January 2014 - App_rpt-users - lists.keekles.org

RPM's & Virtuozzo
by Bob - AF6D 11 Jan '14

11 Jan '14

Are RPMs available, or could they be created for those of that run Virtuozzo for Linux by Parallels, as well as other virtualization software? I generally run one-two virtual servers on an Intel quad core XEON for unparalleled performance and have the security of daily backups and the ability to "bounce" a "container" from a failing "hardware node" to another "hardware node." I use CentOS on all of my over 100 machines. All of my motherboards have at least one serial port as do most server boards in production. OpenVZ is the free version of Virtuozzo and serves as the test bed for it. The ability to backup and restore anywhere, as well as to bounce or migrate anywhere have saved my butt many times.

2 1

Re: [App_rpt-users] Incoming connects
by Bryan Fields 11 Jan '14

11 Jan '14

Doug, If you don't mind shutting down asterisk you can test with netcat. have netcat listen on 4569 udp and then connect to it from the external box with netcat in client mode. type some stuff on standard in and see if it shows up on the server on standard out. Server bryan@keekles:~$ netcat -lu 4569 testing to the server Client bryan@keekles:~$ netcat -u 192.168.1.2 4569 testing to the server This will isolate it down to the network. On 1/10/14 10:41 PM, Doug Crompton wrote: > I am remotely trying to troubleshoot a friends new Allstar installation. I > can ssh in and connect out to nodes but I cannot connect in to the system > from external nodes. Port 4569 is forwarded. > > I discovered this link - > > http://www.voip-info.org/wiki/view/IAX > > about consistent NAT and I was wondering if that might be the problem. > > I was able to connect in one time right after a reboot which might support > the NAT issue. > > The router is an Actiontek MI424WR GigE as supplied by Verizon on their > FIOS system. > > Is anyone else having a problem with this router or have any ideas on this? > > Nothing is logged at the server or shows up in the client on the system > which kind of points to a routing failure. > > Is there a good way to check for open port 4569 as I don't think normal port > scan programs will check this. > > *73 Doug > WA3DSP > http://www.crompton.com/hamradio* > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

tone pass thru
by Harry Romano 08 Jan '14

08 Jan '14

Hi All, I found an audio problem with my allstar but do not know how to fix it. The sub audible tone is coming out of the receiver and going thru the fob to allstar and thru the net from the VHF receiver . I was able to install iaxrpt and that's what I found. Could someone please tell me if there is some allstar setting that blocks the sub-audible tone from entering the net. 73 Harry Director ARASWF KC4RPP Skype: hromano777 Phone 1-239-455-1411 www.ed2.biz <http://www.ed2.biz/> http://www.youtube.com/inventionsareus http://www.youtube.com/magnetman777 God Bless America

2 1

Allstar newsline reflector?
by Steve 08 Jan '14

08 Jan '14

Does such a thing exist? Like the IRLP experimental reflector 0016

2 1

Web Tranceiver on a new MAC?
by KJ6KO 08 Jan '14

08 Jan '14

Anyone having issues using the web tranceiver on a new mac? Doesn't seem to like it. Java issues? Thanks...Greg __________ Information from ESET NOD32 Antivirus, version of virus signature database 9261 (20140107) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

3 2

Dual PL Tone? Possible?
by Bob Roszkowski 07 Jan '14

07 Jan '14

Could it be possible to have 2 pl tones on a repeater? Here is what I was thinking, if somone wanted to talk on the link, they could use PL tone A. Then, If someone wanted to use the repeater locally and not transmit over the link, they can use PL tone B. I understand you can put the system in monitor mode, but this would be a nice option with out having to reconfigure the repeater. I could see this useful if Skywarn was activated and they don't want to tie up the link but still be able to talk to them if needed. Just my random thought of the day. boB - W5EVH

10 17

allmon question
by Greg 07 Jan '14

07 Jan '14

Thanks to the help of one sending me a comprehensive set of instructions I do have a remote web server with Allmon functional. Now I am wondering if there is any capability to see recent (not active) connections with Allmon. I suppose this is like CDR in a similar asterisk based PBX. Thanks, Greg

2 4

allmon causing packet loss
by Mark Johnston 07 Jan '14

07 Jan '14

[root@KC7DMF allmon]# uptime 08:44:31 up 10:32, 1 user, load average: 5.05, 13.11, 10.29 any idea why when allmon is running the load avg is so high? Do I need something a lot more then an intel Atom @1.86Ghz to run this with allstar? I also end up with severe packet loss...

2 2

Execute Schedule Only If Certain Conditions are Met
by Tony Olivero 07 Jan '14

07 Jan '14

Hi all: As I've been playing with a node I finally got set up running on a Sheevaplug I was wondering if it's possible to schedule events, but only have them fire if conditions are met? I can think of a few ways to use this, but a quick example: schedule an hourly time announcement followed by a recorded announcement file about the club meeting that night, but do not allow it to play if RPT_TXKEYED. In other words, we don't want the announcement to play over someone talking, whether they be on a link or a local receiver. I can see how to check variables in the event management system, but I don't quite know how, or if, variables can be tied into the scheduler. The best option I can see for conditional events would be to go outside app_rpt and use cron and asterisk -rx. Using a shell script it might be possible to read in the node channel vars and fire off the desired macro through a cli command. This might also allow you to periodically check to see if the node is still in transmit, say every 15 seconds for 15 minutes, and if the node goes quiet play the announcement. If it never does, just forget about it for that hour. This is maybe a simplistic example, but I'm trying to learn the intricacies of app_rpt with the simple stuff :). Thanks for any pointers. 73, Tony AD9O

2 1

Re: [App_rpt-users] 'lsnodes' node status and control web viewer
by Doug Crompton 07 Jan '14

07 Jan '14

Ross, I looked in the database and it starts at node 2000 and obviously local private nodes would not be there so the local nodes would show the node but say 'no info' for the rest of the data because it would not be in the database. If you wanted something to show for the local nodes you could create a local database with the same format as the public one and then at each grab of the public database append it to your local database. The "database" is nothing more than a text file with four fields separated by a vertical bar one entry per line. Node|Call|Frequency|Location 27225|WA3DSP|446.1 Simplex|Richboro, PA 73 Doug WA3DSP http://www.crompton.com/hamradio From: kc7rjk(a)comcast.net To: app_rpt-users(a)ohnosec.org Date: Mon, 6 Jan 2014 14:46:43 -0800 Subject: Re: [App_rpt-users] 'lsnodes' node status and control web viewer Nice work Doug, Will or can this be setup to display (local) private 1xxx node status as well? Ross www.kc7rjk.net From: Doug Crompton Sent: Monday, January 6, 2014 2:02 PM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] 'lsnodes' node status and control web viewer I have written a Perl script web viewer which shows status of your local Allstar nodes and allows app_rpt command control as you would have from your radio. You can access this locally or from anywhere on the Internet. This is an effective but rather simple viewer which I find very useful and thats why I wanted to share it with you. I wanted something that was easy to modify and understand. I have been using this for several weeks but consider it beta code. Installation is a little involved but I think I have supplied good instructions on how to implement it. It requires httpd, PHP, and Perl on your server. Acid comes with Perl but unless you have installed httpd and PHP for other applications like Allmon you will have to install them. Included in the package is a simple command version to show connected nodes called 'lsnodes'. I welcome your comments and suggestions and I am sure there will be some evolution of the code and install instructions. I hope it is useful to you. More info, install instructions, screenshots, and the tarball are at - http://crompton.com/hamradio/allstar/lsnodes.html I primarily use firefox but I tested it with Chrome and it seems to work fine. I would not recommend explorer. Actually I wouldn't recommend explorer for anything! In firefox you can use the zoom feature to change the text size to suit your needs. It is also nice to have multiple tabs open if you have more than one node. 73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0