July 2017 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Micro-Node RTCM
by Mark Guibord 18 Oct '17

18 Oct '17

The RTCM uses a 16 bit DSP with a tightly integrated interrupt driven firmware package written in c http://www.microchip.com/wwwproducts/en/dsPIC33FJ128GP804 If you're interested here is a link to the open-source software for the RTCM.. http://svn.ohnosec.org/viewvc/projects/allstar/voter/board-firmware/?root=s… From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Doug Kingston Sent: Tuesday, April 25, 2017 9:41 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Micro-Node RTCM I know that I would have a GPS with 1pps feed to get the timing. Once you have that, what is different in an RTCM other than nice packaging? What is the core processor technology inside the RTCM. I am assuming is some form of ARM processor. Can you can you get a root shell and use SSH to access? -Doug- On Tue, Apr 25, 2017 at 7:50 PM, Fredric Moses <fred(a)moses.bz> wrote: You seem confused… you still need a linux system running app_rpt with the RTCM’s… think of the RTCM as an ethernet based radio interface vs usb.. But that radio interface when you add GPS to each one can do voting with others.. and with some more work simulcast transmitting… We have some 50-60 RTCM’s deployed and love them… Getting ready to rebuild another clubs VHF repeater voter system with a 6 site RTCM based voting system. I just started testing the new hamvoip rPi3 image with some rtcm’s myself... -- Fredric Moses - W8FSM - WQOG498 fred(a)moses.bz > On Apr 25, 2017, at 22:32, Doug Kingston <dpk(a)randomnotes.org> wrote: > > I am considering using these for a amateur repeater voting application. The alternative would be to roll my own with a Raspberry Pi 3 and probably the HamVOIP.org distribution. Who out there is using the RTCM? I can find very little information beyond the manual and I am concerned that the software may not be maintained and that there is not enough access to the underlying Linux system. > > Who can tell me more about the RTCM? > > Has anyone rolled their own with a Pi3? Any advice there? > > -Doug- > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

5 5

USB Battery Bank that supports 'Pass Through Charging' and acts as a UPS for Allstar Nodes running on a Pi
by Ramesh Dhami 09 Aug '17

09 Aug '17

Hi Folks: Wonder if anyone has a lead on a USB Battery Bank that supports pass-through charging and does NOT interrupt the output voltage when there is loss of commercial power? I'd like to use a battery bank on my remote node down in FL (renowned for electrical storms!), so keeping the Pi up during brown-outs and loss of commercial power is a big plus. In case folks are interested - here is a link to a good article providing a review of various products: http://www.theoutpost.org/6-techy/raspberry-pi-usb-power-bank-ups-pass-thro… Unfortunately, the leading contender, the product from RS Electronics (brings back memories of my "jollies" as an Apprentice heading up to Alum Rock in Birmingham ;) is not available in N. America. There must be other equivalents out there..... Anyone have a lead on such a product? Thanks! Ramesh, VA3UV

12 17

Output CTCSS Follow Input?
by Brett Friermood 04 Aug '17

04 Aug '17

I seem to recall discussion of a setting that transmits CTCSS only when local repeater input or linked audio is being transmitted, and does not for ID, courtesy tone, etc. I've looked through the archives but have not found anything. I may just be confusing it with features of some other controllers. The reason I ask is a recent discussion on the other list ended with the answer of being unable to do it since there is not any code in all of asterisk/app_rpt to handle it. Thanks, Brett KQ9N

4 5

AllStarLink website
by David Shaw 30 Jul '17

30 Jul '17

Hello Everyone, Quick question. I'm not able to edit / access my node settings on the website. All I have is "Home" "WebTransceiver" "Network" "Account Settings". Do I need to do something to get back access to my nodes? -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

2 2

Got a strange error in my AT&T gateway
by George Csahanin 30 Jul '17

30 Jul '17

Hi all. I've been seeing a daily reboot of my AT&T gateway, has done it three times now. Looked at the logs in the AT&T box and I see several: host=stats.allstarlink.org url=/uhandler.php hijacked Anybody know what this might mean? GeorgeC -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel http://dyb.com PLEASE NOTE: Effective January 1, 2018 george(a)dyb.com will no longer function USE george(a)w2db.com

5 9

Re: [App_rpt-users] Got a strange error in my AT&T gateway
by ars.w5omr＠gmail.com 30 Jul '17

30 Jul '17

Steve Gibson, the guy that gave us SpinRite back in the DOS days, has a much better port scanner. I wanna say his site is Gibson research Inc, or, GRC dot com, but research would help. On Jul 29, 2017 7:29 PM, David Shaw <shawpbx(a)gmail.com> wrote: > > I saw your post from the att forum dated back in Sept 2016. So your router detected a php hijacking and blocked the packet. That's ok. But.. I would guess your getting attacked all around and over loading your router. If you have a consumer-grade router. I would call att and see if they have anyway of looking to see if your being attacked. Getting a new IP address should help. Login to your router check to see what your WAN/Public IP address. > > > Try powering off your Router and ASL Node for 3-5 minutes. > > Some hackers testing your IP address and router. > > The power off is to hopefully get a new IP address. > > Google online port scanner. Find one a scan your router to see if any of your ports our open. It should show no port. Filtered ports are bad as well. > > David KE6UPI > > PS: If your into playing with routers and making your own. Try OPNsense. > https://opnsense.org/ > > I use Sophos with a free home lic. > > > > -- > Thanks, David > > "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." > Thomas Jefferson > > On Sat, Jul 29, 2017 at 10:29 AM, George Csahanin <george(a)dyb.com> wrote: >> >> Hi all. I've been seeing a daily reboot of my AT&T gateway, has done it three times now. Looked at the logs in the AT&T box and I see several: >> >> host=stats.allstarlink.org url=/uhandler.php hijacked >> >> Anybody know what this might mean? >> >> GeorgeC >> >> >> -- >> George Csahanin >> 10100 Carson Ranch Rd. >> Crowley, TX 76036 >> 682-708-5716 home >> 401-338-0568 cel >> http://dyb.com >> PLEASE NOTE: Effective January 1, 2018 george(a)dyb.com will no longer function >> USE george(a)w2db.com >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > >

1 0

Release of AutoSkyWarn 5
by Steve Mahler 29 Jul '17

29 Jul '17

AutoSkyWarn Version 5M is now ready for release. Available at http://kizzy03.wixsite.com/kf5vh/auto-skywarn AutoSkyWarn (ASW) is designed to couple SkyWarn Operations with AllStar Servers / Nodes. ASW is a program / shell script (developed to run on the AllStar DIAL distribution for PCs) allowing an AllStar Server and Node to automatically report and announce about 50 National Weather Service (NWS) Warnings, Watches, Advisories and Statements as they occur. You can access the Overview and ReadMe1st first documents at http://kizzy03.wixsite.com/kf5vh/auto-skywarn and also on that site you can hear 3 sounds clips of messages produced by ASW. This release is for someone that has worked with UNIX/Linux systems as superuser. There are installation notes, but no step by step installation guide. (There is an effort to integrate ASW into the DIAL add-on/upgraded system.) The software requires Festival and SOX to operate. I will be releasing copies of ASW (as a tarball) by email until a direct download is available. So after reviewing the Overview and ReadMe1st if you are interested in AutoSkyWarn please send me an email at KF5VH(a)louisiana.edu and please include: - Your Name - Your CallSign - Your Location - a URL pointer to your repeater/group website - any other interesting information ...STeve - KF5VH

1 0

Audio ' Clicking '
by lengriff＠optimum.net 29 Jul '17

29 Jul '17

At ETSNJ, we run 2 repeaters off a Raspberry Pi. After a few days, the audio begins to suffer brief interruptions with a clicking type sound. It progressively gets worse until it is chopping up the actual conversation. I can clear it by re-booting the Pi, but it returns after a time. I've looked at the running processes, and do not see anything abnormal that would chew up processor resources. Anyone have thoughts on what this might be?

2 1

2 nodes on a laptop running DIAL
by N6GKJ Land 28 Jul '17

28 Jul '17

Hi guys, I know this has been asked before and I can't seem recall when... I have 2 DMK URI's on my laptop running DIAL. My problem is that every time I power cycle the laptop, the URI's get readdressed and the node *usbxxxxx.conf files have to be changed to reflect the new buss assignments. How do we get around this? I'm not sure at this point if it is a DIAL issue or a hardware issue with the laptop. I have seen this before on another platform, just can't seem recall what I did to fix it. Changing the platform is not an option in this case, I have a project in process that requires a laptop running DIAL with GUI installed. My system is working great with the exception of the USB assignments Ron, N6GKJ

4 4

SimpleUSB_Tune_Menu
by Luc Drolet VE2 LUQ 27 Jul '17

27 Jul '17

Hello everyone, With an RPi, can you tell me how we can do to adjust the audio with a monitor service, With PuTTY, I can see, "12 - Run simpleusb_tune_Menu Apllication" And then, yes, I saw "2 RX VOICE Level Set" but I do not know how to change my value and also save it Is there a step-by-step procedure for AllStar Link, RX VOICE TX VOICE thank you very much and Have a Nice day Luc 73

4 5