February 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Parallel 900MHz /data radio's
by mike＠midnighteng.com 09 Feb '14

09 Feb '14

1 0

Re: [App_rpt-users] audio radio to internet issue
by ea8ee 08 Feb '14

08 Feb '14

I use URI DMK 2014-02-08 21:22 GMT+00:00 <mike(a)midnighteng.com>: > > Your FOB is stuck. > Try unplugging (live), wait 5 seconds, and plugging back in same slot. > > If it works, I suggest a new FOB. I have had a few that continuously get > stuck and replacing them worked for me so I'm not sure what the problem > is/was. > > ...mike/kb8jnm > > -------- Original Message -------- > Subject: Re: [App_rpt-users] audio radio to internet issue > From: ea8ee <ea8ee1(a)gmail.com> > Date: Sat, February 08, 2014 2:14 pm > To: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > > I tried with cli and radio tune rxnoise and the pc says the device > usb27305 currectly not active ! any suggestion? > > > 2014-02-08 8:51 GMT+00:00 jose <ea8ee1(a)gmail.com>: > >> Hi Doug! the ptt and audio from internet to radio works nicely the >> problem is about the audio from radio to internet not audio neither the >> node receive the dmtf from radio or webstransceiver >> >> El 08/02/2014 6:31, Doug Crompton escribió: >> >> You need to set - >> >> duplex=1 ; Simplex, no telelmetry >> duplex=0 ; Simplex, telelmetry >> >> in rpt.conf if you are running simplex. >> >> Also make sure the polarity is correct in your usbradio or simpleusb file >> for the PTT and COS if you are using it. >> >> >> > ------------------------------ > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > >

1 0

passive repeater idea
by Steve Wright 08 Feb '14

08 Feb '14

No, the passive repeater has to be very very near one end of the link, and the antennas have to be huge and the EIRPs high as well. -- Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers +64 21 040 5067

1 0

Re: [App_rpt-users] audio radio to internet issue
by ea8ee 08 Feb '14

08 Feb '14

I tried with cli and radio tune rxnoise and the pc says the device usb27305 currectly not active ! any suggestion? 2014-02-08 8:51 GMT+00:00 jose <ea8ee1(a)gmail.com>: > Hi Doug! the ptt and audio from internet to radio works nicely the > problem is about the audio from radio to internet not audio neither the > node receive the dmtf from radio or webstransceiver > > El 08/02/2014 6:31, Doug Crompton escribió: > > You need to set - > > duplex=1 ; Simplex, no telelmetry > duplex=0 ; Simplex, telelmetry > > in rpt.conf if you are running simplex. > > Also make sure the polarity is correct in your usbradio or simpleusb file > for the PTT and COS if you are using it. > > >

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 60, Issue 18
by Steve Wright 08 Feb '14

08 Feb '14

> > I bought some CM108 fobs on EBAY for $0.99 each. He has a s***load of > them. Not knowing if they?d be real CM108 I waited till I got them to send > this note. The USB ID is 08dc:000c the real thing. > > EBAY auction is 300503465055 Thanks for that - will get a bunch of them. The unit appears visually to be the later model CM109.. It is inconsequential, as either will work well. Steve

1 0

Re: [App_rpt-users] source of USB CM108 FOBs - CHEAP
by pete M 08 Feb '14

08 Feb '14

too bad this link don't work here.. Envoyé depuis Windows Mail De : George Csahanin Envoyé : ‎samedi‎, ‎8‎ ‎février‎ ‎2014 ‎10‎:‎26 À : APP RPT I bought some CM108 fobs on EBAY for $0.99 each. He has a s***load of them. Not knowing if they’d be real CM108 I waited till I got them to send this note. The USB ID is 08dc:000c the real thing. The last four nodes I built up use D945 motherboards which have parallel ports, which I use for COS/PTT and the USB fob only does audio. No need to modify them for PTT and COS, etc. Anyhow, the EBAY auction is 300503465055 OR click this link Seller’s store is circle607. They’re in Hong Kong. But the postage was under $1.20 for all ten. I stocked up simply because they work so well, cost so little, and not sure when they will stop being available. (hoarding 101) GeorgeC W2DB Allstar 2360 _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Parallel 900MHz Links
by Bob - AF6D 08 Feb '14

08 Feb '14

We are finally at the last phase of our build-out with three repeater locations with minimal overlap. We want to vote and simulcast on 2 meters. I asked how I could get IRLP and EchoLink connected, as well as a weather receiver and it was suggested that I get an unvoted URI for a controller (like the RC-210's that we have) and use them to bring in outside sources. That was a great idea! But then it dawned on us that if in the event of a major earthquake or tornado or whatever the Internet would go down - and those sources too. This became even more of an important matter because we want to run a parallel 900MHz link system. We can't use the RC-210 approach because if the internet goes down so would our link. The repeaters are too far apart for building our own Ubiquity VLAN - I think. I don't know the maximum power available at 900MHz and we don't have LOS between the sites. What are some ideas on getting a parallel link system in case we lose Allstar? Thank you for helping me learn. Bob

7 7

audio radio to internet issue
by ea8ee 08 Feb '14

08 Feb '14

Hello everyone! I use a FT-8900 and a URI with the cable modem buy ke6pmv the ptt system starts when it receives audio from the Internet but not yet sent the internet radio audio also does not receive ringtones DMTF via radio nor can send DTMF from webstranceiver option, any suggestions

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 60, Issue 14
by Steve Wright 07 Feb '14

07 Feb '14

> > What are some ideas on getting a parallel link system in case we lose > Allstar? Use rmonline to do your link testing, and once you have some good looking calcs, then do some real-life testing. It may be that you will need to add an intermediate site to complete your microwave link system. Steve

1 0

RTCM single shot voting (without GPS)
by RU3AID 07 Feb '14

07 Feb '14

Well, it seems pretty easy, when the signal from sattelite recievers comes to voter, voter selects best signal just once, before it starts sending signal to transmitter, and until the signal disappears. That mode would be useful for indoor applications and as failsoft mode, when 1 pps disappears for some reason. Continuous voting without precise synchronisation would be nice too, because precise synchronisation is not necessary if network latency is minimal (if nodes located within the same building) and switching delay is not less than 1 second (50 frames), while it still much better for long distance systems, especially in urban areas or difficult terrain areas.

1 0