June 2014 - App_rpt-users - lists.keekles.org

Pulse Back
by Greg Thornwall 28 Jun '14

28 Jun '14

Hi, I sponsor an Echolink node at my QTH which is running on a Windoz PC using a Motorola radio setup to TX on the repeater input and listens to the output. I tried my IRLP/echolink node but they have a 2 sec squelch tail and I had trouble with pulse back. Is there a way or a parameter that can be set to ignore COS for 2 sec after TX? I think that would work but I'm not sure if this is possible with Allstar. Thanks, 73 Greg KD3SU

2 1

CLI help
by Robert Newberry 27 Jun '14

27 Jun '14

Can anyone tell me what this means in my CLI? [Jun 27 12:47:44] NOTICE[2177]: chan_sip.c:14418 handle_request_invite: Call from '' to extension '+901148422885410' rejected because extension not found. [Jun 27 12:48:04] WARNING[2177]: chan_sip.c:1964 retrans_pkt: Maximum retries exceeded on transmission 768cac067094ca767d045f9ac57d60d3 for seqno 1 (Critical Response) -- See doc/sip-retransmit.txt. N1XBM*CLI> So I do have to extensions setup one is my tablet (which is off) I also have my cell phone (which I have in airplane mode). Is someone trying to hack my server? Thank you

5 7

Re: [App_rpt-users] CLI help
by Robert Newberry 27 Jun '14

27 Jun '14

OK so I found the offending IP address out of South Brisdane, Queensland. They are just going thru 4 digit extensions one by one, they file is quite large. What should I do next? Block the IP and report it? On Fri, Jun 27, 2014 at 2:00 PM, DARN SIMPLE | N0PCO <n0pco(a)darnsimple.net> wrote: > As most would say "you're dealing with script kiddies" people that are > trying to find a free route for the calls among other mischievous things. > > ----------------- > > Check the file /var/log/asterisk/messages for some helpful clues where the > attempts are coming from. > > Look for SECURITY[numbercode] there should be some ip addresses on the > same line. > > You can find out more about the ip address and the subnet involved by > going to: http://mxtoolbox.com/arin.aspx and enter the ip address. > > Do you know how to set up the iptable rules? > > ------------------ > > > It's more of a nuisance than anything else. Still a good idea to learn > how to use iptables, it will make things easier in the long run. > > > Mars > > > > > > > > On 06/27/2014 11:59 AM, Robert Newberry wrote: > >> Can anyone tell me what this means in my CLI? >> >> >> [Jun 27 12:47:44] NOTICE[2177]: chan_sip.c:14418 handle_request_invite: >> Call from '' to extension '+901148422885410' rejected because extension >> not >> found. >> [Jun 27 12:48:04] WARNING[2177]: chan_sip.c:1964 retrans_pkt: Maximum >> retries exceeded on transmission 768cac067094ca767d045f9ac57d60d3 for >> seqno >> 1 (Critical Response) -- See doc/sip-retransmit.txt. >> N1XBM*CLI> >> >> So I do have to extensions setup one is my tablet (which is off) I also >> have my cell phone (which I have in airplane mode). Is someone trying to >> hack my server? >> >> Thank you >> >> >> >

4 5

BBB fork
by Ken 27 Jun '14

27 Jun '14

Well said! Forks are not progress. The Allstar community is better served if the smart guys work together towards building a better system. -- Tim :wq On Jun 26, 2014, at 3:03 PM, David McGough <kb4fxc(a)inttek.net> wrote: I, for one, hope this isn't another fork in the road. I hope it's just another step in the evolution of this already fantastic radio/repeater control and VoIP solution you envisioned. ========================= Ummm - as I understand it, app_rpt is *itself* a fork off of Asterisk 1.4 and has not been compatible with the production versions of asterisk for quite some years now. http://ohnosec.org/drupal/node/72 73 Ken

1 0

about once a week...
by Geoff 27 Jun '14

27 Jun '14

... I get an error. This morning it was: [Jun 27 06:50:16] NOTICE[11563]: app_rpt.c:8825 rpt_tele_thread: Telemetry thread aborted at line 8825, mode: 46 and a several pages full of the same notices. Whassup?

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 64, Issue 55
by Bradley Haney 26 Jun '14

26 Jun '14

Can you run 2 nodes on this platform? On Thu, Jun 26, 2014 at 11:00 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: BeagleBone Black Allstar Official Release (David KE6UPI) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 26 Jun 2014 08:24:51 -0700 > From: David KE6UPI <dshaw(a)ke6upi.com> > To: Doug Crompton <doug(a)crompton.com> > Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] BeagleBone Black Allstar Official Release > Message-ID: > <CAH4RvbLm-z3yKQpM1NriVZ= > 8PAS_2iaHReaUy4jNMB2FdTv0hQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Nice write up Doug.. When I get back in Aug I think I'll give it a try.. > > KE6UPI > David > > > On Wed, Jun 25, 2014 at 10:02 PM, Doug Crompton <doug(a)crompton.com> wrote: > > > Hello and welcome to the first public release of Allstar on the > BeagleBone > > Black. This represents months of trial and error testing which first > > started with the Raspberry Pi back at the beginning of the year and was > > finally successful on the BBB platform. We have had several beta versions > > out now for over two months with many testers and we had very good > reports. > > There is more to be done but this is a working system that will allow > many > > to get rid of their energy consuming PC's with constantly running hard > > drives and have an Allstar system that fits in the palm of your hand. > > > > The web page I have created gives very detailed instructions on how to > > download, install, and configure your BBB for use with Allstar. The web > > page is: > > > > hamvoip.org > > > > There you will find a link to download the image and also to join the > > arm-allstar email list. Please try to address questions specific to the > BBB > > and Allstar to the arm-allstar list and not the apt-rpt list. > > > > While the code is the current Acid release there are many differences in > > how things are done on the BBB and the OS we are using, Arch Linux, is > much > > different than Centos or Debian. Please refer to the web page for > detailed > > info on some of the differences. We also recommend that you NOT use the > > nodesetup routine that is offered on the standard Acid release. In many > > ways this is faulty and often more trouble than it is worth. For that > > reason we have renamed nodesteup on the image and made it non-executable. > > Besides what is described on the web page there is a very detailed how-to > > describing first time setup of the config files. We encourage you to edit > > the existing config files rather than wholesale copying your existing > > configs on top of the examples. There is a little learning involved but > in > > the long run it is good to know how things work by configuring the files > on > > your own. > > > > We also encourage you to make image backups once you have your system > > configured. This will avoid having to recreate your configuration should > a > > failure of some kind occur. While we have not seen any problems with > power > > failures and as far as we know not one SD card has ever failed running > > Allstar there is always a first time and better safe than sorry. > > > > This release does not have the backup/restore scripts that we promised > but > > they will be available soon. Basically what they will do is copy > > /etc/asterisk and all directories under it in entirety into a tar file > and > > then you would use winscp or a similar file copy program to transfer the > > tar file to another computer. This would allow you to make updates of the > > image when new code is released in the future without losing your former > > configuration. For now you can do this manually. See the howto on the web > > page for instructions on doing image and directory backups. It is not > hard > > to do and well worth the piece of mind. > > > > Have fun and I hope you enjoy your new BBB Allstar node. There will be > > many more features and upgrades available in the future all of which will > > be announced on the arm-allstar email list. There are already plenty of > > experienced users on the list that can help you with any problems you > might > > have. > > > > 73 Doug, WA3DSP > > > > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > down > > to the bottom of the page. Enter your email address and press the > > "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message to > > the list detailing the problem. > > >

2 1

Transmit Beeps and ID's without PL tones
by Skyler F 25 Jun '14

25 Jun '14

Hi, Is there any way to transmit the CW ID and the courtesy beeps without PL tone, that is Drop the tone when there is the Beeps and ID's, but still have a transmitting tone other times? -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

2 1

Re: [App_rpt-users] rxondelay command
by Steve Denbow 25 Jun '14

25 Jun '14

This tells asterisk to ignore a receive signal when first detected for x amount of time. You have 75 multiples of 20ms which is 1500ms or 1.5 seconds. Try a value of 10 or so which would be closer to 1/4 of a second. Sent from Droid mobile

1 0

Re: [App_rpt-users] Question
by mike＠midnighteng.com 25 Jun '14

25 Jun '14

1 0

Question
by Cristian González Flores 25 Jun '14

25 Jun '14

HI everyone I will explain to you what we want to do, for you can confirm to us what we need to do please. For our final test to graduate from college, we think to integrate an VoIP system with and RF system, for that, we are setting up an environment with Cisco switches and routers. In this moment we have the PC for Asterisk software acting as a PBX, the idea is register IP Phones, Softphones and in adition connect via URI interface tho the GM300 for calling from the VoIP environment (ip phones and softphones) to the radio stations. So, you tell us about the ACID ISO image, but in the allstar website said we need to register a node, we dont understand that, we only need to setup a server with asterisk for register phone devices and connect trought URI to GM300. I hope yo can understand what we need to do and you can help us a little bit. Even if is necessary we can pay por a service of configuring or explain the procedure to us. Best Regards!!!

1 0