December 2015 - App_rpt-users - lists.keekles.org

tailmessagelist=
by Wayne 21 Dec '15

21 Dec '15

Hi all and Happy Holidays! Using an RPI2, does anyone know why the tailmessagelist = does not rotate the messages. It will play the first one on the list and not rotate to the next one. If I switch the list around making a different message first it will play that one but not rotate to the next. I've hunted around the available documentation online but can find no explanation or if I've missed a step someone. Thank Wayne --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

5 4

Allstar keeps dropping connection
by R. Wayne 21 Dec '15

21 Dec '15

I am still getting my feet wet on Allstar and have run into an issue of it resetting the connection or just dropping it. I am using the Web Transceiver but I don’t think that’s the issue since I am watching the server actually drop through an SSH session. Anything to check?

2 1

Garmin GPS 18 LVC RTCM wiring
by Skyler F 19 Dec '15

19 Dec '15

I am now going to solder the Garmin 18x GPS to the DB15 connector for the RTCM. I am a little confused by the labels so is this pinout correct? RTCM --- GPS GRX ----- TXD GPPS ---- GND ------ GND +5V ----- Input Voltage GTX ----- RCV RST ----- Is this correct? There is also a "measurement Pulse Output" wire, but I don't know what to do with that. Garmin GPS 18 wiring http://wiki.elphel.com/images/thumb/f/fb/Garmin_gps18x_wiring.jpeg/500px-Ga…

2 1

Re: [App_rpt-users] Garmin GPS 18 LVC RTCM wiring
by Skyler F 18 Dec '15

18 Dec '15

Nevermind, I found this on the archives, I am going to use this RTCM GPS 18x LVC 6 GRX <-- Rx Data 6 Green 7 GPPS <-- Pulse Output 1 Yellow 8 GND Ground 3 Black 8 GND Ground 5 Black 13 +5V --> Vin 2 Red 14 GTX --> TX Data 4 White On Fri, Dec 18, 2015 at 2:00 PM, Skyler F <electricity440(a)gmail.com> wrote: > Thanks, Do you think I am right on the everything else, the GRX and the > GTX ( does rx connect to tx or does rx connect to rx) > > On Fri, Dec 18, 2015 at 1:51 PM, Steven Donegan <donegan(a)donegan.org> > wrote: > >> The GPPS is likely designed to connect to a GPS Pulse Per Second - which >> is likely the measured pulse thing... >> >> Caveat - I know nothing about the RTCM, but I do know some about >> interfacing GPS modules for other purposes. >> >> Steven Donegan >> KK6IVC General Class FCC License >> PP-ASEL >> Silver State Car #86 >> www.sscc.us >> >> ------------------------------ >> *From:* Skyler F <electricity440(a)gmail.com> >> *To:* "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> >> *Sent:* Friday, December 18, 2015 12:47 PM >> *Subject:* [App_rpt-users] Garmin GPS 18 LVC RTCM wiring >> >> I am now going to solder the Garmin 18x GPS to the DB15 connector for the >> RTCM. >> >> I am a little confused by the labels so is this pinout correct? >> >> RTCM --- GPS >> >> GRX ----- TXD >> GPPS ---- >> GND ------ GND >> +5V ----- Input Voltage >> GTX ----- RCV >> RST ----- >> >> Is this correct? There is also a "measurement Pulse Output" wire, but I >> don't know what to do with that. >> >> Garmin GPS 18 wiring >> >> http://wiki.elphel.com/images/thumb/f/fb/Garmin_gps18x_wiring.jpeg/500px-Ga… >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email address and >> press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> >> > > > -- > Skyler Fennell > amsatnet.info > KDØWHB > electricity440(a)gmail.com > -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

1 0

SIP CT
by Ken 18 Dec '15

18 Dec '15

I don't think SIP has a CT. SIP connections are full duplex; it's pointless to have an "over" beep. 73 Ken -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: Thursday, December 17, 2015 12:00 PM To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 82, Issue 39 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

5 6

Working on a URI-X breakout - what else would you like?
by Steven Donegan 18 Dec '15

18 Dec '15

Attached is a circuit design that covers breaking out the URI-X pins, supporting the EEPROM, a COS generator for radios which do not have one OR you don't want to hack the radio. What else might be useful on this board design? When it is 'done' I will have boards made and folks can buy them if desired. And Merry Christmas/Happy New Years BTW - please critique/validate the design. Steven Donegan KK6IVC General Class FCC License PP-ASEL Silver State Car #86 www.sscc.us

2 1

Courtesy Tone when SIP connection unkeys
by Mike M 17 Dec '15

17 Dec '15

I have a private allstar node set up that allows a SIP connection. No matter what I do I can't seem to get allstar to TX a courtesy tone on the radio when the SIP connection unkeys. I feel like I've done this before but I've set every courtesy tone to a valid tone in rpt.conf and I get CT if the radio unkeys, but not if the SIP connection unkeys. Is this just not possible or am I being dumb? Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org

3 4

rc.updatenodelist
by Loren Tedford 16 Dec '15

16 Dec '15

Greetings!! I found an issue here today with rc.updatenodelist for some reason their was multiple pids with multiple instances of this running on my server so here is what i did to fix this problem. in side /etc/asterisk/ folder i created a directory called scripts Example mkdir scripts then inside this directory i created a script called nodelistupdate.sh Example nano nodelistupdate.sh Once nano has opened up here is what i put inside the script. #!/bin/sh killall /usr/local/bin/rc.updatenodelist sleep 2s killall rc.updatenodelist sleep 4s /usr/local/bin/rc.updatenodelist ## Exit nano by ctrl x and saving changes with a y Next i updated crontab-e to point to my directory and location of my script */30 * * * * sh /etc/asterisk/scripts/nodelistupdate.sh This so far has worked for me and has decreased memory by almost half on my server.. I hope this helps some one out that is having issues with this process running away with its self 73's Have a Merry Christmas!! Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Main Line:1-631-686-8878 Option 1 for Loren. Fax Line 1:1-618-551-2755 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

4 7

DIAL RPI2
by Robert Newberry 16 Dec '15

16 Dec '15

I noticed astres.sh does not work on the computer mentioned in my subject line. How do I restart asterisk. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086

4 3

DIAL manual install from Debian
by Skyler F 14 Dec '15

14 Dec '15

Does anybody have or know where there are scripts to install AllStar from Debian. For a setup for a repeater site am using a server computer with two hard drives in a RAID1 configuration so if one is to fail on this 10 year old machine, it will still work. I was not able to get DIAL installed but was able to get Debian to work. Thanks Skyler KD0WHB

5 8