July 2017 - App_rpt-users - lists.keekles.org

APRS not connecting
by Bob Roszkowski 25 Jul '17

25 Jul '17

I've noticed on a couple of my nodes that APRS was not able to connect. Error in CLI and messages show: WARNING[647] app_gps.c: server second.aprs.net cannot be found!! WARNING[648] app_gps.c: Attempt to send APRS data with no connection open!! I've had this running for quite some time without problems and no changes to config. I can ping second.aprs.net (and rotate.aprs.net) and get a reply. Also changed config to rotate.aprs.net with no change. Anyone else seeing this. It errors out all day long and filling up my logs. Sincerely, boB - W5EVH

2 1

Changed Email Address!
by Loren Tedford 25 Jul '17

25 Jul '17

Greetings Everyone, I enjoy emailing everyone in helping with the installation of allstarlink however I have recently made some changes to the way my email is delivered through the app_rpt user system.. If you have an Emergency and need to personally email me fast. Please use lorentedford(a)gmail.com Now regarding the transition to my new email address which is loren(a)lorentedford.com i will still check this but only 3 times a day.. My gmail is now setup to directly go to my phone! I hope everyone understands why I changed my main email in the app_rpt system.. Again keep up the great work and always enjoy every email i have seen through the list! Please if their is anything i can do to help let me know! Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Email: KC9ZHV(a)KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com

1 0

Kenwood TH-D7 Duplex Node?
by Ramesh Dhami 23 Jul '17

23 Jul '17

Hi All: Wonder if anyone is using a Kenwood TH-D7A (or may be an 'E') for a duplex node? The 'D7 could make for a good node, since it has the ability to operate in full duplex (RX on Band 'A' and TX on Band 'B'). I'd like to know if there is a way to bypass the internal TNC, or to bring out 9600 baud audio (or raw discrim audio) out somehow. I was initially using a pair of Baofeng's for a portable / full-duplex node... but the Baofeng's are as deaf as a potato! Cheers! Ramesh, VA3UV #27919 and a truck load of others....

2 2

Source Code WA3DSP
by Skyler F 23 Jul '17

23 Jul '17

Hmm, maybe if Doug just released what he claims to hate about IRLP .... http://kd0whb.duckdns.org/doug_crompton.wav As far as the last time I requested when I could grab the source code a few weeks ago, I was only responded with " I don't have a time-line on the release". Source http://www.qsotoday.com/podcasts/wa3dsp Time: 36:30

14 19

Looks like I can't post no more on a ARM mailing list.
by Pierre Martel 22 Jul '17

22 Jul '17

Must be because I asked about source a bit too much. Am I the only one that was put under " control " like that? Pierre VE2PF

8 8

Re: [App_rpt-users] App_rpt-users Digest, Vol 101, Issue 27
by Richard larson 21 Jul '17

21 Jul '17

Yes. Here is what is in my modules.conf file thanks Rich W6ABJ [modules] autoload=yes noload=chan_oss.so noload=chan_alsa.so noload=chan_phone.so load=chan_usbradio.so ; USB Console Channel Drive noload=func_moh.so noload=res_musiconhold.so noload=res_speech.so ;noload=res_crypto.so noload=res_odbc.so noload=res_smdi.so noload=res_config_odbc.so noload=chan_tlb.so noload=app_milliwatt.so noload=app_image.so noload=app_sendtext.so noload=format_h264.so noload=app_hasnewvoicemail.so noload=app_ices.so noload=app_lookupblacklist.so noload=app_voicemail.so noload=chan_usrp.so noload=app_lookupidname.so noload=app_zapateller.so noload=format_jpeg.so noload=app_parkandannounce.so noload=app_meetme.so noload=app_settransfercapability.so noload=app_amd.so noload=app_followme.so ;noload=chan_echolink.so noload=app_transfer.so ;noload=func_callerid.so noload=app_directed_pickup.so ;noload=chan_voter.so noload=app_flash.so noload=app_page.so noload=app_gps.so noload=pbx_dundi.so noload=app_setcallerid.so noload=app_dictate.so noload=res_adsi.so noload=app_mp3.so noload=app_privacy.so noload=app_disa.so noload=app_alarmreceiver.so noload=app_externalirv.so noload=chan_beagle.so noload=chan_sip.so [global] On Fri, Jul 21, 2017 at 9:00 AM, < app_rpt-users-request(a)lists.allstarlink.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)lists.allstarlink.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ > rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)lists.allstarlink.org > > You can reach the person managing the list at > app_rpt-users-owner(a)lists.allstarlink.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > This site is dedicated to the memory of Jim Dixon WB6NIL > > > Today's Topics: > > 1. usbradio (Richard larson) > 2. Re: usbradio (Bryan Fields) > 3. Re: usbradio (Ramesh Dhami) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 20 Jul 2017 16:14:56 -0700 > From: Richard larson <wile2u(a)gmail.com> > To: app_rpt-users(a)lists.allstarlink.org > Subject: [App_rpt-users] usbradio > Message-ID: > <CABUMwzagdF8evYBd_fN6Qf0kDNqijeMTtzjF6e9UmAvHRqT > 24A(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I am attempting to convert from simpleusb to usbradio and this is what i am > getting > Thanks, Rich W6ABJ > > > Connected to Asterisk 1.4.23-pre.hamvoip-V1.5.3-12- > app_rpt-0.327-07/16/2017 > currently running on w6abj-allstar (pid = 1913) > Verbosity is at least 3 > [Jul 20 16:11:32] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread > restarted on 27837 > [Jul 20 16:11:32] WARNING[1921]: app_rpt.c:20548 rpt_master: -- > Re-Loading config for repeater 27837 > rpt_thread restarted on node 27837 > [Jul 20 16:11:32] WARNING[1943]: channel.c:3037 ast_request: No channel > type registered for 'Radio' > [Jul 20 16:11:34] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread > restarted on 27837 > -- Re-Loading config for repeater 27837 > [Jul 20 16:11:34] WARNING[1921]: app_rpt.c:20548 rpt_master: rpt_thread > restarted on node 27837 > [Jul 20 16:11:34] WARNING[1944]: channel.c:3037 ast_request: No channel > type registered for 'Radio' > [Jul 20 16:11:36] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread > restarted on 27837 > -- Re-Loading config for repeater 27837 > [Jul 20 16:11:36] WARNING[1921]: app_rpt.c:20548 rpt_master: rpt_thread > restarted on node 27837 > [Jul 20 16:11:36] WARNING[1945]: channel.c:3037 ast_request: No channel > type registered for 'Radio' > [Jul 20 16:11:38] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread > restarted on 27837 > [Jul 20 16:11:38] WARNING[1921]: app_rpt.c:20548 rpt_master: rpt_thread > restarted on node 27837 > -- Re-Loading config for repeater 27837 > [Jul 20 16:11:38] WARNING[1946]: channel.c:3037 ast_request: No channel > type registered for 'Radio' > [Jul 20 16:11:40] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread > restarted on 27837 > -- Re-Loading config for repeater 27837 > [Jul 20 16:11:40] WARNING[1921]: app_rpt.c:20548 rpt_master: rpt_thread > restarted on node 27837 > [Jul 20 16:11:40] WARNING[1947]: channel.c:3037 ast_request: No channel > type registered for 'Radio' > [Jul 20 16:11:42] ERROR[1921]: app_rpt.c:20531 rpt_master: Continual RPT > thread restarts, killing Asterisk > w6abj-allstar*CLI> >

1 0

usbradio
by Richard larson 20 Jul '17

20 Jul '17

I am attempting to convert from simpleusb to usbradio and this is what i am getting Thanks, Rich W6ABJ Connected to Asterisk 1.4.23-pre.hamvoip-V1.5.3-12-app_rpt-0.327-07/16/2017 currently running on w6abj-allstar (pid = 1913) Verbosity is at least 3 [Jul 20 16:11:32] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread restarted on 27837 [Jul 20 16:11:32] WARNING[1921]: app_rpt.c:20548 rpt_master: -- Re-Loading config for repeater 27837 rpt_thread restarted on node 27837 [Jul 20 16:11:32] WARNING[1943]: channel.c:3037 ast_request: No channel type registered for 'Radio' [Jul 20 16:11:34] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread restarted on 27837 -- Re-Loading config for repeater 27837 [Jul 20 16:11:34] WARNING[1921]: app_rpt.c:20548 rpt_master: rpt_thread restarted on node 27837 [Jul 20 16:11:34] WARNING[1944]: channel.c:3037 ast_request: No channel type registered for 'Radio' [Jul 20 16:11:36] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread restarted on 27837 -- Re-Loading config for repeater 27837 [Jul 20 16:11:36] WARNING[1921]: app_rpt.c:20548 rpt_master: rpt_thread restarted on node 27837 [Jul 20 16:11:36] WARNING[1945]: channel.c:3037 ast_request: No channel type registered for 'Radio' [Jul 20 16:11:38] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread restarted on 27837 [Jul 20 16:11:38] WARNING[1921]: app_rpt.c:20548 rpt_master: rpt_thread restarted on node 27837 -- Re-Loading config for repeater 27837 [Jul 20 16:11:38] WARNING[1946]: channel.c:3037 ast_request: No channel type registered for 'Radio' [Jul 20 16:11:40] NOTICE[1921]: app_rpt.c:20536 rpt_master: RPT thread restarted on 27837 -- Re-Loading config for repeater 27837 [Jul 20 16:11:40] WARNING[1921]: app_rpt.c:20548 rpt_master: rpt_thread restarted on node 27837 [Jul 20 16:11:40] WARNING[1947]: channel.c:3037 ast_request: No channel type registered for 'Radio' [Jul 20 16:11:42] ERROR[1921]: app_rpt.c:20531 rpt_master: Continual RPT thread restarts, killing Asterisk w6abj-allstar*CLI>

3 2

Nodes unregistered
by Paul 16 Jul '17

16 Jul '17

after a power failure my nodes are stuck in an unregistered state: test*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 27834 <Unregistered> 60 Request Sent 67.215.233.178:4569 N 27665 <Unregistered> 60 Request Sent test*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 27834 <Unregistered> 60 Timeout 67.215.233.178:4569 N 27665 <Unregistered> 60 Timeout I checked the password and they seem to be ok. netstat does not show any connections to the register server. any ideas what is happening. how to fix it and how to keep this from happening again. we had the same issue on this node and on another node previously. it is an ACID install. thanks paul n5faz

2 1

RTCM Going Off Line - Trimble Loosing Lock
by Tim Sawyer 16 Jul '17

16 Jul '17

My RTCM, two of then actually on the same Trimble, are loosing lock of late. The output from the RTCM Debug mode 40 is shown below. I read that all zeros was good but I'm wondering 08 and 04 in the last byte mean. Does any know how to decode this? GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08 GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08 GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08 GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08 GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08 GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08 GPS-DEBUG: TSIP: ok 0, 9 - 14: 00 00 00 00 00 04 07/10/2017 20:08:22.160 GPS signal lost entirely. Starting again... 07/10/2017 20:08:22.160 Host Connection Lost (Pri) (192.168.1.6) GPS-DEBUG: TSIP: ok 0, 9 - 14: 00 00 00 00 00 04 GPS Receiver Active, waiting for aquisition GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00 GPS signal acquired GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00 07/10/2017 20:08:26.160 Time now syncronized to GPS GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00 07/10/2017 20:08:26.500 Host Connection established (Pri) (192.168.1.6) GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00 GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00 -- -- Tim

5 8

Re: [App_rpt-users] DIAL Download site (dvswitch.org) offline
by ars.w5omr＠gmail.com 13 Jul '17

13 Jul '17

Thanks. I stand corrected. I will support Loren's site and efforts. On Jul 12, 2017 9:38 PM, Pierre Martel <petem001(a)gmail.com> wrote: > > Dont let the other guy bully you.. If he wanted the name he just had to reserved it.. If he want it that bad, let him know your price ;-) nothing lower then 7 figure and starting by a 9, think this would be about right ;-) > > Le mer. 12 juil. 2017 à 12:53, Loren Tedford <lorentedford(a)gmail.com> a écrit : >> >> Jeremy I'm very sorry I kind of snapped yesterday really bad day overall lots of doctors appointments and family issues going on. However I really wanted to clear up the other website Crompton's site to make sure everyone knows that I am not affiliated with it.. Please forgive me if I sound a little harsh last night because that was not the intent if it's just the correct. Hopefully after your last night's post I won't hear any more about threatening letters or things of that nature and maybe some of my phone calls will stop that I get. >> >> Thanks again and I'm very sorry if I came across a little harsh. >> >> Loren Tedford (KC9ZHV) >> Email: lorentedford(a)gmail.com >> Phone: >> Fax: >> http://www.lorentedford.com >> http://kc9zhv.com >> >> Sent from Droid Turbo from Verizon wireless network >> >> >> On Jul 12, 2017 11:38 AM, "Jeremy Utley" <jerutley(a)gmail.com> wrote: >>> >>> I apologize, Loren! Hope I did not offend too badly! >>> >>> Jeremy >>> >>> On Tue, Jul 11, 2017 at 11:45 PM, Loren Tedford <lorentedford(a)gmail.com> wrote: >>> > Jeremy is mostly correct.. I will fully correct here.. >>> > >>> > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- >>> > >>> > What was said.. >>> > >>> > Nope, Crompton’s site is “hamvoip.com”. voipham.com is Loren Tedford’s >>> > site, as he confirmed on list a couple days ago. >>> > >>> > >>> > >>> > Back to work… >>> > >>> > >>> > What should have been said.. >>> > >>> > Nope, Crompton’s site is “hamvoip.com”. voipham.com is Loren Tedford’s >>> > site, as she confirmed on list a couple days ago. >>> > >>> > >>> > >>> > Back to work… >>> > >>> > >>> > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- >>> > >>> > Now.. At the time of purchase we had no knowledge that Crompton's site was >>> > hamvoip.com.. We purchased voipham.com about 8 weeks before releasing it to >>> > the public.. The purpose was to chat about everything voice over ip >>> > related.. We would love to create a forwarding link to Crompton's site >>> > however after release of the site I was told that i was degrading the >>> > product.. As listed below.. After the release to the public we did visit >>> > hamvoip.com to see if it was anything close to our site and it was not at >>> > the time.. We also noted that improper forwarding techniques were applied >>> > and it just seemed like a forward to Cromptons main domain.. Like a third >>> > party provider link.. >>> > >>> > >>> > https://drive.google.com/file/d/0B1OnQtMWFhtcV2Z4NDBrY3J6RkE/view?usp=shari… >>> > >>> > >>> > Now moving forward.. I have no issue with Crompton or his images but after >>> > reading his emails I wish to stay clear of his versions of allstar.. Like I >>> > said i created voipham.com for one purpose and that was to help support >>> > other ham operators in the hobby and create a forum base where others can >>> > search and find maybe what they are looking for.. Also the idea was maybe to >>> > post videos and if allstarlink wanted a backup repo for allstarlink as a >>> > just in case event since I host multiple sites for many projects across the >>> > board.. >>> > >>> > >>> > >>> > Now you all know that I am a YL operator just trying to help out other hams >>> > and mean no harm.. However I will continue hosting my site regardless of the >>> > threatening emails i get regarding my site.. Also I would like to ask again >>> > if their is some thing i can help with. >>> > >>> > >>> > Thanks again! >>> > >>> > >>> > >>> > >>> > Loren Tedford (KC9ZHV) >>> > Phone:618-553-0806 >>> > Fax: 1-618-551-2755 >>> > Email: lorentedford(a)gmail.com >>> > Email: KC9ZHV(a)KC9ZHV.com >>> > http://www.lorentedford.com >>> > http://www.kc9zhv.com >>> > http://forum.kc9zhv.com >>> > http://hub.kc9zhv.com >>> > http://Ltcraft.net >>> > http://voipham.com >>> > >>> > On Tue, Jul 11, 2017 at 7:19 AM, Jeremy Utley <jerutley(a)gmail.com> wrote: >>> >> >>> >> Nope, Crompton’s site is “hamvoip.com”. voipham.com is Loren Tedford’s >>> >> site, as he confirmed on list a couple days ago. >>> >> >>> >> >>> >> >>> >> Back to work… >>> >> >>> >> >>> >> >>> >> Jeremy, NQ0M >>> >> >>> >> >>> >> >>> >> From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] >>> >> On Behalf Of ARS W5OMR >>> >> Sent: Tuesday, July 11, 2017 6:34 AM >>> >> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> >>> >> Subject: Re: [App_rpt-users] DIAL Download site (dvswitch.org) offline >>> >> >>> >> >>> >> >>> >> voipham.com is Cromptons site, sorry to say... >>> >> >>> >> >>> >> >>> >> On Jul 8, 2017 18:56, "Jeremy Utley" <jerutley(a)gmail.com> wrote: >>> >> >>> >> Anyone know why dvswitch.org (the official download site for Dial images) >>> >> is offline? I was trying to download RAT_RC1 from there last night, and was >>> >> unsuccessful. Thanks to some Google searching, I found a copy of it >>> >> available from Loren Tedford’s site voipham.com (at least I think that’s >>> >> Loren’s site), so I could get my Pi node reinstalled. >>> >> >>> >> >>> >> >>> >> Jeremy, NQ0M >>> >> >>> >> >>> >> _______________________________________________ >>> >> App_rpt-users mailing list >>> >> App_rpt-users(a)lists.allstarlink.org >>> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >> >>> >> To unsubscribe from this list please visit >>> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> >> scroll down to the bottom of the page. Enter your email address and press >>> >> the "Unsubscribe or edit options button" >>> >> You do not need a password to unsubscribe, you can do it via email >>> >> confirmation. If you have trouble unsubscribing, please send a message to >>> >> the list detailing the problem. >>> >> >>> >> >>> >> _______________________________________________ >>> >> App_rpt-users mailing list >>> >> App_rpt-users(a)lists.allstarlink.org >>> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >> >>> >> To unsubscribe from this list please visit >>> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> >> scroll down to the bottom of the page. Enter your email address and press >>> >> the "Unsubscribe or edit options button" >>> >> You do not need a password to unsubscribe, you can do it via email >>> >> confirmation. If you have trouble unsubscribing, please send a message to >>> >> the list detailing the problem. >>> > >>> > >>> > >>> > _______________________________________________ >>> > App_rpt-users mailing list >>> > App_rpt-users(a)lists.allstarlink.org >>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> > >>> > To unsubscribe from this list please visit >>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> > scroll down to the bottom of the page. Enter your email address and press >>> > the "Unsubscribe or edit options button" >>> > You do not need a password to unsubscribe, you can do it via email >>> > confirmation. If you have trouble unsubscribing, please send a message to >>> > the list detailing the problem. >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0