January 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] WARNING: Filing an abuse complaint to unsubscribe will result in you being permanently banned from this mailing list
by mike＠midnighteng.com 20 Jan '14

20 Jan '14

2 1

Re: [App_rpt-users] WARNING: Filing an abuse complaint to unsubscribe will result in you being permanently banned from this mailing list
by Bryan Fields 20 Jan '14

20 Jan '14

On 1/19/14 3:40 PM, Kevin Walsh wrote: > The list serve software inserts a footer into each message thread. Can you > edit that footer to include a link "Click here to unsubscribe from the > App_rpt-users mailing list. It will stop these messages from being sent to > you". couple points as I've hosted listserv's before. 1. This is redundant, it's already in the headers List-Unsubscribe: <http://ohnosec.org/cgi-bin/mailman/options/app_rpt-users>, <mailto:app_rpt-users-request@ohnosec.org?subject=unsubscribe> 2. This will not make a difference to these people, they will still send abuse complaints. People are buttholes; as rule hams have a higher percentage of buttholes than the general population. How about you publicly shame them and b7 them from allstar? 73's -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

Just a test message... no need to read or reply
by mike＠midnighteng.com 19 Jan '14

19 Jan '14

1 0

lsnodes 1.01
by Doug Crompton 19 Jan '14

19 Jan '14

I updated my lsnodes Perl scripts to include Echolink node identification. It lists the call letters of connected Echolink nodes. This feature requires that Echolink is installed in the server at least to the point of downloading the Echolink database. A further description and download are at the web page. http://crompton.com/hamradio/allstar/lsnodes.html 73 Doug WA3DSP http://www.crompton.com/hamradio

1 0

RTCM and no courtesy tones
by 41.2 Jim 19 Jan '14

19 Jan '14

Just did a swap, from an URIx to an RTCM and have it configured and working for one thing... now I have no courtesy tones local I can hear the ct for link traffic but no tone of any kind for local traffic just the ID'er sounds off and time works, and can force an ID...but no local courtesy tones ...and the telemdefault=2 (did before the RTCM) is not working either, when connected to a hub I hear all connect to and disconnect traffic all the time , no 'on for a time then off' any ideas? Be easy, this is my first RTCM Thank you all in advance, for your time Jim Frederick KF6QBW 446.600- 100.0 PL Repeater AllStar Node # 28839 Skype = jim41.2

1 0

Re: [App_rpt-users] Echolink database
by Doug Crompton 18 Jan '14

18 Jan '14

Tim (and all), OK on rpt.conf. CCing this to the forum. I think my confusion was between the xipar and acid Allstar versions. Apparently the xipar version uses the echolink/sl0 stanza setting. Also I will be adding echolink call lookup to lsnodes for those that have echolink enabled. Can anyone can explain the third parameter (shown as 1 below) for 'echolink dbget' ? It seems that it does not matter what it is but it has to be there. WA3DSP_Allstar*CLI> echolink dbget 1 147090 147090|WA3DSP-L|50.191.8.33 WA3DSP_Allstar*CLI> echolink dbget Usage: echolink dbget <nodename|callsign|ipaddr> <lookup-data> Looks up echolink db entry 73 Doug WA3DSP http://www.crompton.com/hamradio From: tim.sawyer(a)mac.com Subject: Re: Echolink database Date: Sat, 18 Jan 2014 07:55:52 -0800 To: doug(a)crompton.com Sorry I didn't read your note thoroughly. Yes, zap/pseudo is the way to do it with no radio. Just add another node to your system and point echolink at it. --Tim:wq On Jan 17, 2014, at 10:55 PM, Doug Crompton <doug(a)crompton.com> wrote: Tim, What is the proper way to install echolink in rpt.conf ? I tried - rxchannel=echolink/el0 and on restart it failed - would not enter cli. This is the way it is shown in the examples. When I use - rxchannel=Zap/pseudo It works. In both cases the echolink.conf points to this stanza. I want to have a node just for echolink. No radio. I will connect to radio node as desired. Echolink seems to work with the pseudo channel, someone connected to me and we communicated. 73 Doug WA3DSP http://www.crompton.com/hamradio

2 2

Re: [App_rpt-users] Telemetry Help
by mike＠midnighteng.com 18 Jan '14

18 Jan '14

1 0

Re: [App_rpt-users] Telemetry Help
by mike＠midnighteng.com 18 Jan '14

18 Jan '14

3 2

Re: [App_rpt-users] Telemetry Help
by mike＠midnighteng.com 18 Jan '14

18 Jan '14

3 2

Install Script Failing
by Kevin Walsh 18 Jan '14

18 Jan '14

Hi, I am trying to rebuild a node and I'm getting an error. It happens in the second install script. I have attached a screen shot of where it's failing. It appears that a file has been deleted from downloads.asterisk.org. Thanks, Kevin W8KHW[image: Inline image 1]

3 3