January 2014 - App_rpt-users - lists.keekles.org

RTCM DC Coupling?
by KJ6KO 03 Jan '14

03 Jan '14

Is the TX OUT audio on a RTCM AC coupled or do I need to install a coupling cap on it to connect to an audio input that has DC on it (MOTO)? Thanks....Greg __________ Information from ESET NOD32 Antivirus, version of virus signature database 9244 (20140102) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

2 1

Automating node connections
by Matthew Pitts 03 Jan '14

03 Jan '14

Good evening folks, I know it's probably possible, but does anyone have a specific method of connecting to specific nodes on a time schedule? I am wanting to start connecting my Echolink configured node to a specific Echolink node at a specific time, then disconnect it after a set time. Any suggestions? Matthew Pitts N8OHU AllStar Link nodes 28713, 28910, 28912, 28913

2 1

Parallell Port PTT Issue
by James Hill 02 Jan '14

02 Jan '14

Hi Guys, My modified CM108 suffered a catastrophic failure yesterday (one of the 3.5mm jacks broke off the board), and for the time being I've had to resort to parallell port PTT switching. It works fine - But I have an issue where when I start the node up, the PTT is being held open until such a time as the node sends a CW ID, and then it will drop after the ID. This is far from ideal, as the TX can be held open for up to 15 minutes at a time! Is there a known fix for this? or can I setup a cron/scheduler event to send a one off CWID, say 10 seconds after initialisation to make the PTT drop? If the answer is yes, then how do I do it? Thanks, James - 29681

3 3

allmon all full
by Ken 01 Jan '14

01 Jan '14

My box running the Allstar monitor crashed - because it ran out of disk space. I found that this was due to the error log (/var/log/httpd/error_log) filling up with a zillion messages like this one: [Fri Dec 06 21:36:28 2013] [error] [client 108.18.144.226] PHP Deprecated: Function split() is deprecated in /var/www/html/server.php on line 29, referer: http://108.18.144.226/link.php?node=28204 Line 29 of server.php has the problematical split function $arr = split("\|", trim($line)); I replaced it with $arr = preg_split("/\|/", trim($line)); There is also the same error for line 11 of link.php. After making these changes, I deleted the error log - and it has not come back. My system is running: PHP 5.3.27 httpd-2.2.3-45.el5.centos.1 73 Ken

2 3

Node Numbers 40000-40500
by mike＠midnighteng.com 01 Jan '14

01 Jan '14

2 1