December 2015 - App_rpt-users - lists.keekles.org

Redundancy
by Robert Newberry 26 Dec '15

26 Dec '15

I was talking with another sysop on our little network up here. Occasionally some little internet hiccup will cause the network to go down at the hub we use. We also rely on allmon2 for "command and control" Is it possible in asterisk if there is a problem with the network connection at the system hub to automatically shift the connected repeaters somewhere else? Allmon2 two isn't an issue since we can leave that running full time at the "backup location" and we can just access it from the alternate address. Currently we manually shift everything and it doesn't happen often. I was just wondering if anyone has automated it. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658

1 0

Re: [App_rpt-users] Android IAX client for AllStar
by Steve Zingman 26 Dec '15

26 Dec '15

What phone and version of Android? 73, Steve N4IRS Sent via smoke signal (Verizon) On Dec 26, 2015 2:25 AM, Sione Ragle <ke6sth(a)ke6sth.ampr.org> wrote: I was giving this app a try on my cell phone, when I connect the app_rpt PTT goes active and there was no indication that my repeater PTT was stuck on, to stop it I had to push the PTT on the phone to keyup and PTT again to unkey then the app_rpt will unkey. I tested it, and it happens even time the phone connects to asterisk box the asterisk PTT will go active and you dont even push the PTT on the phone for this to happen.. --Sione On 9/21/2015 6:02 PM, Steve Zingman wrote: New version to test: Add connected node to number status screen. Mute transmitted audio while PTT not asserted. (This will work with nodes setup for VOX) Added exit to option menu. Slight change to keypad. Added keys A B C D. Version 1.6 We have built a early beta version of a Android IAXRPT Client. This is a simple Android app that will connect with a AllStar Asterisk node. Think IAXRPT for Android. It has a PTT button! <https://www.dropbox.com/s/3ey9u0tvtdedgh4/AndroVoIP.apk?dl=0> This is a early build. There are a lot of feature to add and I'm sure bugs. The client only supports ulaw at this time. For backspace use the virtual keyboard. Press Send to send commands and node numbers. There is only one account supported. To create an account, tap the Account button, Tap IAX2 No Account defined to open the account dialog. Hostname: FQDN or IP address of the server. Port: UDP default is 4569 Username: matching iax.conf stanza Password: matching iax.conf stanza CallerID: this can be displayed in Allmon and the AllStar node status page. Caller Number: not used yet. Save: Press to save account information. Press back button to go to main screen. Enter node number and press send. PTT bar will be white while connected to node red whie transmitting. See<https://github.com/N4IRS/AllStar/blob/master/configs/iax.conf> for iaxclient stanza See <https://github.com/N4IRS/AllStar/blob/master/configs/extensions.conf> for iax-client stanza Feel free to download and try out. Please report bugs and feature to me. I will also be happy to answer questions here on the list. 73, Steve N4IRS _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 2

Android IAX client for AllStar
by Steve Zingman 26 Dec '15

26 Dec '15

New version to test: Add connected node to number status screen. Mute transmitted audio while PTT not asserted. (This will work with nodes setup for VOX) Added exit to option menu. Slight change to keypad. Added keys A B C D. Version 1.6 We have built a early beta version of a Android IAXRPT Client. This is a simple Android app that will connect with a AllStar Asterisk node. Think IAXRPT for Android. It has a PTT button! <https://www.dropbox.com/s/3ey9u0tvtdedgh4/AndroVoIP.apk?dl=0> This is a early build. There are a lot of feature to add and I'm sure bugs. The client only supports ulaw at this time. For backspace use the virtual keyboard. Press Send to send commands and node numbers. There is only one account supported. To create an account, tap the Account button, Tap IAX2 No Account defined to open the account dialog. Hostname: FQDN or IP address of the server. Port: UDP default is 4569 Username: matching iax.conf stanza Password: matching iax.conf stanza CallerID: this can be displayed in Allmon and the AllStar node status page. Caller Number: not used yet. Save: Press to save account information. Press back button to go to main screen. Enter node number and press send. PTT bar will be white while connected to node red whie transmitting. See<https://github.com/N4IRS/AllStar/blob/master/configs/iax.conf> for iaxclient stanza See <https://github.com/N4IRS/AllStar/blob/master/configs/extensions.conf> for iax-client stanza Feel free to download and try out. Please report bugs and feature to me. I will also be happy to answer questions here on the list. 73, Steve N4IRS -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

2 1

BBB_Allstar_v1.2.1 Will Not Boot
by Birton 24 Dec '15

24 Dec '15

Hi, Using these instructions, I've tried to reload my BBB with the new version. http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/#image Hardware: BBB Rev C SDCARD: 8bg Actions: 1. Burned the img to 2 different cards (including the one I'm running) using Win32Imager 2. Burned the img to 2 different cards (including the one I'm running) using linux dd Result: 1. Blue Power Light on 2. NO Other Blue Light Activity 3. NO Boot 4. Nothing on HDMI Display Fall back: Re-Burned the original image to same card and system back running. Suggestions? Birton, N6UG

2 1

RTCM asterisk config help
by James Cizek 24 Dec '15

24 Dec '15

Hi all, After much learning and testing, I finally had a configuration that was working using RTCMs as both transmit nodes and voter nodes. I decided to start fresh with clean configs as I was close to rolling this all out at the repeater sites. Somehow, somewhere along the way, I have screwed up something. To simplify narrowing the problem down, I've dumped the voter and am just trying to get back to a simple, standalone repeater. The RTCMs are logging into the server OK (Using the latest DIAL distribution), the yellow "Host" light is lit on each RTCM. When I transmit to the RTCM connected repeater, I see the green RX light on the RTCM light (I have removed all CTCSS requirements at this point also), but it's not transmitting back out (ie, no red TX light, never keys repeater TX). The TX works fine, as when I drop asterisk on the server, the host light extinguishes and I get the "offline" string in CW out on the transmitter. I know I am missing something (something I *had* working!!). I have a pretty large rpt.conf, but removed all of what I believe(hope) is irrelevant to this question and have listed only the lines I believe should be needed in voter.conf and rpt.conf. The one thing that is different is that I am no longer seeing voter_chan initialize in the /var/log/asterisk/messages file. I see my node come up in the logfile by app_rpt, but never by chan_voter. Can someone help me keep the last hair on my head from tearing out and help me understand what I have missed on my new config? I just can't believe I had all this complicated stuff working, and now can't get back to the simplest of all of it :) Many thanks. 73 James KI0KN Relevant file sections below: (real password changed to XXXX) ------------------------------------------ voter.conf: [general] port = 667 buflen = 100 password = XXXXX [5115] client1 = XXXX,transmit plfilter = y ------------------------------------------ ------------------------------------------ rpt.conf: [5115] rxchannel = Voter/5115 ------------------------------------------

1 0

Voter boards for sale
by Mihhail Jakovlev 23 Dec '15

23 Dec '15

Hello all, I have 5pcs of voter boards, all working. Not needed more because I use other way for connecting my repeater and Android devices. Please write me if any have interest. Price 400usd for 5pcs Regards, Mihhail Jakovlev ________________________________ Sent from my LG Android phone

4 3

Re: [App_rpt-users] Voter boards for sale
by Mihhail Jakovlev 23 Dec '15

23 Dec '15

4pcs availible Regards, Mihhail Jakovlev ________________________________ Sent from my LG Android phone From: <app_rpt-users-bounces(a)ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org>> on behalf of Mihhail Jakovlev <mihhail.jakovlev(a)telegrupp.ee<mailto:mihhail.jakovlev@telegrupp.ee>> Date: Tuesday, December 22, 2015 at 10:06 AM To: "app_rpt-users(a)ohnosec.org<mailto:app_rpt-users@ohnosec.org>" <app_rpt-users(a)ohnosec.org<mailto:app_rpt-users@ohnosec.org>> Subject: [App_rpt-users] Voter boards for sale Hello all, I have 5pcs of voter boards, all working. Not needed more because I use other way for connecting my repeater and Android devices. Please write me if any have interest. Price 400usd for 5pcs Regards, Mihhail Jakovlev ________________________________ Sent from my LG Android phone _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Raspberry Pi echolink
by Scott Weis 22 Dec '15

22 Dec '15

I just installed a raspberry pi and would like echolink on it. When I run a working echolink.conf file from ACID I get -- Received OK from Echolink server servers.echolink.org [Dec 20 22:10:00] ERROR[275]: chan_echolink.c:2393 do_el_directory: Error in parsing header on servers.echolink.org and the system never show up in the echolink directory. Any ideas?

2 2

Frequent Warning Messages
by Steve Mahler 22 Dec '15

22 Dec '15

Good day and Merry Christmas! I moved our ACID AllStar PC to the repeater site yesterday. The interconnect to the radios should happen soon. While testing the install I noted the following (below) very frequent repetition of Warning Messages. Is this normal? If not, what should I be looking at to fix the problem. ...STeve -KF5VH [Dec 22 06:06:36] WARNING[3080]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest -- Received OK from Echolink server server2.echolink.org -- Received OK from Echolink server server1.echolink.org -- Directory pgm done downloading(partial,compressed), 475 records [Dec 22 06:07:18] WARNING[3084]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42316' [Dec 22 06:07:18] WARNING[3077]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:07:26] WARNING[3080]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42319' [Dec 22 06:07:26] WARNING[3082]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:08:08] WARNING[3077]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42316' [Dec 22 06:08:08] WARNING[3078]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:08:16] WARNING[3082]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42319' [Dec 22 06:08:16] WARNING[3084]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:08:58] WARNING[3078]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42316' [Dec 22 06:08:58] WARNING[3080]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:09:06] WARNING[3084]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42319' [Dec 22 06:09:06] WARNING[3077]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:09:48] WARNING[3080]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42316' [Dec 22 06:09:48] WARNING[3082]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:09:56] WARNING[3077]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42319' [Dec 22 06:09:56] WARNING[3078]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:10:38] WARNING[3085]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42316' [Dec 22 06:10:38] WARNING[3076]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 22 06:10:46] WARNING[3081]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42319' [Dec 22 06:10:47] WARNING[3083]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest -- Received OK from Echolink server server1.echolink.org -- Directory pgm done downloading(partial,compressed), 497 records [Dec 22 06:11:28] WARNING[3076]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '42316'

1 0

Repeater reporting time every few minutes
by kk6ecm 22 Dec '15

22 Dec '15

We have an ACID based repeater reporting time every few minutes following a soft reboot. Any thoughts? Thanks, r/Bob kk6ecm

2 2