser or elsewhere. > > > > *73 DougWA3DSPhttp://www.crompton.com/hamradio > <http://www.crompton.com/hamradio>* > > > > Date: Wed, 27 Nov 2013 10:51:12 -0500 > > From: kb1ncj(a)gmail.com > > To: app_rpt-users(a)ohnosec.org > > Subject: [App_rpt-users] dmk uri question > > > > > Looking to buy another uri. What is the advantage of the uri with > > eeprom? Also if anyone has an extra they are willing to part with, let > > me know.. > > Thanks > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

dmk uri question
by Greg 27 Nov '13

27 Nov '13

Looking to buy another uri. What is the advantage of the uri with eeprom? Also if anyone has an extra they are willing to part with, let me know.. Thanks

4 3

Dynamic DHS Service
by Lu Vencl 25 Nov '13

25 Nov '13

Anyone using Dynamic DHS Service to automatically update your dynamic IP address? If so, what client or script are you using please? Thanks Lu, KA4EPS

6 5

XIPAR
by Greg 25 Nov '13

25 Nov '13

Is it possible to use echolink with the xippar install? I see echolink.conf in /etc/asterisk but doesn't seem to activate. Thanks

3 2

Re: [App_rpt-users] Font colors in Pickle
by Bob 25 Nov '13

25 Nov '13

Thanks... I've noticed the layout is different in Pickle than in ACID. It is where you said it should be in ACID. In Pickle its /usr/bin/dircolors The file is not very readable using CAT, so it's not clear how to modify it. Studying the Linux explanation in hopes of understanding this version. Pickle dircolors was written by GNU, so may have to go through their users group. Thanks much, Bob -----Original Message----- Date: Sun, 24 Nov 2013 13:12:43 -0800 From: "Bob" <kk6ecm(a)gmail.com> To: <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Font colors in Pickle Message-ID: <B9F7D647454C4CDABEEA455EFAD9E87D@ThePykesHP> Content-Type: text/plain; charset="us-ascii" What do the font colors in Pickle say about the file names (e.g. blue, red, white, cyan, green)? Thanks, Bob KK6ECM

1 0

Cepstral questions
by Doug Crompton 25 Nov '13

25 Nov '13

I have a new allstar server that I would like to add Cepstral to. I have used Cepstral Diane voice that I purchased years ago on another PBX system. At the time I remember it being a very reasonable buy. What are others experiences regarding Cepstral purchases. One third party page I went to said they offer an unlimted demo but the link was broken. When you go to there store it is $40 for voices, $100/ concurrency port, and $200 to write to file. I do not remember all that before or prices that high for personal use. If I want to write a wav file for a weather script do I need the write to file option? What are others buying or not buying here??? I want 8Khz Diane voice. 73 Doug WA3DSP http://www.crompton.com/hamradio

2 1

Help
by Larry 25 Nov '13

25 Nov '13

Hello everyone and Happy Thanksgiving. A friend gave me a HP DC5700 pentium D 2.8 ghz 160gb sata hd slim line. Anyway I loaded Acid, everything went find on the install until the the last reboot. It goes to the login in prompt, I can log and ssh in from my windows computer. But my seperate monitor that is connected to the hp shows this. asterisk died with code 1 automatically restarting asterisk mpg123:no process killed repeats over & over Went to google. It says edit etc/asterisk/modules.conf and place noload =>cdr_mysql.so at the bottom of the file. No luck. Anyone have a fix?? Larry, n3vsi ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3426 / Virus Database: 3629/6859 - Release Date: 11/22/13

6 5