January 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] lsnodes
by Douglas Waugh 29 Jan '14

29 Jan '14

You could connect to my node 27553, I am usually connected to *TACOMA* From: Doug Crompton Sent: Wednesday, January 29, 2014 9:23 AM To: Douglas Waugh Subject: RE: [App_rpt-users] lsnodes Doug, Did you get my previous email? 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: doug(a)crompton.com To: waughdj(a)msn.com Subject: RE: [App_rpt-users] lsnodes Date: Tue, 28 Jan 2014 12:19:21 -0500 Doug, You are right. My check was for node numbers > 100000 but I failed to look for leading 0's. Looking at the list I would say that 95%+ of the nodes are truly 100,000 or above. I think I have nade a change that will correct that but I want to test it. Do you have an Allstar node I can connect to where echolink nodes that fit the leading 0 and less than 100000 number are connected 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: waughdj(a)msn.com To: app_rpt-users(a)ohnosec.org Date: Tue, 28 Jan 2014 01:48:33 -0600 Subject: [App_rpt-users] lsnodes Doug, I noticed one thing that happens when Echolink nodes are listed. If you have zero’s in front of the node numbers they don’t register the calls. It says No info. Is there any way that the zero’s can be omitted from the text for them to show the right callsigns.. Examples are 007059 and 057275. Thanks ahead of time. KC0EQA, Doug _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] lsnodes
by Douglas Waugh 29 Jan '14

29 Jan '14

From: Doug Crompton Sent: Wednesday, January 29, 2014 9:23 AM To: Douglas Waugh Subject: RE: [App_rpt-users] lsnodes Doug, Did you get my previous email? 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: doug(a)crompton.com To: waughdj(a)msn.com Subject: RE: [App_rpt-users] lsnodes Date: Tue, 28 Jan 2014 12:19:21 -0500 Doug, You are right. My check was for node numbers > 100000 but I failed to look for leading 0's. Looking at the list I would say that 95%+ of the nodes are truly 100,000 or above. I think I have nade a change that will correct that but I want to test it. Do you have an Allstar node I can connect to where echolink nodes that fit the leading 0 and less than 100000 number are connected 73 Doug WA3DSP http://www.crompton.com/hamradio -------------------------------------------------------------------------------- From: waughdj(a)msn.com To: app_rpt-users(a)ohnosec.org Date: Tue, 28 Jan 2014 01:48:33 -0600 Subject: [App_rpt-users] lsnodes Doug, I noticed one thing that happens when Echolink nodes are listed. If you have zero’s in front of the node numbers they don’t register the calls. It says No info. Is there any way that the zero’s can be omitted from the text for them to show the right callsigns.. Examples are 007059 and 057275. Thanks ahead of time. KC0EQA, Doug _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Node not in database
by Ken Robinson 29 Jan '14

29 Jan '14

Hi, After a pc failure I have had to reinstall Acid, it works ok, my node loads and works perfectly locally but it will not access the AllStar network. All I get is node 28468 is no longer in the database. Can anyone tell me where I have gone wrong? If I log on to the Allstar site and attempt a download configuration I get "sorry your server does not have any downloadable nodes (register only)" Hopefully someone can point me in the right direction Regards Ken G0LCE

2 1

did anyone notice
by Ken 29 Jan '14

29 Jan '14

Perhaps the first step is getting your local coordination body to list the asterisk number. After some gentle encouragement, we got that to happen in the DC area http://www.tmarc.org/freqs/Frequency.html Regards Ken

5 4

Did anyone notice?
by Bryan D. Boyle 29 Jan '14

29 Jan '14

http://www.arrl.org/repeaters You have to be coordinated, and can only change information they have (ie, if it isn't coordinated or is a hotspot or....no dice). BUT, if enough of us make noise about listing our AllStar node numbers, maybe the dolts in the League publishing division will finally resolve their cranial-rectal inversion and start listing allstar node numbers where applicable? Civil obedience, quietly....??? -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

4 4

RTCM Question
by 41.2 Jim 29 Jan '14

29 Jan '14

Question.... is their anything that is universal to both Stanzas, "usbradio.conf & voter.conf" that can be used with an RTCM like say .... rxsquelchdelay=xx or rxondelay=xx as I am tring to rid my repeater of a low signal squelch tail while using a PL board(TS-64 in decode only) and with the RTCM providing squelch, A kerchunk will get a long squelch tail ???... was not an issue with the URIx and DSP have the squelch at 7 turns past minimum gating and still get a long crash ?? Thank you all, in advance, for your time Jim Frederick KF6QBW 446.600- 100.0 PL Repeater AllStar Node # 28839 Skype = jim41.2

3 4

lsnodes
by Douglas Waugh 28 Jan '14

28 Jan '14

Doug, I noticed one thing that happens when Echolink nodes are listed. If you have zero’s in front of the node numbers they don’t register the calls. It says No info. Is there any way that the zero’s can be omitted from the text for them to show the right callsigns.. Examples are 007059 and 057275. Thanks ahead of time. KC0EQA, Doug

1 0

java and webtransceiver
by K1IF 25 Jan '14

25 Jan '14

To make the webtransceiver work again, I created an exception in the security tab of the java control panel. I use windows start and in the search box typed java control and it came up. Just click on security and add exception for allstarlink.org webtransceiver works again! --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com

1 0

adding a node
by Geoff 25 Jan '14

25 Jan '14

My node 29655 has been working, and things are great, having fun with courtesy tones, wait-times, etc... Had 29656 configured to be the echolink node... echolink connects are great - even have the system spitting out callsigns of echolink connections (that are allowed), and things have been great! ... until .... Today, I built a cable for a 2nd URIx to Kenwood TMV-7a, using the packet port. That's not the issue. Issue is when I plugged in the 2nd URIx. radio-tune-menu thinks it's 29656! How do I tell asterisk that it's supposed to be 29657?

3 2

Re: [App_rpt-users] webtransceiver issue java
by N7LD＠aol.com 24 Jan '14

24 Jan '14

Open Configure Java Under ADVANCED Under Perform Certificates revocation on Check "Do Not Check" See if that helps. Lee In a message dated 1/24/2014 12:24:08 A.M. Pacific Standard Time, ea8ee1(a)gmail.com writes: Hi Mike I deleted the java applets 7 v51 completely even the windows registry java appears where I Reinstaller and is giving me security error've tried mozilla, ie, chrome, opera and safari and I do not get it to work however on a laptop nevertheless works perfectly with w7 El 24/01/2014 0:20, _mike(a)midnighteng.com_ (mailto:mike@midnighteng.com) escribió: You probably should state Browser & OS from the start. Hard for anyone to help when we don't know what your using. I'll assume ie8... If you look in the URL bar on the left side (if you have not re-arranged things) you should see a plug-in icon (looks like a lego block). Click the plug-in icon and you should be able to get a menu to enable for the site. OR Check the help pages for your browser (online support). If you don't yield anything, you might try finding all instances of _allstarlink.org_ (http://allstarlink.org/) in your windows registry and delete them (last resort). ...mike/kb8jnm -------- Original Message -------- Subject: Re: [App_rpt-users] webtransceiver issue java From: ea8ee <_ea8ee1(a)gmail.com_ (mailto:ea8ee1@gmail.com) > Date: Thu, January 23, 2014 6:10 pm To: mike <_mike(a)midnighteng.com_ (mailto:mike@midnighteng.com) > Cc: app_rpt mailing list <_app_rpt-users(a)ohnosec.org_ (mailto:app_rpt-users@ohnosec.org) > the windows says SecurityException missing required permissions manifest attribute in main jar https:_allstarlink.org/portal/webtransceiver.jar_ (http://allstarlink.org/portal/webtransceiver.jar) 2014/1/23 ea8ee <_ea8ee1(a)gmail.com_ (mailto:ea8ee1@gmail.com) > Hi Mike I have given all permissions and it worked perfectly but by mistake the last time I gave refuse permission and now can not get the java is enabled and I get an error screen 2014/1/23 <_mike(a)midnighteng.com_ (mailto:mike@midnighteng.com) > This is a browser issue: Because of various security problems, you need to enable java and may need to specifically enable it per website. Check your browsers help page. ...mike/kb8jm -------- Original Message -------- Subject: [App_rpt-users] webtransceiver issue java From: ea8ee <_ea8ee1(a)gmail.com_ (mailto:ea8ee1@gmail.com) > Date: Thu, January 23, 2014 5:45 pm To: app_rpt mailing list <_app_rpt-users(a)ohnosec.org_ (mailto:app_rpt-users@ohnosec.org) > Α Hello everyone! I tried to access through the webtransceiver me perfectly but I run the java access confusion gave him deny access and now I can not access the java let me change the option webtransceiver someone can tell me how to change the permissions to access using java applets ____________________________________ _______________________________________________ App_rpt-users mailing list _App_rpt-users(a)ohnosec.org_ (mailto:App_rpt-users@ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list _App_rpt-users(a)ohnosec.org_ (mailto:App_rpt-users@ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list _App_rpt-users(a)ohnosec.org_ (mailto:App_rpt-users@ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0