- App_rpt-users - lists.keekles.org

DIAL Install Hangs
by Darren Carleton 09 Oct '15

09 Oct '15

First I would like to say I do like the way this installs much more quickly and was an easy boot from a UBS Flash. I have an Intel DN2800MTE motherboard. It requires me to add parms on boot: video=LVDS-1:d video=eDP-1:d This allow for my external VGA monitor to display. So far... So good... Next the basic packages get installed and the system shuts down. Upon startup, some packages are add/removed and then the system hangs. What I found was that my network router supports IP v6. I don't have it specifically configured. The end result is that the DNS name servers are not set so that the steps in rc.local can find the hosts. In order to work around the issue I added the following: video=LVDS-1:d video=eDP-1:d ipv6.disable=1 This causes IP v6 not to be started. IP v4 took over (DHCP) and obtained the correct settings and updated /etc/resolve.conf correctly. I hope this helps others and adds value for future documentation. Thanks & 73's Darren KJ6KFB

1 0

Re: [App_rpt-users] Compatible Small(er) Profile Computer for Use with Quad PCI Card
by Leon Zetekoff 08 Oct '15

08 Oct '15

I'm happy with the Foxconn. I got it since ward Mundy recommended it and was known to work with Piaf or incredible pbx. Sent from my Sprint Phone. ----- Reply message ----- From: "Stacy" <kg7qin(a)arrl.net> To: "John" <wb5nfc(a)gmail.com>, "App_rpt-users(a)ohnosec.org" <App_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Compatible Small(er) Profile Computer for Use with Quad PCI Card Date: Thu, Oct 8, 2015 9:14 PM There are some interesting things at mini-box.com, and you can get the motherboards by themselves -- but you might be able to find them cheaper. On 10/08/2015 06:03 PM, Leon Zetekoff wrote: Look at the Foxconn boxes. they are no mechanical parts (SSD instead of HD). GOt one for our pbx at our synagogue and works great. it's a 4 cpu 1.8 ghz and i think has 4 gb ram and I think they also run on 12volts. Ward Mundy recommended them too and price was right. Of course the BBB and pi derivatives are good choices too. 73 leon On 10/8/2015 8:34 PM, Steve Zingman wrote: John, I'm running a quad card on a NeoWare CA22 see: <http://www.parkytowers.me.uk/thin/neoware/CA22/> I changed out the DOM for a 4G. I'm running DIAL on it. If you can't find one let me know. 73, Steve N4IRS On 10/08/2015 08:24 PM, John wrote: I've been playing with the BeagleBoards and PI computers for a while but I think it's time for me to resurrect my original Quad PCI Card system with a smaller and newer computer. Obviously, the PCI card requirement is a must.... as is not breaking the bank, reasonable size footprint, and relatively low power consumption. Anyone else still running a Quad-Card system? If so, what are some recommended eBay or bargain-basement computers? John / WB5NFC _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Compatible Small(er) Profile Computer for Use with Quad PCI Card
by John 08 Oct '15

08 Oct '15

I've been playing with the BeagleBoards and PI computers for a while but I think it's time for me to resurrect my original Quad PCI Card system with a smaller and newer computer. Obviously, the PCI card requirement is a must.... as is not breaking the bank, reasonable size footprint, and relatively low power consumption. Anyone else still running a Quad-Card system? If so, what are some recommended eBay or bargain-basement computers? John / WB5NFC

4 4

Jackson Labs GPS Device and RTCM
by Frederick Bray 08 Oct '15

08 Oct '15

I am thinking of acquiring a couple of the Jackson Labs M12M replacement receivers to use with my RTCM units. It appears that they might greatly simplify the process obtaining a GPS derived 1 PPS signal, especially for temporary / portable repeaters that require voting receivers. They are currently available for under $200 per unit, shipped. http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_Specsheet.… http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_UserManual… These were designed as a retrofit for a specific earlier GPS receiver but they appear to be potentially useful to supply at least the 1 PPS signal required by the RTCM. They might also act as a frequency standard for simulcast, although they may not have the oscillator required to provide a stable frequency source in the event of loss of GPS signal. Does it appear that these units would work? Has anyone experimented with this or similar units with the RTCM? Thanks. KE6CD

4 3

Re: [App_rpt-users] New Official Allstar Distribution Released (DIAL)
by Leon Zetekoff 08 Oct '15

08 Oct '15

Personally I think there should be a physical firewall appliance. It could be as simple as pfsense. The appliance should be in front of anything you want protected. You can get old watchguard hardware for like $50 and put mikrotik routeros on it for additional $45 or pfsense for free. The X700 or X1000 are easiest. The e series is doable as is the Xtm5 series. I've got a pile of X700s. They are celeron 1200 mhz with 256mb ram and six 10/100 Ethernet ports. Uses cf flash. Also has ide interface. I have two running routeros and friends have pfsense on it and on the Xtms Let asterisk do it's thing let other things Di security and other functions. If interested Hit me off list please. 73 Leon wa4zlw Sent from my Sprint Phone. ----- Reply message ----- From: "Steve Zingman" <szingman(a)msgstor.com> To: "Stacy" <kg7qin(a)arrl.net>, "Steven Donegan" <donegan(a)donegan.org>, "David Andrzejewski" <david(a)davidandrzejewski.com> Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] New Official Allstar Distribution Released (DIAL) Date: Thu, Oct 8, 2015 6:40 PM Stacy, You are correct. As pretty much everyone that has weighed in. DIAL sets up a node so it can be configured by most users either using Linux tools or tools on other systems (WinSCP) Before a node is deployed it should be locked down. This is a given. Right now my plate is full getting versions for other processors. So I'm going to ask the security people in the group to create a lock down or deploy script. Take the existing DIAL deployment and lock it down. I'll take your work make sure it fits with the x86 DIAL and the other processors. I suggest you use the list so others can participate. 73, Steve N4IRS On 10/08/2015 06:31 PM, Stacy wrote: https://www.sans.org/critical-security-controls Follow the link above for a good place to start at securing your systems/networks. #12 is relevant in this case. :) -Stacy KG7QIN On 10/05/2015 04:15 PM, Steven Donegan wrote: Let me spin up one of the DIAL setups - may take me a day - then see what is enabled by default and hardening will be 'easy' (no processes/ports active not absolutely required). Adding the CA stuff will be easy as well if desired. Whatever the overall direction is I can do security stuff :-) Steven Donegan KK6IVC General Class FCC License Silver State Car #86 www.sscc.us From: Steve Zingman <szingman(a)msgstor.com> To: Steven Donegan <donegan(a)donegan.org>; David Andrzejewski <david(a)davidandrzejewski.com> Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Sent: Monday, October 5, 2015 4:04 PM Subject: Re: [App_rpt-users] New Official Allstar Distribution Released (DIAL) Sure, I think a hardening script might be in order (and optional). On 10/05/2015 06:55 PM, Steven Donegan wrote: BTW - I have a script to make a *NIX box a CA and generate certificates - that could easily be added to the DIAL/Pi/etc releases - let me see if I can scrounge it up :-) Assuming anyone would want that ability and Steve is OK with it :-) Steven Donegan KK6IVC General Class FCC License Silver State Car #86 www.sscc.us From: David Andrzejewski <david(a)davidandrzejewski.com> To: Steven Donegan <donegan(a)donegan.org> Cc: Bryan D. Boyle <bdboyle(a)bdboyle.com>; "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Sent: Monday, October 5, 2015 3:50 PM Subject: Re: [App_rpt-users] New Official Allstar Distribution Released (DIAL) Yep - disallowing keyboard-interactive and accepting only certificates. I turn off PermitRootLogin and only allow certificates. Barring some kind of exploit in sshd, that ought to be secure enough. Steven Donegan wrote: Using certificates for ssh is yet another method :-) Steven Donegan KK6IVC General Class FCC License Silver State Car #86 www.sscc.us From: Bryan D. Boyle <bdboyle(a)bdboyle.com> To: Steven Donegan <donegan(a)donegan.org> Cc: Steve Zingman <szingman(a)msgstor.com>; "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Sent: Monday, October 5, 2015 2:49 PM Subject: Re: [App_rpt-users] New Official Allstar Distribution Released (DIAL) Using a jump box as you describe is one way...not allowing SSH from the outside adds a layer; setting up a secue VDI capability to the jumpbox over a vpn is yet a third way...;). my rule: if it's exposed to the net, it's potentially vulnerable. Just turn on your SIP port and pop some popcorn to see...;) -- Bryan Sent from my iPhone 5...No electrons were harmed in the sending of this message. On Oct 5, 2015, at 17:39, Steven Donegan <donegan(a)donegan.org> wrote: Direct root login being disallowed IF there were no other way to get full root privileges (not the case here) was considered best practice. However in almost every case there is a user (on Raspbian user pi) that can simply login, sudo -s and do whatever they want. Yes it puts up a small hurdle but I don't see it as a serious one. In short, there is almost no setup that will allow you to completely lock out root with the exception of a few well designed appliances. And that means someone is out there doing support to get things resolved. This system is not of that flavor and root is necessary for many things so frankly adding a hurdle or two really doesn't appreciably make the system more secure. Require a long pass phrase (say 20 mixed characters or so) and this whole thing is moot... And BTW - putting sshd on port 222 (or anything except 22) is security by obscurity - many tools can find standard protocols on non-standard ports :-) (I know, I wrote one) The best bet is to not allow ssh at all. If that is not feasible then do the su or sudo thing and/or set up an intermediate system such that you access a non-privileged account on system A, then ssh to system B and system B will ONLY accept ssh from system A. Still can be beaten but it is a bit harder... And BTW - I have done infosec for about 20 years so I am allowed to have an opinion on this topic :-) Steven Donegan KK6IVC General Class FCC License Silver State Car #86 www.sscc.us From: Steve Zingman <szingman(a)msgstor.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Sent: Monday, October 5, 2015 2:24 PM Subject: [App_rpt-users] New Official Allstar Distribution Released (DIAL) Dave, Let's say I agree with you. And I well may. On most internet exposed machines, I don't even allow ssh unless I trust your address or require a VPN. I agree is common practice to not allow it. Now the question is why? As John McLaughlin would say, DISCUSS! On 10/05/2015 08:40 AM, Steve Zingman wrote: > root login via SSH is now allowed > This is a bad idea. Root should *never* be allowed to login to a system > remotely. It's better to log in as a normal user and then become root > via su, sudo, etc. > - Dave -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

New Official Allstar Distribution Released
by Jim Duuuude 08 Oct '15

08 Oct '15

A new official Allstar Link Distribution is now available. It is called "DIAL" (Debian Install (for) Allstar Link). It is based on 'Debian Jessie', and supports a number of modern motherboards and other hardware configurations, of which the "Old Standard" (ACID) distro sadly fell short. It runs a VERY modern 3.X Linux kernel and DAHDI (as opposed to Zaptel, as was in the ACID distro). The ISO (installation) image may be downloaded at: http://dl.allstarlink.org/dial/dial-allstar-netinstall.iso Download the image, "burn" it to a CD or USB stick, install it, let it do its "installation stuff" (it reboots once or twice), and then, finally log in as 'root' with the password 'debian'. You will be taken through a script with a few questions, and then it will be ready to use. This is a result of a great deal of diligent work by Steve Zingman, N4IRS and Mike Zingman, N4IRR, without whom this would have not been possible. Please express your gratitude to them for making this possible. Jim, WB6NIL

19 45

Re: [App_rpt-users] DIAL with Broadcastify etc via ezstream
by Steve Zingman 08 Oct '15

08 Oct '15

Posted to: <https://github.com/N4IRS/AllStar/tree/master/doc> 73, Steve N4IRS On 10/08/2015 01:42 PM, Mark Johnston wrote: > Not sure if you saw my post about that a while back, using ACID it was > just much easier to install now, had to use a really old version of > ezstream before with the acid setup. > Now it works from the normal install that is available. > > > apt-get install ezstream lame > > I enabled this: load => app_chanspy.so ; Listen to the audio > of an active channel > not sure if that mattered though, seemed like it would be important... > > add this below the first section of the rpt.conf for the node you want > to broadcast. > > outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 > --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml > > ;ezstream1001.xml > > <ezstream> > > <url>http://audio3.broadcastify.com:80/mountpoint-provided-by-broadcastify</url> > > <sourcepassword>feed-specific-password-not-same-as-website-login</sourcepassword> > > <format>MP3</format> > > <filename>stdin</filename> > > <stream_once>1</stream_once> > > <reconnect_tries>0</reconnect_tries> > > <svrinfoname>Description</svrinfoname> > > <svrinfourl>http://www.radioreference.com/</svrinfourl> > > <svrinfogenre>Amateur Radio</svrinfogenre> > > <svrinfodescription>Description</svrinfodescription> > > <svrinfobitrate>16</svrinfobitrate> > > <svrinfochannels>1</svrinfochannels> > > <svrinfosamplerate>22050</svrinfosamplerate> > > <svrinfopublic>1</svrinfopublic> > > </ezstream> > > > > > > > "Got Root?" > > How many software engineers does it take to change a light bulb? > *None. It's a hardware problem.* > > > Unix is user friendly. It's just very particular about who it's > friends are. > WINDOWS: Will Install Needless Data On Whole System > MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools > Teenagers. > > > A ntennas > P oorly > P laced > L acks > E ngineering > > The best way to accelerate a computer running Windows is at 9.81 m/s². > > /*_/"I get paid to support Windows, I use Linux to get work done."/_*/ > > > On Thu, Oct 8, 2015 at 10:33 AM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > Good to hear. > It might be worth documenting what needs to be installed and any > tweaks that need to be done. > > 73, Steve N4IRS > > On 10/08/2015 01:30 PM, Mark Johnston wrote: >> it's streaming, I even did a reboot and it's live now - not sure >> what the problem was, maybe something on their end... >> >> http://www.broadcastify.com/listen/feed/21348/web >> >> "Got Root?" >> >> How many software engineers does it take to change a light bulb? >> *None. It's a hardware problem.* >> >> >> Unix is user friendly. It's just very particular about who it's >> friends are. >> WINDOWS: Will Install Needless Data On Whole System >> MICROSOFT: Most Intelligent Customers Realize Our Software Only >> Fools Teenagers. >> >> >> A ntennas >> P oorly >> P laced >> L acks >> E ngineering >> >> The best way to accelerate a computer running Windows is at 9.81 >> m/s². >> >> /*_/"I get paid to support Windows, I use Linux to get work >> done."/_*/ >> >> >> On Thu, Oct 8, 2015 at 10:20 AM, Steve Zingman >> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >> >> Working as in streaming from the node or sending a audio file? >> >> >> On 10/08/2015 01:19 PM, Mark Johnston wrote: >>> it gave me a login error >>> >>> ezstream: Connection to >>> http://audio3.broadcastify.com:80/wcms5pn74trz failed: Login >>> failed >>> >>> ezstream: Exiting ... >>> >>> >>> suddenly started working - not sure how/why though - >>> >>> >>> >>> "Got Root?" >>> >>> How many software engineers does it take to change a light bulb? >>> *None. It's a hardware problem.* >>> >>> >>> Unix is user friendly. It's just very particular about who >>> it's friends are. >>> WINDOWS: Will Install Needless Data On Whole System >>> MICROSOFT: Most Intelligent Customers Realize Our Software >>> Only Fools Teenagers. >>> >>> >>> A ntennas >>> P oorly >>> P laced >>> L acks >>> E ngineering >>> >>> The best way to accelerate a computer running Windows is at >>> 9.81 m/s². >>> >>> /*_/"I get paid to support Windows, I use Linux to get work >>> done."/_*/ >>> >>> >>> On Thu, Oct 8, 2015 at 10:06 AM, Steve Zingman >>> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >>> >>> can you send a audio file to broadcastify with the >>> command line below? >>> >>> >>> On 10/08/2015 01:00 PM, Mark Johnston wrote: >>>> >>>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 >>>> -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc >>>> /etc/ezstream1001.xml >>>> >>>> >>>> This just started appearing >>>> >>>> >>>> [Oct 8 09:35:48] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:50] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:52] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:54] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:56] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:58] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> >>>> "Got Root?" >>>> >>>> How many software engineers does it take to change a >>>> light bulb? >>>> *None. It's a hardware problem.* >>>> >>>> >>>> Unix is user friendly. It's just very particular about >>>> who it's friends are. >>>> WINDOWS: Will Install Needless Data On Whole System >>>> MICROSOFT: Most Intelligent Customers Realize Our >>>> Software Only Fools Teenagers. >>>> >>>> >>>> A ntennas >>>> P oorly >>>> P laced >>>> L acks >>>> E ngineering >>>> >>>> The best way to accelerate a computer running Windows >>>> is at 9.81 m/s². >>>> >>>> /*_/"I get paid to support Windows, I use Linux to get >>>> work done."/_*/ >>>> >>>> >>>> On Thu, Oct 8, 2015 at 9:55 AM, Steve Zingman >>>> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >>>> >>>> Mark, >>>> Your log is showing problems with sip and possibly >>>> a sound fob. >>>> I don't think you need app_ices >>>> >>>> Please post you outstreamcmd in rpt.conf >>>> >>>> you may want to disable the sip changes while >>>> troubleshooting streaming. >>>> >>>> 73, Steve N4IRS >>>> >>>> >>>> >>>> On 10/08/2015 12:13 PM, Mark Johnston wrote: >>>>> Anyone try setting this up yet? >>>>> Used to use this with ACID just fine >>>>> Installed ezstream, and Lame - >>>>> >>>>> >>>>> shows it's running >>>>> >>>>> 1124 ? S 0:00 /bin/sh -c /usr/bin/lame >>>>> --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | >>>>> /usr/bin/ezstream -qvc /etc/ezstream1001.xml >>>>> >>>>> >>>>> I enabled this module, thinking thats what it needed >>>>> >>>>> load => app_ices.so ; Encode and Stream via >>>>> icecast and ices >>>>> >>>>> >>>>> >>>>> ;modules.conf >>>>> >>>>> autoload=no >>>>> >>>>> >>>>> ; Applications >>>>> >>>>> >>>>> noload => app_adsiprog.so ;Asterisk ADSI >>>>> Programming Application >>>>> >>>>> noload => app_alarmreceiver.so ;Alarm Receiver for >>>>> Asterisk >>>>> >>>>> noload => app_amd.so ;Answering Machine Detection >>>>> Application >>>>> >>>>> load => app_authenticate.so ; Authentication >>>>> Application >>>>> >>>>> noload => app_cdr.so ;Tell Asterisk to not >>>>> maintain a CDR for >>>>> >>>>> noload => app_chanisavail.so ;Check channel >>>>> availability >>>>> >>>>> noload => app_channelredirect.so ;Channel Redirect >>>>> >>>>> load => app_chanspy.so ;Listen to the audio of an >>>>> active channel >>>>> >>>>> noload => app_controlplayback.so ;Control Playback >>>>> Application >>>>> >>>>> noload => app_dahdibarge.so ;Barge in on channel >>>>> application >>>>> >>>>> noload => app_dahdiras.so ;DAHDI RAS Application >>>>> >>>>> noload => app_dahdiscan.so ;Scan Zap channels >>>>> application >>>>> >>>>> noload => app_db.so ;Database Access Functions >>>>> >>>>> load => app_dial.so ;Dialing Application >>>>> >>>>> noload => app_dictate.so ;Virtual Dictation Machine >>>>> >>>>> noload => app_directed_pickup.so ;Directed Call >>>>> Pickup Application >>>>> >>>>> noload => app_directory.so ;Extension Directory >>>>> >>>>> noload => app_disa.so ;DISA (Direct Inward System >>>>> Access) Appli >>>>> >>>>> noload => app_dumpchan.so ;Dump Info About The >>>>> Calling Channel >>>>> >>>>> noload => app_echo.so ;Simple Echo Application >>>>> >>>>> load => app_exec.so ;Executes dialplan applications >>>>> >>>>> noload => app_externalivr.so ;External IVR >>>>> Interface Application >>>>> >>>>> noload => app_festival.so ;Simple Festival Interface >>>>> >>>>> noload => app_flash.so ;Flash channel application >>>>> >>>>> noload => app_followme.so ;Find-Me/Follow-Me >>>>> Application >>>>> >>>>> noload => app_forkcdr.so ;Fork The CDR into 2 >>>>> separate entities >>>>> >>>>> noload => app_getcpeid.so ;Get ADSI CPE ID >>>>> >>>>> noload => app_gps.so ;GPS interface module >>>>> >>>>> noload => app_hasnewvoicemail.so ;Indicator for >>>>> whether a voice mailbox ha >>>>> >>>>> load => app_ices.so ;Encode and Stream via icecast >>>>> and ices >>>>> >>>>> noload => app_image.so ;Image Transmission >>>>> Application >>>>> >>>>> noload => app_lookupblacklist.so ;Look up >>>>> Caller*ID name/number from black >>>>> >>>>> noload => app_lookupcidname.so ;Look up CallerID >>>>> Name from local databas >>>>> >>>>> load => app_macro.so ;Extension Macros >>>>> >>>>> noload => app_meetme.so ;MeetMe conference bridge >>>>> >>>>> noload => app_milliwatt.so ;Digital Milliwatt >>>>> (mu-law) Test Applicat >>>>> >>>>> noload => app_mixmonitor.so ;Mixed Audio >>>>> Monitoring Application >>>>> >>>>> noload => app_morsecode.so ;Morse code >>>>> >>>>> noload => app_mp3.so ;Silly MP3 Application >>>>> >>>>> noload => app_nbscat.so ;Silly NBS Stream Application >>>>> >>>>> noload => app_page.so ;Page Multiple Phones >>>>> >>>>> noload => app_parkandannounce.so ;Call Parking and >>>>> Announce Application >>>>> >>>>> load => app_playback.so ;Sound File Playback >>>>> Application >>>>> >>>>> noload => app_privacy.so ;Require phone number to >>>>> be entered, if n >>>>> >>>>> noload => app_queue.so ;True Call Queueing >>>>> >>>>> noload => app_radbridge.so ;Radio Bridging >>>>> interface module >>>>> >>>>> noload => app_random.so ;Random goto >>>>> >>>>> noload => app_readfile.so ;Stores output of file >>>>> into a variable >>>>> >>>>> noload => app_read.so ;Read Variable Application >>>>> >>>>> noload => app_realtime.so ;Realtime Data >>>>> Lookup/Rewrite >>>>> >>>>> noload => app_record.so ;Trivial Record Application >>>>> >>>>> load => app_rpt.so ;Radio Repeater/Remote Base >>>>> Application >>>>> >>>>> noload => app_sayunixtime.so ;Say time >>>>> >>>>> load => app_senddtmf.so ;Send DTMF digits Application >>>>> >>>>> noload => app_sendtext.so ;Send Text Applications >>>>> >>>>> noload => app_setcallerid.so ;Set CallerID >>>>> Application >>>>> >>>>> noload => app_setcdruserfield.so ;CDR user field apps >>>>> >>>>> noload => app_settransfercapability.so ;Set ISDN >>>>> Transfer Capability >>>>> >>>>> noload => app_sms.so ;SMS/PSTN handler >>>>> >>>>> noload => app_softhangup.so ;Hangs up the >>>>> requested channel >>>>> >>>>> noload => app_speech_utils.so ;Dialplan Speech >>>>> Applications >>>>> >>>>> noload => app_stack.so ;Stack Routines >>>>> >>>>> load => app_system.so ;Generic System() application >>>>> >>>>> noload => app_talkdetect.so ;Playback with Talk >>>>> Detection >>>>> >>>>> noload => app_test.so ;Interface Test Application >>>>> >>>>> load => app_transfer.so ;Transfer >>>>> >>>>> noload => app_url.so ;Send URL Applications >>>>> >>>>> noload => app_userevent.so ;Custom User Event >>>>> Application >>>>> >>>>> noload => app_verbose.so ;Send verbose output >>>>> >>>>> noload => app_voicemail.so ;Comedian Mail >>>>> (Voicemail System) >>>>> >>>>> noload => app_waitforring.so ;Waits until first >>>>> ring after time >>>>> >>>>> noload => app_waitforsilence.so ;Wait For Silence >>>>> >>>>> noload => app_while.so ;While Loops and >>>>> Conditional Execution >>>>> >>>>> noload => app_zapateller.so ;Block Telemarketers >>>>> with Special Informa >>>>> >>>>> >>>>> ; CDR >>>>> >>>>> >>>>> noload => cdr_csv.so ;Comma Separated Values CDR >>>>> Backend >>>>> >>>>> noload => cdr_custom.so ;Customizable Comma >>>>> Separated Values CDR >>>>> >>>>> noload => cdr_manager.so ;Asterisk Manager >>>>> Interface CDR Backend >>>>> >>>>> >>>>> ; Channels >>>>> >>>>> >>>>> noload => chan_agent.so ;Agent Proxy Channel >>>>> >>>>> noload => chan_alsa.so ;ALSA Console Channel Driver >>>>> >>>>> noload => chan_beagle.so ;Beagleboard Radio >>>>> Interface Channel Driver >>>>> >>>>> load => chan_dahdi.so ;DAHDI Telephony >>>>> >>>>> noload => chan_echolink.so ;echolink channel driver >>>>> >>>>> noload => chan_features.so ;Feature Proxy Channel >>>>> >>>>> noload => chan_gtalk.so ;Gtalk Channel Driver >>>>> >>>>> load => chan_iax2.so ;Inter Asterisk eXchange (Ver 2) >>>>> >>>>> load => chan_local.so ;Local Proxy Channel (Note: >>>>> used internal >>>>> >>>>> noload => chan_oss.so ; >>>>> >>>>> noload => chan_phone.so ; >>>>> >>>>> load => chan_simpleusb.so ;Simple USB Radio >>>>> Interface Channel Drive >>>>> >>>>> load => chan_sip.so ;Session Initiation Protocol >>>>> (SIP) >>>>> >>>>> noload => chan_tlb.so ;TheLinkBox channel driver >>>>> >>>>> load => chan_usbradio.so ;USB Console Channel Driver >>>>> >>>>> noload => chan_usrp.so ;USRP Channel Module >>>>> >>>>> noload => chan_voter.so ;radio Voter channel driver >>>>> >>>>> >>>>> ; Codecs >>>>> >>>>> >>>>> ; CODEC AUDIO QUALITY BANDWIDTH (including IP >>>>> and Ethernet headers) >>>>> >>>>> ; ULAW best 87 kilobits per second (kbps) >>>>> >>>>> ; ADPCM good 55 kbps >>>>> >>>>> ; GSM mediocre 36 kbps >>>>> >>>>> ; g726aal2 >>>>> >>>>> ; ilbc >>>>> >>>>> >>>>> load => codec_adpcm.so ;Adaptive Differential PCM >>>>> Coder/Decoder >>>>> >>>>> load => codec_alaw.so ;A-law Coder/Decoder >>>>> >>>>> load => codec_a_mu.so ;A-law and Mulaw direct >>>>> Coder/Decoder >>>>> >>>>> noload => codec_dahdi.so ;Generic DAHDI Transcoder >>>>> Codec Translato >>>>> >>>>> load => codec_g726.so ;ITU G.726-32kbps G726 >>>>> Transcoder >>>>> >>>>> load => codec_gsm.so ;GSM Coder/Decoder >>>>> >>>>> load => codec_ulaw.so ;mu-Law Coder/Decoder >>>>> >>>>> noload => codec_ilbc.so >>>>> ;http://en.wikipedia.org/wiki/Internet_Low_Bitrate_Codec >>>>> >>>>> >>>>> ; Formats >>>>> >>>>> >>>>> load => format_g723.so ;G.723.1 Simple Timestamp >>>>> File Format >>>>> >>>>> load => format_g726.so ;Raw G.726 >>>>> (16/24/32/40kbps) data >>>>> >>>>> load => format_g729.so ;Raw G729 data >>>>> >>>>> load => format_gsm.so ;Raw GSM data >>>>> >>>>> load => format_h263.so ;Raw H.263 data >>>>> >>>>> load => format_h264.so ;Raw H.264 data >>>>> >>>>> load => format_ilbc.so ;Raw iLBC data >>>>> >>>>> noload => format_jpeg.so ;JPEG (Joint Picture >>>>> Experts Group) Image >>>>> >>>>> load => format_pcm.so ;Raw/Sun uLaw/ALaw 8KHz >>>>> (PCM,PCMA,AU), G. >>>>> >>>>> load => format_sln.so ;Raw Signed Linear Audio >>>>> support (SLN) >>>>> >>>>> load => format_vox.so ;Dialogic VOX (ADPCM) File >>>>> Format >>>>> >>>>> load => format_wav_gsm.so ;Microsoft WAV format >>>>> (Proprietary GSM) >>>>> >>>>> load => format_wav.so ;Microsoft WAV format >>>>> (8000Hz Signed Line >>>>> >>>>> >>>>> ; Functions >>>>> >>>>> >>>>> load => func_base64.so ;base64 encode/decode >>>>> dialplan functions >>>>> >>>>> load => func_callerid.so ;Caller ID related >>>>> dialplan function >>>>> >>>>> load => func_cdr.so ;CDR dialplan function >>>>> >>>>> load => func_channel.so ;Channel information >>>>> dialplan function >>>>> >>>>> load => func_curl.so ;Load external URL >>>>> >>>>> load => func_cut.so ;Cut out information from a >>>>> string >>>>> >>>>> load => func_db.so ;Database (astdb) related >>>>> dialplan functi >>>>> >>>>> load => func_enum.so ;ENUM related dialplan functions >>>>> >>>>> load => func_env.so ;Environment/filesystem >>>>> dialplan function >>>>> >>>>> load => func_global.so ;Global variable dialplan >>>>> functions >>>>> >>>>> load => func_groupcount.so ;Channel group dialplan >>>>> functions >>>>> >>>>> load => func_language.so ;Channel language >>>>> dialplan function >>>>> >>>>> load => func_logic.so ;Logical dialplan functions >>>>> >>>>> load => func_math.so ;Mathematical dialplan function >>>>> >>>>> load => func_md5.so ;MD5 digest dialplan functions >>>>> >>>>> load => func_moh.so ;Music-on-hold dialplan function >>>>> >>>>> load => func_rand.so ;Random number dialplan function >>>>> >>>>> load => func_realtime.so ;Read/Write values from a >>>>> RealTime reposi >>>>> >>>>> noload => func_sha1.so ;SHA-1 computation dialplan >>>>> function >>>>> >>>>> noload => func_strings.so ;String handling >>>>> dialplan functions >>>>> >>>>> noload => func_timeout.so ;Channel timeout >>>>> dialplan functions >>>>> >>>>> noload => func_uri.so ;URI encode/decode dialplan >>>>> functions >>>>> >>>>> >>>>> ; PBX >>>>> >>>>> >>>>> noload => pbx_ael.so ;Asterisk Extension Language >>>>> Compiler >>>>> >>>>> load => pbx_config.so ;Text Extension Configuration >>>>> >>>>> noload => pbx_dundi.so ;Distributed Universal >>>>> Number Discovery ( >>>>> >>>>> noload => pbx_loopback.so ;Loopback Switch >>>>> >>>>> noload => pbx_realtime.so ;Realtime Switch >>>>> >>>>> noload => pbx_spool.so ;Outgoing Spool Support >>>>> >>>>> >>>>> ; Resources >>>>> >>>>> >>>>> load => res_adsi.so ;ADSI Resource >>>>> >>>>> noload => res_agi.so ;Asterisk Gateway Interface >>>>> (AGI) >>>>> >>>>> noload => res_clioriginate.so ;Call origination >>>>> from the CLI >>>>> >>>>> noload => res_convert.so ;File format conversion >>>>> CLI command >>>>> >>>>> noload => res_crypto.so ;Cryptographic Digital >>>>> Signatures >>>>> >>>>> load => res_features.so ;Call Features Resource >>>>> >>>>> load => res_indications.so ;Indications Resource >>>>> >>>>> noload => res_jabber.so ;AJI - Asterisk Jabber >>>>> Interface >>>>> >>>>> noload => res_monitor.so ;Call Monitoring Resource >>>>> >>>>> noload => res_musiconhold.so ;Music On Hold Resource >>>>> >>>>> noload => res_smdi.so ;Simplified Message Desk >>>>> Interface (SMDI) >>>>> >>>>> noload => res_snmp.so ;SNMP [Sub]Agent for Asterisk >>>>> >>>>> noload => res_speech.so ;Generic Speech >>>>> Recognition API >>>>> >>>>> >>>>> [global] >>>>> >>>>> >>>>> >>>>> >>>>> /var/log/asterisk/messages; >>>>> >>>>> [Oct 8 08:44:24] NOTICE[1278] cdr.c: CDR simple >>>>> logging enabled. >>>>> >>>>> [Oct 8 08:44:24] NOTICE[1278] indications.c: >>>>> Removed default indication country 'us' >>>>> >>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: >>>>> Ignoring switchtype >>>>> >>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: >>>>> Ignoring signalling >>>>> >>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: >>>>> Ignoring rxwink >>>>> >>>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: >>>>> Ignoring bindport on reload >>>>> >>>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: >>>>> Ignoring bindaddr on reload >>>>> >>>>> [Oct 8 08:44:25] WARNING[1278] acl.c: is not a >>>>> valid IP >>>>> >>>>> [Oct 8 08:44:25] WARNING[714] chan_sip.c: >>>>> insecure=very at line 31 is deprecated; use >>>>> insecure=port,invite instead >>>>> >>>>> [Oct 8 08:47:46] NOTICE[683] cdr.c: CDR simple >>>>> logging enabled. >>>>> >>>>> [Oct 8 08:47:46] NOTICE[683] loader.c: 56 modules >>>>> will be loaded. >>>>> >>>>> [Oct 8 08:47:46] WARNING[683] acl.c: is not a >>>>> valid IP >>>>> >>>>> [Oct 8 08:47:46] WARNING[683] acl.c: Unable to >>>>> lookup 'callcentric.com <http://callcentric.com>' >>>>> >>>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: No such >>>>> host: callcentric.com <http://callcentric.com> >>>>> >>>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: Probably >>>>> a DNS error for registration to >>>>> 17772150287101(a)callcentric.com >>>>> <mailto:17772150287101@callcentric.com>, trying >>>>> REGISTER again (after 20 seconds) >>>>> >>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>>> Repeater Init 29626 >>>>> >>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>>> Repeater Init 29627 >>>>> >>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>>> Repeater Init 1001 >>>>> >>>>> [Oct 8 08:47:47] WARNING[722] chan_usbradio.c: >>>>> Loaded parameters from usbradio_tune_usb1001.conf >>>>> for device usb1001 . >>>>> >>>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: >>>>> Possibly stuck USB read channel. [usb1001] >>>>> >>>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: >>>>> Nope, USB read channel [usb1001] wasn't stuck >>>>> after all. >>>>> >>>>> [Oct 8 08:47:47] NOTICE[719] chan_simpleusb.c: >>>>> Assigned USB device 5-2:1.0 to simpleusb channel >>>>> usb29626 >>>>> >>>>> [Oct 8 08:47:47] WARNING[719] chan_simpleusb.c: >>>>> Loaded parameters from >>>>> simpleusb_tune_usb29626.conf for device usb29626 . >>>>> >>>>> [Oct 8 08:47:47] NOTICE[721] chan_usbradio.c: >>>>> Assigned USB device 5-2:1.0 to usbradio channel >>>>> usb29627 >>>>> >>>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: >>>>> Loaded parameters from usbradio_tune_usb29627.conf >>>>> for device usb29627 . >>>>> >>>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: >>>>> Unable to re-open DSP device 2 (usb29627): Device >>>>> or resource busy >>>>> >>>>> [Oct 8 08:48:06] NOTICE[714] chan_sip.c: -- >>>>> Registration for '17772150287101(a)callcentric.com >>>>> <mailto:17772150287101@callcentric.com>' timed >>>>> out, trying again (Attempt #1) >>>>> >>>>> [Oct 8 08:59:15] NOTICE[673] cdr.c: CDR simple >>>>> logging enabled. >>>>> >>>>> [Oct 8 08:59:15] NOTICE[673] loader.c: 57 modules >>>>> will be loaded. >>>>> >>>>> [Oct 8 08:59:15] WARNING[673] acl.c: is not a >>>>> valid IP >>>>> >>>>> [Oct 8 08:59:15] WARNING[673] acl.c: Unable to >>>>> lookup 'callcentric.com <http://callcentric.com>' >>>>> >>>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: No such >>>>> host: callcentric.com <http://callcentric.com> >>>>> >>>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: Probably >>>>> a DNS error for registration to >>>>> 17772150287101(a)callcentric.com >>>>> <mailto:17772150287101@callcentric.com>, trying >>>>> REGISTER again (after 20 seconds) >>>>> >>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>>> Repeater Init 29626 >>>>> >>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>>> Repeater Init 29627 >>>>> >>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>>> Repeater Init 1001 >>>>> >>>>> [Oct 8 08:59:15] WARNING[718] chan_usbradio.c: >>>>> Loaded parameters from usbradio_tune_usb29627.conf >>>>> for device usb29627 . >>>>> >>>>> [Oct 8 08:59:15] WARNING[715] chan_usbradio.c: >>>>> Possibly stuck USB read channel. [usb29627] >>>>> >>>>> [Oct 8 08:59:16] WARNING[715] chan_usbradio.c: >>>>> Nope, USB read channel [usb29627] wasn't stuck >>>>> after all. >>>>> >>>>> [Oct 8 08:59:16] NOTICE[719] chan_usbradio.c: >>>>> Assigned USB device 5-2:1.0 to usbradio channel >>>>> usb1001 >>>>> >>>>> [Oct 8 08:59:16] NOTICE[716] chan_simpleusb.c: >>>>> Assigned USB device 5-2:1.0 to simpleusb channel >>>>> usb29626 >>>>> >>>>> [Oct 8 08:59:16] WARNING[716] chan_simpleusb.c: >>>>> Loaded parameters from >>>>> simpleusb_tune_usb29626.conf for device usb29626 . >>>>> >>>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: >>>>> Loaded parameters from usbradio_tune_usb1001.conf >>>>> for device usb1001 . >>>>> >>>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: >>>>> Unable to re-open DSP device 2 (usb1001): Device >>>>> or resource busy >>>>> >>>>> [Oct 8 08:59:35] NOTICE[711] chan_sip.c: -- >>>>> Registration for '17772150287101(a)callcentric.com >>>>> <mailto:17772150287101@callcentric.com>' timed >>>>> out, trying again (Attempt #1) >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> - Is there something else to enable or a better >>>>> app to use, for feeding to broadcastify? >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)ohnosec.org >>>>> <mailto:App_rpt-users@ohnosec.org> >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>> >>>> -- >>>> "Anything is possible if you don't know what you are talking about." >>>> 1st Law of Logic >>>> >>>> >>> >>> -- >>> "Anything is possible if you don't know what you are talking about." >>> 1st Law of Logic >>> >>> >> >> -- >> "Anything is possible if you don't know what you are talking about." >> 1st Law of Logic >> >> > > -- > "Anything is possible if you don't know what you are talking about." > 1st Law of Logic > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] DIAL with Broadcastify etc via ezstream
by Steve Zingman 08 Oct '15

08 Oct '15

Mark, That's great. I'm glad the newer version of ezstream available to DIAL via ap-get work well. I have not touched Linux streaming since I stopped hosting a icecast server for a radio station on C Band subcarrier. I'll edit this into a test file and make sure it can be found for someone in the future. 73, Steve N4IRS On 10/08/2015 01:42 PM, Mark Johnston wrote: > Not sure if you saw my post about that a while back, using ACID it was > just much easier to install now, had to use a really old version of > ezstream before with the acid setup. > Now it works from the normal install that is available. > > > apt-get install ezstream lame > > I enabled this: load => app_chanspy.so ; Listen to the audio > of an active channel > not sure if that mattered though, seemed like it would be important... > > add this below the first section of the rpt.conf for the node you want > to broadcast. > > outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 > --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml > > ;ezstream1001.xml > > <ezstream> > > <url>http://audio3.broadcastify.com:80/mountpoint-provided-by-broadcastify</url> > > <sourcepassword>feed-specific-password-not-same-as-website-login</sourcepassword> > > <format>MP3</format> > > <filename>stdin</filename> > > <stream_once>1</stream_once> > > <reconnect_tries>0</reconnect_tries> > > <svrinfoname>Description</svrinfoname> > > <svrinfourl>http://www.radioreference.com/</svrinfourl> > > <svrinfogenre>Amateur Radio</svrinfogenre> > > <svrinfodescription>Description</svrinfodescription> > > <svrinfobitrate>16</svrinfobitrate> > > <svrinfochannels>1</svrinfochannels> > > <svrinfosamplerate>22050</svrinfosamplerate> > > <svrinfopublic>1</svrinfopublic> > > </ezstream> > > > > > > > "Got Root?" > > How many software engineers does it take to change a light bulb? > *None. It's a hardware problem.* > > > Unix is user friendly. It's just very particular about who it's > friends are. > WINDOWS: Will Install Needless Data On Whole System > MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools > Teenagers. > > > A ntennas > P oorly > P laced > L acks > E ngineering > > The best way to accelerate a computer running Windows is at 9.81 m/s². > > /*_/"I get paid to support Windows, I use Linux to get work done."/_*/ > > > On Thu, Oct 8, 2015 at 10:33 AM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > Good to hear. > It might be worth documenting what needs to be installed and any > tweaks that need to be done. > > 73, Steve N4IRS > > On 10/08/2015 01:30 PM, Mark Johnston wrote: >> it's streaming, I even did a reboot and it's live now - not sure >> what the problem was, maybe something on their end... >> >> http://www.broadcastify.com/listen/feed/21348/web >> >> "Got Root?" >> >> How many software engineers does it take to change a light bulb? >> *None. It's a hardware problem.* >> >> >> Unix is user friendly. It's just very particular about who it's >> friends are. >> WINDOWS: Will Install Needless Data On Whole System >> MICROSOFT: Most Intelligent Customers Realize Our Software Only >> Fools Teenagers. >> >> >> A ntennas >> P oorly >> P laced >> L acks >> E ngineering >> >> The best way to accelerate a computer running Windows is at 9.81 >> m/s². >> >> /*_/"I get paid to support Windows, I use Linux to get work >> done."/_*/ >> >> >> On Thu, Oct 8, 2015 at 10:20 AM, Steve Zingman >> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >> >> Working as in streaming from the node or sending a audio file? >> >> >> On 10/08/2015 01:19 PM, Mark Johnston wrote: >>> it gave me a login error >>> >>> ezstream: Connection to >>> http://audio3.broadcastify.com:80/wcms5pn74trz failed: Login >>> failed >>> >>> ezstream: Exiting ... >>> >>> >>> suddenly started working - not sure how/why though - >>> >>> >>> >>> "Got Root?" >>> >>> How many software engineers does it take to change a light bulb? >>> *None. It's a hardware problem.* >>> >>> >>> Unix is user friendly. It's just very particular about who >>> it's friends are. >>> WINDOWS: Will Install Needless Data On Whole System >>> MICROSOFT: Most Intelligent Customers Realize Our Software >>> Only Fools Teenagers. >>> >>> >>> A ntennas >>> P oorly >>> P laced >>> L acks >>> E ngineering >>> >>> The best way to accelerate a computer running Windows is at >>> 9.81 m/s². >>> >>> /*_/"I get paid to support Windows, I use Linux to get work >>> done."/_*/ >>> >>> >>> On Thu, Oct 8, 2015 at 10:06 AM, Steve Zingman >>> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >>> >>> can you send a audio file to broadcastify with the >>> command line below? >>> >>> >>> On 10/08/2015 01:00 PM, Mark Johnston wrote: >>>> >>>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 >>>> -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc >>>> /etc/ezstream1001.xml >>>> >>>> >>>> This just started appearing >>>> >>>> >>>> [Oct 8 09:35:48] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:50] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:52] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:54] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:56] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> [Oct 8 09:35:58] ERROR[695] app_rpt.c: pipe() failed! >>>> >>>> >>>> "Got Root?" >>>> >>>> How many software engineers does it take to change a >>>> light bulb? >>>> *None. It's a hardware problem.* >>>> >>>> >>>> Unix is user friendly. It's just very particular about >>>> who it's friends are. >>>> WINDOWS: Will Install Needless Data On Whole System >>>> MICROSOFT: Most Intelligent Customers Realize Our >>>> Software Only Fools Teenagers. >>>> >>>> >>>> A ntennas >>>> P oorly >>>> P laced >>>> L acks >>>> E ngineering >>>> >>>> The best way to accelerate a computer running Windows >>>> is at 9.81 m/s². >>>> >>>> /*_/"I get paid to support Windows, I use Linux to get >>>> work done."/_*/ >>>> >>>> >>>> On Thu, Oct 8, 2015 at 9:55 AM, Steve Zingman >>>> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >>>> >>>> Mark, >>>> Your log is showing problems with sip and possibly >>>> a sound fob. >>>> I don't think you need app_ices >>>> >>>> Please post you outstreamcmd in rpt.conf >>>> >>>> you may want to disable the sip changes while >>>> troubleshooting streaming. >>>> >>>> 73, Steve N4IRS >>>> >>>> >>>> >>>> On 10/08/2015 12:13 PM, Mark Johnston wrote: >>>>> Anyone try setting this up yet? >>>>> Used to use this with ACID just fine >>>>> Installed ezstream, and Lame - >>>>> >>>>> >>>>> shows it's running >>>>> >>>>> 1124 ? S 0:00 /bin/sh -c /usr/bin/lame >>>>> --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | >>>>> /usr/bin/ezstream -qvc /etc/ezstream1001.xml >>>>> >>>>> >>>>> I enabled this module, thinking thats what it needed >>>>> >>>>> load => app_ices.so ; Encode and Stream via >>>>> icecast and ices >>>>> >>>>> >>>>> >>>>> ;modules.conf >>>>> >>>>> autoload=no >>>>> >>>>> >>>>> ; Applications >>>>> >>>>> >>>>> noload => app_adsiprog.so ;Asterisk ADSI >>>>> Programming Application >>>>> >>>>> noload => app_alarmreceiver.so ;Alarm Receiver for >>>>> Asterisk >>>>> >>>>> noload => app_amd.so ;Answering Machine Detection >>>>> Application >>>>> >>>>> load => app_authenticate.so ; Authentication >>>>> Application >>>>> >>>>> noload => app_cdr.so ;Tell Asterisk to not >>>>> maintain a CDR for >>>>> >>>>> noload => app_chanisavail.so ;Check channel >>>>> availability >>>>> >>>>> noload => app_channelredirect.so ;Channel Redirect >>>>> >>>>> load => app_chanspy.so ;Listen to the audio of an >>>>> active channel >>>>> >>>>> noload => app_controlplayback.so ;Control Playback >>>>> Application >>>>> >>>>> noload => app_dahdibarge.so ;Barge in on channel >>>>> application >>>>> >>>>> noload => app_dahdiras.so ;DAHDI RAS Application >>>>> >>>>> noload => app_dahdiscan.so ;Scan Zap channels >>>>> application >>>>> >>>>> noload => app_db.so ;Database Access Functions >>>>> >>>>> load => app_dial.so ;Dialing Application >>>>> >>>>> noload => app_dictate.so ;Virtual Dictation Machine >>>>> >>>>> noload => app_directed_pickup.so ;Directed Call >>>>> Pickup Application >>>>> >>>>> noload => app_directory.so ;Extension Directory >>>>> >>>>> noload => app_disa.so ;DISA (Direct Inward System >>>>> Access) Appli >>>>> >>>>> noload => app_dumpchan.so ;Dump Info About The >>>>> Calling Channel >>>>> >>>>> noload => app_echo.so ;Simple Echo Application >>>>> >>>>> load => app_exec.so ;Executes dialplan applications >>>>> >>>>> noload => app_externalivr.so ;External IVR >>>>> Interface Application >>>>> >>>>> noload => app_festival.so ;Simple Festival Interface >>>>> >>>>> noload => app_flash.so ;Flash channel application >>>>> >>>>> noload => app_followme.so ;Find-Me/Follow-Me >>>>> Application >>>>> >>>>> noload => app_forkcdr.so ;Fork The CDR into 2 >>>>> separate entities >>>>> >>>>> noload => app_getcpeid.so ;Get ADSI CPE ID >>>>> >>>>> noload => app_gps.so ;GPS interface module >>>>> >>>>> noload => app_hasnewvoicemail.so ;Indicator for >>>>> whether a voice mailbox ha >>>>> >>>>> load => app_ices.so ;Encode and Stream via icecast >>>>> and ices >>>>> >>>>> noload => app_image.so ;Image Transmission >>>>> Application >>>>> >>>>> noload => app_lookupblacklist.so ;Look up >>>>> Caller*ID name/number from black >>>>> >>>>> noload => app_lookupcidname.so ;Look up CallerID >>>>> Name from local databas >>>>> >>>>> load => app_macro.so ;Extension Macros >>>>> >>>>> noload => app_meetme.so ;MeetMe conference bridge >>>>> >>>>> noload => app_milliwatt.so ;Digital Milliwatt >>>>> (mu-law) Test Applicat >>>>> >>>>> noload => app_mixmonitor.so ;Mixed Audio >>>>> Monitoring Application >>>>> >>>>> noload => app_morsecode.so ;Morse code >>>>> >>>>> noload => app_mp3.so ;Silly MP3 Application >>>>> >>>>> noload => app_nbscat.so ;Silly NBS Stream Application >>>>> >>>>> noload => app_page.so ;Page Multiple Phones >>>>> >>>>> noload => app_parkandannounce.so ;Call Parking and >>>>> Announce Application >>>>> >>>>> load => app_playback.so ;Sound File Playback >>>>> Application >>>>> >>>>> noload => app_privacy.so ;Require phone number to >>>>> be entered, if n >>>>> >>>>> noload => app_queue.so ;True Call Queueing >>>>> >>>>> noload => app_radbridge.so ;Radio Bridging >>>>> interface module >>>>> >>>>> noload => app_random.so ;Random goto >>>>> >>>>> noload => app_readfile.so ;Stores output of file >>>>> into a variable >>>>> >>>>> noload => app_read.so ;Read Variable Application >>>>> >>>>> noload => app_realtime.so ;Realtime Data >>>>> Lookup/Rewrite >>>>> >>>>> noload => app_record.so ;Trivial Record Application >>>>> >>>>> load => app_rpt.so ;Radio Repeater/Remote Base >>>>> Application >>>>> >>>>> noload => app_sayunixtime.so ;Say time >>>>> >>>>> load => app_senddtmf.so ;Send DTMF digits Application >>>>> >>>>> noload => app_sendtext.so ;Send Text Applications >>>>> >>>>> noload => app_setcallerid.so ;Set CallerID >>>>> Application >>>>> >>>>> noload => app_setcdruserfield.so ;CDR user field apps >>>>> >>>>> noload => app_settransfercapability.so ;Set ISDN >>>>> Transfer Capability >>>>> >>>>> noload => app_sms.so ;SMS/PSTN handler >>>>> >>>>> noload => app_softhangup.so ;Hangs up the >>>>> requested channel >>>>> >>>>> noload => app_speech_utils.so ;Dialplan Speech >>>>> Applications >>>>> >>>>> noload => app_stack.so ;Stack Routines >>>>> >>>>> load => app_system.so ;Generic System() application >>>>> >>>>> noload => app_talkdetect.so ;Playback with Talk >>>>> Detection >>>>> >>>>> noload => app_test.so ;Interface Test Application >>>>> >>>>> load => app_transfer.so ;Transfer >>>>> >>>>> noload => app_url.so ;Send URL Applications >>>>> >>>>> noload => app_userevent.so ;Custom User Event >>>>> Application >>>>> >>>>> noload => app_verbose.so ;Send verbose output >>>>> >>>>> noload => app_voicemail.so ;Comedian Mail >>>>> (Voicemail System) >>>>> >>>>> noload => app_waitforring.so ;Waits until first >>>>> ring after time >>>>> >>>>> noload => app_waitforsilence.so ;Wait For Silence >>>>> >>>>> noload => app_while.so ;While Loops and >>>>> Conditional Execution >>>>> >>>>> noload => app_zapateller.so ;Block Telemarketers >>>>> with Special Informa >>>>> >>>>> >>>>> ; CDR >>>>> >>>>> >>>>> noload => cdr_csv.so ;Comma Separated Values CDR >>>>> Backend >>>>> >>>>> noload => cdr_custom.so ;Customizable Comma >>>>> Separated Values CDR >>>>> >>>>> noload => cdr_manager.so ;Asterisk Manager >>>>> Interface CDR Backend >>>>> >>>>> >>>>> ; Channels >>>>> >>>>> >>>>> noload => chan_agent.so ;Agent Proxy Channel >>>>> >>>>> noload => chan_alsa.so ;ALSA Console Channel Driver >>>>> >>>>> noload => chan_beagle.so ;Beagleboard Radio >>>>> Interface Channel Driver >>>>> >>>>> load => chan_dahdi.so ;DAHDI Telephony >>>>> >>>>> noload => chan_echolink.so ;echolink channel driver >>>>> >>>>> noload => chan_features.so ;Feature Proxy Channel >>>>> >>>>> noload => chan_gtalk.so ;Gtalk Channel Driver >>>>> >>>>> load => chan_iax2.so ;Inter Asterisk eXchange (Ver 2) >>>>> >>>>> load => chan_local.so ;Local Proxy Channel (Note: >>>>> used internal >>>>> >>>>> noload => chan_oss.so ; >>>>> >>>>> noload => chan_phone.so ; >>>>> >>>>> load => chan_simpleusb.so ;Simple USB Radio >>>>> Interface Channel Drive >>>>> >>>>> load => chan_sip.so ;Session Initiation Protocol >>>>> (SIP) >>>>> >>>>> noload => chan_tlb.so ;TheLinkBox channel driver >>>>> >>>>> load => chan_usbradio.so ;USB Console Channel Driver >>>>> >>>>> noload => chan_usrp.so ;USRP Channel Module >>>>> >>>>> noload => chan_voter.so ;radio Voter channel driver >>>>> >>>>> >>>>> ; Codecs >>>>> >>>>> >>>>> ; CODEC AUDIO QUALITY BANDWIDTH (including IP >>>>> and Ethernet headers) >>>>> >>>>> ; ULAW best 87 kilobits per second (kbps) >>>>> >>>>> ; ADPCM good 55 kbps >>>>> >>>>> ; GSM mediocre 36 kbps >>>>> >>>>> ; g726aal2 >>>>> >>>>> ; ilbc >>>>> >>>>> >>>>> load => codec_adpcm.so ;Adaptive Differential PCM >>>>> Coder/Decoder >>>>> >>>>> load => codec_alaw.so ;A-law Coder/Decoder >>>>> >>>>> load => codec_a_mu.so ;A-law and Mulaw direct >>>>> Coder/Decoder >>>>> >>>>> noload => codec_dahdi.so ;Generic DAHDI Transcoder >>>>> Codec Translato >>>>> >>>>> load => codec_g726.so ;ITU G.726-32kbps G726 >>>>> Transcoder >>>>> >>>>> load => codec_gsm.so ;GSM Coder/Decoder >>>>> >>>>> load => codec_ulaw.so ;mu-Law Coder/Decoder >>>>> >>>>> noload => codec_ilbc.so >>>>> ;http://en.wikipedia.org/wiki/Internet_Low_Bitrate_Codec >>>>> >>>>> >>>>> ; Formats >>>>> >>>>> >>>>> load => format_g723.so ;G.723.1 Simple Timestamp >>>>> File Format >>>>> >>>>> load => format_g726.so ;Raw G.726 >>>>> (16/24/32/40kbps) data >>>>> >>>>> load => format_g729.so ;Raw G729 data >>>>> >>>>> load => format_gsm.so ;Raw GSM data >>>>> >>>>> load => format_h263.so ;Raw H.263 data >>>>> >>>>> load => format_h264.so ;Raw H.264 data >>>>> >>>>> load => format_ilbc.so ;Raw iLBC data >>>>> >>>>> noload => format_jpeg.so ;JPEG (Joint Picture >>>>> Experts Group) Image >>>>> >>>>> load => format_pcm.so ;Raw/Sun uLaw/ALaw 8KHz >>>>> (PCM,PCMA,AU), G. >>>>> >>>>> load => format_sln.so ;Raw Signed Linear Audio >>>>> support (SLN) >>>>> >>>>> load => format_vox.so ;Dialogic VOX (ADPCM) File >>>>> Format >>>>> >>>>> load => format_wav_gsm.so ;Microsoft WAV format >>>>> (Proprietary GSM) >>>>> >>>>> load => format_wav.so ;Microsoft WAV format >>>>> (8000Hz Signed Line >>>>> >>>>> >>>>> ; Functions >>>>> >>>>> >>>>> load => func_base64.so ;base64 encode/decode >>>>> dialplan functions >>>>> >>>>> load => func_callerid.so ;Caller ID related >>>>> dialplan function >>>>> >>>>> load => func_cdr.so ;CDR dialplan function >>>>> >>>>> load => func_channel.so ;Channel information >>>>> dialplan function >>>>> >>>>> load => func_curl.so ;Load external URL >>>>> >>>>> load => func_cut.so ;Cut out information from a >>>>> string >>>>> >>>>> load => func_db.so ;Database (astdb) related >>>>> dialplan functi >>>>> >>>>> load => func_enum.so ;ENUM related dialplan functions >>>>> >>>>> load => func_env.so ;Environment/filesystem >>>>> dialplan function >>>>> >>>>> load => func_global.so ;Global variable dialplan >>>>> functions >>>>> >>>>> load => func_groupcount.so ;Channel group dialplan >>>>> functions >>>>> >>>>> load => func_language.so ;Channel language >>>>> dialplan function >>>>> >>>>> load => func_logic.so ;Logical dialplan functions >>>>> >>>>> load => func_math.so ;Mathematical dialplan function >>>>> >>>>> load => func_md5.so ;MD5 digest dialplan functions >>>>> >>>>> load => func_moh.so ;Music-on-hold dialplan function >>>>> >>>>> load => func_rand.so ;Random number dialplan function >>>>> >>>>> load => func_realtime.so ;Read/Write values from a >>>>> RealTime reposi >>>>> >>>>> noload => func_sha1.so ;SHA-1 computation dialplan >>>>> function >>>>> >>>>> noload => func_strings.so ;String handling >>>>> dialplan functions >>>>> >>>>> noload => func_timeout.so ;Channel timeout >>>>> dialplan functions >>>>> >>>>> noload => func_uri.so ;URI encode/decode dialplan >>>>> functions >>>>> >>>>> >>>>> ; PBX >>>>> >>>>> >>>>> noload => pbx_ael.so ;Asterisk Extension Language >>>>> Compiler >>>>> >>>>> load => pbx_config.so ;Text Extension Configuration >>>>> >>>>> noload => pbx_dundi.so ;Distributed Universal >>>>> Number Discovery ( >>>>> >>>>> noload => pbx_loopback.so ;Loopback Switch >>>>> >>>>> noload => pbx_realtime.so ;Realtime Switch >>>>> >>>>> noload => pbx_spool.so ;Outgoing Spool Support >>>>> >>>>> >>>>> ; Resources >>>>> >>>>> >>>>> load => res_adsi.so ;ADSI Resource >>>>> >>>>> noload => res_agi.so ;Asterisk Gateway Interface >>>>> (AGI) >>>>> >>>>> noload => res_clioriginate.so ;Call origination >>>>> from the CLI >>>>> >>>>> noload => res_convert.so ;File format conversion >>>>> CLI command >>>>> >>>>> noload => res_crypto.so ;Cryptographic Digital >>>>> Signatures >>>>> >>>>> load => res_features.so ;Call Features Resource >>>>> >>>>> load => res_indications.so ;Indications Resource >>>>> >>>>> noload => res_jabber.so ;AJI - Asterisk Jabber >>>>> Interface >>>>> >>>>> noload => res_monitor.so ;Call Monitoring Resource >>>>> >>>>> noload => res_musiconhold.so ;Music On Hold Resource >>>>> >>>>> noload => res_smdi.so ;Simplified Message Desk >>>>> Interface (SMDI) >>>>> >>>>> noload => res_snmp.so ;SNMP [Sub]Agent for Asterisk >>>>> >>>>> noload => res_speech.so ;Generic Speech >>>>> Recognition API >>>>> >>>>> >>>>> [global] >>>>> >>>>> >>>>> >>>>> >>>>> /var/log/asterisk/messages; >>>>> >>>>> [Oct 8 08:44:24] NOTICE[1278] cdr.c: CDR simple >>>>> logging enabled. >>>>> >>>>> [Oct 8 08:44:24] NOTICE[1278] indications.c: >>>>> Removed default indication country 'us' >>>>> >>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: >>>>> Ignoring switchtype >>>>> >>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: >>>>> Ignoring signalling >>>>> >>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: >>>>> Ignoring rxwink >>>>> >>>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: >>>>> Ignoring bindport on reload >>>>> >>>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: >>>>> Ignoring bindaddr on reload >>>>> >>>>> [Oct 8 08:44:25] WARNING[1278] acl.c: is not a >>>>> valid IP >>>>> >>>>> [Oct 8 08:44:25] WARNING[714] chan_sip.c: >>>>> insecure=very at line 31 is deprecated; use >>>>> insecure=port,invite instead >>>>> >>>>> [Oct 8 08:47:46] NOTICE[683] cdr.c: CDR simple >>>>> logging enabled. >>>>> >>>>> [Oct 8 08:47:46] NOTICE[683] loader.c: 56 modules >>>>> will be loaded. >>>>> >>>>> [Oct 8 08:47:46] WARNING[683] acl.c: is not a >>>>> valid IP >>>>> >>>>> [Oct 8 08:47:46] WARNING[683] acl.c: Unable to >>>>> lookup 'callcentric.com <http://callcentric.com>' >>>>> >>>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: No such >>>>> host: callcentric.com <http://callcentric.com> >>>>> >>>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: Probably >>>>> a DNS error for registration to >>>>> 17772150287101(a)callcentric.com >>>>> <mailto:17772150287101@callcentric.com>, trying >>>>> REGISTER again (after 20 seconds) >>>>> >>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>>> Repeater Init 29626 >>>>> >>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>>> Repeater Init 29627 >>>>> >>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>>> Repeater Init 1001 >>>>> >>>>> [Oct 8 08:47:47] WARNING[722] chan_usbradio.c: >>>>> Loaded parameters from usbradio_tune_usb1001.conf >>>>> for device usb1001 . >>>>> >>>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: >>>>> Possibly stuck USB read channel. [usb1001] >>>>> >>>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: >>>>> Nope, USB read channel [usb1001] wasn't stuck >>>>> after all. >>>>> >>>>> [Oct 8 08:47:47] NOTICE[719] chan_simpleusb.c: >>>>> Assigned USB device 5-2:1.0 to simpleusb channel >>>>> usb29626 >>>>> >>>>> [Oct 8 08:47:47] WARNING[719] chan_simpleusb.c: >>>>> Loaded parameters from >>>>> simpleusb_tune_usb29626.conf for device usb29626 . >>>>> >>>>> [Oct 8 08:47:47] NOTICE[721] chan_usbradio.c: >>>>> Assigned USB device 5-2:1.0 to usbradio channel >>>>> usb29627 >>>>> >>>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: >>>>> Loaded parameters from usbradio_tune_usb29627.conf >>>>> for device usb29627 . >>>>> >>>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: >>>>> Unable to re-open DSP device 2 (usb29627): Device >>>>> or resource busy >>>>> >>>>> [Oct 8 08:48:06] NOTICE[714] chan_sip.c: -- >>>>> Registration for '17772150287101(a)callcentric.com >>>>> <mailto:17772150287101@callcentric.com>' timed >>>>> out, trying again (Attempt #1) >>>>> >>>>> [Oct 8 08:59:15] NOTICE[673] cdr.c: CDR simple >>>>> logging enabled. >>>>> >>>>> [Oct 8 08:59:15] NOTICE[673] loader.c: 57 modules >>>>> will be loaded. >>>>> >>>>> [Oct 8 08:59:15] WARNING[673] acl.c: is not a >>>>> valid IP >>>>> >>>>> [Oct 8 08:59:15] WARNING[673] acl.c: Unable to >>>>> lookup 'callcentric.com <http://callcentric.com>' >>>>> >>>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: No such >>>>> host: callcentric.com <http://callcentric.com> >>>>> >>>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: Probably >>>>> a DNS error for registration to >>>>> 17772150287101(a)callcentric.com >>>>> <mailto:17772150287101@callcentric.com>, trying >>>>> REGISTER again (after 20 seconds) >>>>> >>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>>> Repeater Init 29626 >>>>> >>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>>> Repeater Init 29627 >>>>> >>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>>> Repeater Init 1001 >>>>> >>>>> [Oct 8 08:59:15] WARNING[718] chan_usbradio.c: >>>>> Loaded parameters from usbradio_tune_usb29627.conf >>>>> for device usb29627 . >>>>> >>>>> [Oct 8 08:59:15] WARNING[715] chan_usbradio.c: >>>>> Possibly stuck USB read channel. [usb29627] >>>>> >>>>> [Oct 8 08:59:16] WARNING[715] chan_usbradio.c: >>>>> Nope, USB read channel [usb29627] wasn't stuck >>>>> after all. >>>>> >>>>> [Oct 8 08:59:16] NOTICE[719] chan_usbradio.c: >>>>> Assigned USB device 5-2:1.0 to usbradio channel >>>>> usb1001 >>>>> >>>>> [Oct 8 08:59:16] NOTICE[716] chan_simpleusb.c: >>>>> Assigned USB device 5-2:1.0 to simpleusb channel >>>>> usb29626 >>>>> >>>>> [Oct 8 08:59:16] WARNING[716] chan_simpleusb.c: >>>>> Loaded parameters from >>>>> simpleusb_tune_usb29626.conf for device usb29626 . >>>>> >>>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: >>>>> Loaded parameters from usbradio_tune_usb1001.conf >>>>> for device usb1001 . >>>>> >>>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: >>>>> Unable to re-open DSP device 2 (usb1001): Device >>>>> or resource busy >>>>> >>>>> [Oct 8 08:59:35] NOTICE[711] chan_sip.c: -- >>>>> Registration for '17772150287101(a)callcentric.com >>>>> <mailto:17772150287101@callcentric.com>' timed >>>>> out, trying again (Attempt #1) >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> - Is there something else to enable or a better >>>>> app to use, for feeding to broadcastify? >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)ohnosec.org >>>>> <mailto:App_rpt-users@ohnosec.org> >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>> >>>> -- >>>> "Anything is possible if you don't know what you are talking about." >>>> 1st Law of Logic >>>> >>>> >>> >>> -- >>> "Anything is possible if you don't know what you are talking about." >>> 1st Law of Logic >>> >>> >> >> -- >> "Anything is possible if you don't know what you are talking about." >> 1st Law of Logic >> >> > > -- > "Anything is possible if you don't know what you are talking about." > 1st Law of Logic > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

DIAL with Broadcastify etc via ezstream
by Steve Zingman 08 Oct '15

08 Oct '15

Good to hear. It might be worth documenting what needs to be installed and any tweaks that need to be done. 73, Steve N4IRS On 10/08/2015 01:30 PM, Mark Johnston wrote: > it's streaming, I even did a reboot and it's live now - not sure what > the problem was, maybe something on their end... > > http://www.broadcastify.com/listen/feed/21348/web > > "Got Root?" > > How many software engineers does it take to change a light bulb? > *None. It's a hardware problem.* > > > Unix is user friendly. It's just very particular about who it's > friends are. > WINDOWS: Will Install Needless Data On Whole System > MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools > Teenagers. > > > A ntennas > P oorly > P laced > L acks > E ngineering > > The best way to accelerate a computer running Windows is at 9.81 m/s². > > /*_/"I get paid to support Windows, I use Linux to get work done."/_*/ > > > On Thu, Oct 8, 2015 at 10:20 AM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > Working as in streaming from the node or sending a audio file? > > > On 10/08/2015 01:19 PM, Mark Johnston wrote: >> it gave me a login error >> >> ezstream: Connection to >> http://audio3.broadcastify.com:80/wcms5pn74trz failed: Login failed >> >> ezstream: Exiting ... >> >> >> suddenly started working - not sure how/why though - >> >> >> >> "Got Root?" >> >> How many software engineers does it take to change a light bulb? >> *None. It's a hardware problem.* >> >> >> Unix is user friendly. It's just very particular about who it's >> friends are. >> WINDOWS: Will Install Needless Data On Whole System >> MICROSOFT: Most Intelligent Customers Realize Our Software Only >> Fools Teenagers. >> >> >> A ntennas >> P oorly >> P laced >> L acks >> E ngineering >> >> The best way to accelerate a computer running Windows is at 9.81 >> m/s². >> >> /*_/"I get paid to support Windows, I use Linux to get work >> done."/_*/ >> >> >> On Thu, Oct 8, 2015 at 10:06 AM, Steve Zingman >> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >> >> can you send a audio file to broadcastify with the command >> line below? >> >> >> On 10/08/2015 01:00 PM, Mark Johnston wrote: >>> >>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m >>> m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc >>> /etc/ezstream1001.xml >>> >>> >>> This just started appearing >>> >>> >>> [Oct 8 09:35:48] ERROR[695] app_rpt.c: pipe() failed! >>> >>> [Oct 8 09:35:50] ERROR[695] app_rpt.c: pipe() failed! >>> >>> [Oct 8 09:35:52] ERROR[695] app_rpt.c: pipe() failed! >>> >>> [Oct 8 09:35:54] ERROR[695] app_rpt.c: pipe() failed! >>> >>> [Oct 8 09:35:56] ERROR[695] app_rpt.c: pipe() failed! >>> >>> [Oct 8 09:35:58] ERROR[695] app_rpt.c: pipe() failed! >>> >>> >>> "Got Root?" >>> >>> How many software engineers does it take to change a light bulb? >>> *None. It's a hardware problem.* >>> >>> >>> Unix is user friendly. It's just very particular about who >>> it's friends are. >>> WINDOWS: Will Install Needless Data On Whole System >>> MICROSOFT: Most Intelligent Customers Realize Our Software >>> Only Fools Teenagers. >>> >>> >>> A ntennas >>> P oorly >>> P laced >>> L acks >>> E ngineering >>> >>> The best way to accelerate a computer running Windows is at >>> 9.81 m/s². >>> >>> /*_/"I get paid to support Windows, I use Linux to get work >>> done."/_*/ >>> >>> >>> On Thu, Oct 8, 2015 at 9:55 AM, Steve Zingman >>> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >>> >>> Mark, >>> Your log is showing problems with sip and possibly a >>> sound fob. >>> I don't think you need app_ices >>> >>> Please post you outstreamcmd in rpt.conf >>> >>> you may want to disable the sip changes while >>> troubleshooting streaming. >>> >>> 73, Steve N4IRS >>> >>> >>> >>> On 10/08/2015 12:13 PM, Mark Johnston wrote: >>>> Anyone try setting this up yet? >>>> Used to use this with ACID just fine >>>> Installed ezstream, and Lame - >>>> >>>> >>>> shows it's running >>>> >>>> 1124 ? S 0:00 /bin/sh -c /usr/bin/lame >>>> --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | >>>> /usr/bin/ezstream -qvc /etc/ezstream1001.xml >>>> >>>> >>>> I enabled this module, thinking thats what it needed >>>> >>>> load => app_ices.so ; Encode and Stream via icecast and >>>> ices >>>> >>>> >>>> >>>> ;modules.conf >>>> >>>> autoload=no >>>> >>>> >>>> ; Applications >>>> >>>> >>>> noload => app_adsiprog.so ;Asterisk ADSI Programming >>>> Application >>>> >>>> noload => app_alarmreceiver.so ;Alarm Receiver for >>>> Asterisk >>>> >>>> noload => app_amd.so ;Answering Machine Detection >>>> Application >>>> >>>> load => app_authenticate.so ; Authentication Application >>>> >>>> noload => app_cdr.so ;Tell Asterisk to not maintain a >>>> CDR for >>>> >>>> noload => app_chanisavail.so ;Check channel availability >>>> >>>> noload => app_channelredirect.so ;Channel Redirect >>>> >>>> load => app_chanspy.so ;Listen to the audio of an >>>> active channel >>>> >>>> noload => app_controlplayback.so ;Control Playback >>>> Application >>>> >>>> noload => app_dahdibarge.so ;Barge in on channel >>>> application >>>> >>>> noload => app_dahdiras.so ;DAHDI RAS Application >>>> >>>> noload => app_dahdiscan.so ;Scan Zap channels application >>>> >>>> noload => app_db.so ;Database Access Functions >>>> >>>> load => app_dial.so ;Dialing Application >>>> >>>> noload => app_dictate.so ;Virtual Dictation Machine >>>> >>>> noload => app_directed_pickup.so ;Directed Call Pickup >>>> Application >>>> >>>> noload => app_directory.so ;Extension Directory >>>> >>>> noload => app_disa.so ;DISA (Direct Inward System >>>> Access) Appli >>>> >>>> noload => app_dumpchan.so ;Dump Info About The Calling >>>> Channel >>>> >>>> noload => app_echo.so ;Simple Echo Application >>>> >>>> load => app_exec.so ;Executes dialplan applications >>>> >>>> noload => app_externalivr.so ;External IVR Interface >>>> Application >>>> >>>> noload => app_festival.so ;Simple Festival Interface >>>> >>>> noload => app_flash.so ;Flash channel application >>>> >>>> noload => app_followme.so ;Find-Me/Follow-Me Application >>>> >>>> noload => app_forkcdr.so ;Fork The CDR into 2 separate >>>> entities >>>> >>>> noload => app_getcpeid.so ;Get ADSI CPE ID >>>> >>>> noload => app_gps.so ;GPS interface module >>>> >>>> noload => app_hasnewvoicemail.so ;Indicator for whether >>>> a voice mailbox ha >>>> >>>> load => app_ices.so ;Encode and Stream via icecast and >>>> ices >>>> >>>> noload => app_image.so ;Image Transmission Application >>>> >>>> noload => app_lookupblacklist.so ;Look up Caller*ID >>>> name/number from black >>>> >>>> noload => app_lookupcidname.so ;Look up CallerID Name >>>> from local databas >>>> >>>> load => app_macro.so ;Extension Macros >>>> >>>> noload => app_meetme.so ;MeetMe conference bridge >>>> >>>> noload => app_milliwatt.so ;Digital Milliwatt (mu-law) >>>> Test Applicat >>>> >>>> noload => app_mixmonitor.so ;Mixed Audio Monitoring >>>> Application >>>> >>>> noload => app_morsecode.so ;Morse code >>>> >>>> noload => app_mp3.so ;Silly MP3 Application >>>> >>>> noload => app_nbscat.so ;Silly NBS Stream Application >>>> >>>> noload => app_page.so ;Page Multiple Phones >>>> >>>> noload => app_parkandannounce.so ;Call Parking and >>>> Announce Application >>>> >>>> load => app_playback.so ;Sound File Playback Application >>>> >>>> noload => app_privacy.so ;Require phone number to be >>>> entered, if n >>>> >>>> noload => app_queue.so ;True Call Queueing >>>> >>>> noload => app_radbridge.so ;Radio Bridging interface >>>> module >>>> >>>> noload => app_random.so ;Random goto >>>> >>>> noload => app_readfile.so ;Stores output of file into a >>>> variable >>>> >>>> noload => app_read.so ;Read Variable Application >>>> >>>> noload => app_realtime.so ;Realtime Data Lookup/Rewrite >>>> >>>> noload => app_record.so ;Trivial Record Application >>>> >>>> load => app_rpt.so ;Radio Repeater/Remote Base Application >>>> >>>> noload => app_sayunixtime.so ;Say time >>>> >>>> load => app_senddtmf.so ;Send DTMF digits Application >>>> >>>> noload => app_sendtext.so ;Send Text Applications >>>> >>>> noload => app_setcallerid.so ;Set CallerID Application >>>> >>>> noload => app_setcdruserfield.so ;CDR user field apps >>>> >>>> noload => app_settransfercapability.so ;Set ISDN >>>> Transfer Capability >>>> >>>> noload => app_sms.so ;SMS/PSTN handler >>>> >>>> noload => app_softhangup.so ;Hangs up the requested >>>> channel >>>> >>>> noload => app_speech_utils.so ;Dialplan Speech >>>> Applications >>>> >>>> noload => app_stack.so ;Stack Routines >>>> >>>> load => app_system.so ;Generic System() application >>>> >>>> noload => app_talkdetect.so ;Playback with Talk Detection >>>> >>>> noload => app_test.so ;Interface Test Application >>>> >>>> load => app_transfer.so ;Transfer >>>> >>>> noload => app_url.so ;Send URL Applications >>>> >>>> noload => app_userevent.so ;Custom User Event Application >>>> >>>> noload => app_verbose.so ;Send verbose output >>>> >>>> noload => app_voicemail.so ;Comedian Mail (Voicemail >>>> System) >>>> >>>> noload => app_waitforring.so ;Waits until first ring >>>> after time >>>> >>>> noload => app_waitforsilence.so ;Wait For Silence >>>> >>>> noload => app_while.so ;While Loops and Conditional >>>> Execution >>>> >>>> noload => app_zapateller.so ;Block Telemarketers with >>>> Special Informa >>>> >>>> >>>> ; CDR >>>> >>>> >>>> noload => cdr_csv.so ;Comma Separated Values CDR Backend >>>> >>>> noload => cdr_custom.so ;Customizable Comma Separated >>>> Values CDR >>>> >>>> noload => cdr_manager.so ;Asterisk Manager Interface >>>> CDR Backend >>>> >>>> >>>> ; Channels >>>> >>>> >>>> noload => chan_agent.so ;Agent Proxy Channel >>>> >>>> noload => chan_alsa.so ;ALSA Console Channel Driver >>>> >>>> noload => chan_beagle.so ;Beagleboard Radio Interface >>>> Channel Driver >>>> >>>> load => chan_dahdi.so ;DAHDI Telephony >>>> >>>> noload => chan_echolink.so ;echolink channel driver >>>> >>>> noload => chan_features.so ;Feature Proxy Channel >>>> >>>> noload => chan_gtalk.so ;Gtalk Channel Driver >>>> >>>> load => chan_iax2.so ;Inter Asterisk eXchange (Ver 2) >>>> >>>> load => chan_local.so ;Local Proxy Channel (Note: used >>>> internal >>>> >>>> noload => chan_oss.so ; >>>> >>>> noload => chan_phone.so ; >>>> >>>> load => chan_simpleusb.so ;Simple USB Radio Interface >>>> Channel Drive >>>> >>>> load => chan_sip.so ;Session Initiation Protocol (SIP) >>>> >>>> noload => chan_tlb.so ;TheLinkBox channel driver >>>> >>>> load => chan_usbradio.so ;USB Console Channel Driver >>>> >>>> noload => chan_usrp.so ;USRP Channel Module >>>> >>>> noload => chan_voter.so ;radio Voter channel driver >>>> >>>> >>>> ; Codecs >>>> >>>> >>>> ; CODEC AUDIO QUALITY BANDWIDTH (including IP and >>>> Ethernet headers) >>>> >>>> ; ULAW best 87 kilobits per second (kbps) >>>> >>>> ; ADPCM good 55 kbps >>>> >>>> ; GSM mediocre 36 kbps >>>> >>>> ; g726aal2 >>>> >>>> ; ilbc >>>> >>>> >>>> load => codec_adpcm.so ;Adaptive Differential PCM >>>> Coder/Decoder >>>> >>>> load => codec_alaw.so ;A-law Coder/Decoder >>>> >>>> load => codec_a_mu.so ;A-law and Mulaw direct >>>> Coder/Decoder >>>> >>>> noload => codec_dahdi.so ;Generic DAHDI Transcoder >>>> Codec Translato >>>> >>>> load => codec_g726.so ;ITU G.726-32kbps G726 Transcoder >>>> >>>> load => codec_gsm.so ;GSM Coder/Decoder >>>> >>>> load => codec_ulaw.so ;mu-Law Coder/Decoder >>>> >>>> noload => codec_ilbc.so >>>> ;http://en.wikipedia.org/wiki/Internet_Low_Bitrate_Codec >>>> >>>> >>>> ; Formats >>>> >>>> >>>> load => format_g723.so ;G.723.1 Simple Timestamp File >>>> Format >>>> >>>> load => format_g726.so ;Raw G.726 (16/24/32/40kbps) data >>>> >>>> load => format_g729.so ;Raw G729 data >>>> >>>> load => format_gsm.so ;Raw GSM data >>>> >>>> load => format_h263.so ;Raw H.263 data >>>> >>>> load => format_h264.so ;Raw H.264 data >>>> >>>> load => format_ilbc.so ;Raw iLBC data >>>> >>>> noload => format_jpeg.so ;JPEG (Joint Picture Experts >>>> Group) Image >>>> >>>> load => format_pcm.so ;Raw/Sun uLaw/ALaw 8KHz >>>> (PCM,PCMA,AU), G. >>>> >>>> load => format_sln.so ;Raw Signed Linear Audio support >>>> (SLN) >>>> >>>> load => format_vox.so ;Dialogic VOX (ADPCM) File Format >>>> >>>> load => format_wav_gsm.so ;Microsoft WAV format >>>> (Proprietary GSM) >>>> >>>> load => format_wav.so ;Microsoft WAV format (8000Hz >>>> Signed Line >>>> >>>> >>>> ; Functions >>>> >>>> >>>> load => func_base64.so ;base64 encode/decode dialplan >>>> functions >>>> >>>> load => func_callerid.so ;Caller ID related dialplan >>>> function >>>> >>>> load => func_cdr.so ;CDR dialplan function >>>> >>>> load => func_channel.so ;Channel information dialplan >>>> function >>>> >>>> load => func_curl.so ;Load external URL >>>> >>>> load => func_cut.so ;Cut out information from a string >>>> >>>> load => func_db.so ;Database (astdb) related dialplan >>>> functi >>>> >>>> load => func_enum.so ;ENUM related dialplan functions >>>> >>>> load => func_env.so ;Environment/filesystem dialplan >>>> function >>>> >>>> load => func_global.so ;Global variable dialplan functions >>>> >>>> load => func_groupcount.so ;Channel group dialplan >>>> functions >>>> >>>> load => func_language.so ;Channel language dialplan >>>> function >>>> >>>> load => func_logic.so ;Logical dialplan functions >>>> >>>> load => func_math.so ;Mathematical dialplan function >>>> >>>> load => func_md5.so ;MD5 digest dialplan functions >>>> >>>> load => func_moh.so ;Music-on-hold dialplan function >>>> >>>> load => func_rand.so ;Random number dialplan function >>>> >>>> load => func_realtime.so ;Read/Write values from a >>>> RealTime reposi >>>> >>>> noload => func_sha1.so ;SHA-1 computation dialplan >>>> function >>>> >>>> noload => func_strings.so ;String handling dialplan >>>> functions >>>> >>>> noload => func_timeout.so ;Channel timeout dialplan >>>> functions >>>> >>>> noload => func_uri.so ;URI encode/decode dialplan >>>> functions >>>> >>>> >>>> ; PBX >>>> >>>> >>>> noload => pbx_ael.so ;Asterisk Extension Language Compiler >>>> >>>> load => pbx_config.so ;Text Extension Configuration >>>> >>>> noload => pbx_dundi.so ;Distributed Universal Number >>>> Discovery ( >>>> >>>> noload => pbx_loopback.so ;Loopback Switch >>>> >>>> noload => pbx_realtime.so ;Realtime Switch >>>> >>>> noload => pbx_spool.so ;Outgoing Spool Support >>>> >>>> >>>> ; Resources >>>> >>>> >>>> load => res_adsi.so ;ADSI Resource >>>> >>>> noload => res_agi.so ;Asterisk Gateway Interface (AGI) >>>> >>>> noload => res_clioriginate.so ;Call origination from >>>> the CLI >>>> >>>> noload => res_convert.so ;File format conversion CLI >>>> command >>>> >>>> noload => res_crypto.so ;Cryptographic Digital Signatures >>>> >>>> load => res_features.so ;Call Features Resource >>>> >>>> load => res_indications.so ;Indications Resource >>>> >>>> noload => res_jabber.so ;AJI - Asterisk Jabber Interface >>>> >>>> noload => res_monitor.so ;Call Monitoring Resource >>>> >>>> noload => res_musiconhold.so ;Music On Hold Resource >>>> >>>> noload => res_smdi.so ;Simplified Message Desk >>>> Interface (SMDI) >>>> >>>> noload => res_snmp.so ;SNMP [Sub]Agent for Asterisk >>>> >>>> noload => res_speech.so ;Generic Speech Recognition API >>>> >>>> >>>> [global] >>>> >>>> >>>> >>>> >>>> /var/log/asterisk/messages; >>>> >>>> [Oct 8 08:44:24] NOTICE[1278] cdr.c: CDR simple >>>> logging enabled. >>>> >>>> [Oct 8 08:44:24] NOTICE[1278] indications.c: Removed >>>> default indication country 'us' >>>> >>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring >>>> switchtype >>>> >>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring >>>> signalling >>>> >>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring >>>> rxwink >>>> >>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring >>>> bindport on reload >>>> >>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring >>>> bindaddr on reload >>>> >>>> [Oct 8 08:44:25] WARNING[1278] acl.c: is not a valid IP >>>> >>>> [Oct 8 08:44:25] WARNING[714] chan_sip.c: >>>> insecure=very at line 31 is deprecated; use >>>> insecure=port,invite instead >>>> >>>> [Oct 8 08:47:46] NOTICE[683] cdr.c: CDR simple logging >>>> enabled. >>>> >>>> [Oct 8 08:47:46] NOTICE[683] loader.c: 56 modules will >>>> be loaded. >>>> >>>> [Oct 8 08:47:46] WARNING[683] acl.c: is not a valid IP >>>> >>>> [Oct 8 08:47:46] WARNING[683] acl.c: Unable to lookup >>>> 'callcentric.com <http://callcentric.com>' >>>> >>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: No such >>>> host: callcentric.com <http://callcentric.com> >>>> >>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: Probably a >>>> DNS error for registration to >>>> 17772150287101(a)callcentric.com >>>> <mailto:17772150287101@callcentric.com>, trying >>>> REGISTER again (after 20 seconds) >>>> >>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>> Repeater Init 29626 >>>> >>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>> Repeater Init 29627 >>>> >>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal >>>> Repeater Init 1001 >>>> >>>> [Oct 8 08:47:47] WARNING[722] chan_usbradio.c: Loaded >>>> parameters from usbradio_tune_usb1001.conf for device >>>> usb1001 . >>>> >>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: >>>> Possibly stuck USB read channel. [usb1001] >>>> >>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: Nope, >>>> USB read channel [usb1001] wasn't stuck after all. >>>> >>>> [Oct 8 08:47:47] NOTICE[719] chan_simpleusb.c: >>>> Assigned USB device 5-2:1.0 to simpleusb channel usb29626 >>>> >>>> [Oct 8 08:47:47] WARNING[719] chan_simpleusb.c: Loaded >>>> parameters from simpleusb_tune_usb29626.conf for device >>>> usb29626 . >>>> >>>> [Oct 8 08:47:47] NOTICE[721] chan_usbradio.c: Assigned >>>> USB device 5-2:1.0 to usbradio channel usb29627 >>>> >>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Loaded >>>> parameters from usbradio_tune_usb29627.conf for device >>>> usb29627 . >>>> >>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Unable >>>> to re-open DSP device 2 (usb29627): Device or resource busy >>>> >>>> [Oct 8 08:48:06] NOTICE[714] chan_sip.c: -- >>>> Registration for '17772150287101(a)callcentric.com >>>> <mailto:17772150287101@callcentric.com>' timed out, >>>> trying again (Attempt #1) >>>> >>>> [Oct 8 08:59:15] NOTICE[673] cdr.c: CDR simple logging >>>> enabled. >>>> >>>> [Oct 8 08:59:15] NOTICE[673] loader.c: 57 modules will >>>> be loaded. >>>> >>>> [Oct 8 08:59:15] WARNING[673] acl.c: is not a valid IP >>>> >>>> [Oct 8 08:59:15] WARNING[673] acl.c: Unable to lookup >>>> 'callcentric.com <http://callcentric.com>' >>>> >>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: No such >>>> host: callcentric.com <http://callcentric.com> >>>> >>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: Probably a >>>> DNS error for registration to >>>> 17772150287101(a)callcentric.com >>>> <mailto:17772150287101@callcentric.com>, trying >>>> REGISTER again (after 20 seconds) >>>> >>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>> Repeater Init 29626 >>>> >>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>> Repeater Init 29627 >>>> >>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal >>>> Repeater Init 1001 >>>> >>>> [Oct 8 08:59:15] WARNING[718] chan_usbradio.c: Loaded >>>> parameters from usbradio_tune_usb29627.conf for device >>>> usb29627 . >>>> >>>> [Oct 8 08:59:15] WARNING[715] chan_usbradio.c: >>>> Possibly stuck USB read channel. [usb29627] >>>> >>>> [Oct 8 08:59:16] WARNING[715] chan_usbradio.c: Nope, >>>> USB read channel [usb29627] wasn't stuck after all. >>>> >>>> [Oct 8 08:59:16] NOTICE[719] chan_usbradio.c: Assigned >>>> USB device 5-2:1.0 to usbradio channel usb1001 >>>> >>>> [Oct 8 08:59:16] NOTICE[716] chan_simpleusb.c: >>>> Assigned USB device 5-2:1.0 to simpleusb channel usb29626 >>>> >>>> [Oct 8 08:59:16] WARNING[716] chan_simpleusb.c: Loaded >>>> parameters from simpleusb_tune_usb29626.conf for device >>>> usb29626 . >>>> >>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Loaded >>>> parameters from usbradio_tune_usb1001.conf for device >>>> usb1001 . >>>> >>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Unable >>>> to re-open DSP device 2 (usb1001): Device or resource busy >>>> >>>> [Oct 8 08:59:35] NOTICE[711] chan_sip.c: -- >>>> Registration for '17772150287101(a)callcentric.com >>>> <mailto:17772150287101@callcentric.com>' timed out, >>>> trying again (Attempt #1) >>>> >>>> >>>> >>>> >>>> >>>> - Is there something else to enable or a better app to >>>> use, for feeding to broadcastify? >>>> >>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)ohnosec.org >>>> <mailto:App_rpt-users@ohnosec.org> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>> >>> -- >>> "Anything is possible if you don't know what you are talking about." >>> 1st Law of Logic >>> >>> >> >> -- >> "Anything is possible if you don't know what you are talking about." >> 1st Law of Logic >> >> > > -- > "Anything is possible if you don't know what you are talking about." > 1st Law of Logic > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] DIAL with Broadcastify etc via ezstream
by Steve Zingman 08 Oct '15

08 Oct '15

Working as in streaming from the node or sending a audio file? On 10/08/2015 01:19 PM, Mark Johnston wrote: > it gave me a login error > > ezstream: Connection to http://audio3.broadcastify.com:80/wcms5pn74trz > failed: Login failed > > ezstream: Exiting ... > > > suddenly started working - not sure how/why though - > > > > "Got Root?" > > How many software engineers does it take to change a light bulb? > *None. It's a hardware problem.* > > > Unix is user friendly. It's just very particular about who it's > friends are. > WINDOWS: Will Install Needless Data On Whole System > MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools > Teenagers. > > > A ntennas > P oorly > P laced > L acks > E ngineering > > The best way to accelerate a computer running Windows is at 9.81 m/s². > > /*_/"I get paid to support Windows, I use Linux to get work done."/_*/ > > > On Thu, Oct 8, 2015 at 10:06 AM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > can you send a audio file to broadcastify with the command line > below? > > > On 10/08/2015 01:00 PM, Mark Johnston wrote: >> >> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s >> 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml >> >> >> This just started appearing >> >> >> [Oct 8 09:35:48] ERROR[695] app_rpt.c: pipe() failed! >> >> [Oct 8 09:35:50] ERROR[695] app_rpt.c: pipe() failed! >> >> [Oct 8 09:35:52] ERROR[695] app_rpt.c: pipe() failed! >> >> [Oct 8 09:35:54] ERROR[695] app_rpt.c: pipe() failed! >> >> [Oct 8 09:35:56] ERROR[695] app_rpt.c: pipe() failed! >> >> [Oct 8 09:35:58] ERROR[695] app_rpt.c: pipe() failed! >> >> >> "Got Root?" >> >> How many software engineers does it take to change a light bulb? >> *None. It's a hardware problem.* >> >> >> Unix is user friendly. It's just very particular about who it's >> friends are. >> WINDOWS: Will Install Needless Data On Whole System >> MICROSOFT: Most Intelligent Customers Realize Our Software Only >> Fools Teenagers. >> >> >> A ntennas >> P oorly >> P laced >> L acks >> E ngineering >> >> The best way to accelerate a computer running Windows is at 9.81 >> m/s². >> >> /*_/"I get paid to support Windows, I use Linux to get work >> done."/_*/ >> >> >> On Thu, Oct 8, 2015 at 9:55 AM, Steve Zingman >> <szingman(a)msgstor.com> wrote: >> >> Mark, >> Your log is showing problems with sip and possibly a sound fob. >> I don't think you need app_ices >> >> Please post you outstreamcmd in rpt.conf >> >> you may want to disable the sip changes while troubleshooting >> streaming. >> >> 73, Steve N4IRS >> >> >> >> On 10/08/2015 12:13 PM, Mark Johnston wrote: >>> Anyone try setting this up yet? >>> Used to use this with ACID just fine >>> Installed ezstream, and Lame - >>> >>> >>> shows it's running >>> >>> 1124 ? S 0:00 /bin/sh -c /usr/bin/lame --preset cbr >>> 16 -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc >>> /etc/ezstream1001.xml >>> >>> >>> I enabled this module, thinking thats what it needed >>> >>> load => app_ices.so ; Encode and Stream via >>> icecast and ices >>> >>> >>> >>> ;modules.conf >>> >>> autoload=no >>> >>> >>> ; Applications >>> >>> >>> noload => app_adsiprog.so ;Asterisk ADSI Programming >>> Application >>> >>> noload => app_alarmreceiver.so ;Alarm Receiver for Asterisk >>> >>> noload => app_amd.so ;Answering Machine Detection Application >>> >>> load => app_authenticate.so ; Authentication Application >>> >>> noload => app_cdr.so ;Tell Asterisk to not maintain a CDR for >>> >>> noload => app_chanisavail.so ;Check channel availability >>> >>> noload => app_channelredirect.so ;Channel Redirect >>> >>> load => app_chanspy.so ;Listen to the audio of an active >>> channel >>> >>> noload => app_controlplayback.so ;Control Playback Application >>> >>> noload => app_dahdibarge.so ;Barge in on channel application >>> >>> noload => app_dahdiras.so ;DAHDI RAS Application >>> >>> noload => app_dahdiscan.so ;Scan Zap channels application >>> >>> noload => app_db.so ;Database Access Functions >>> >>> load => app_dial.so ;Dialing Application >>> >>> noload => app_dictate.so ;Virtual Dictation Machine >>> >>> noload => app_directed_pickup.so ;Directed Call Pickup >>> Application >>> >>> noload => app_directory.so ;Extension Directory >>> >>> noload => app_disa.so ;DISA (Direct Inward System Access) Appli >>> >>> noload => app_dumpchan.so ;Dump Info About The Calling Channel >>> >>> noload => app_echo.so ;Simple Echo Application >>> >>> load => app_exec.so ;Executes dialplan applications >>> >>> noload => app_externalivr.so ;External IVR Interface >>> Application >>> >>> noload => app_festival.so ;Simple Festival Interface >>> >>> noload => app_flash.so ;Flash channel application >>> >>> noload => app_followme.so ;Find-Me/Follow-Me Application >>> >>> noload => app_forkcdr.so ;Fork The CDR into 2 separate entities >>> >>> noload => app_getcpeid.so ;Get ADSI CPE ID >>> >>> noload => app_gps.so ;GPS interface module >>> >>> noload => app_hasnewvoicemail.so ;Indicator for whether a >>> voice mailbox ha >>> >>> load => app_ices.so ;Encode and Stream via icecast and ices >>> >>> noload => app_image.so ;Image Transmission Application >>> >>> noload => app_lookupblacklist.so ;Look up Caller*ID >>> name/number from black >>> >>> noload => app_lookupcidname.so ;Look up CallerID Name from >>> local databas >>> >>> load => app_macro.so ;Extension Macros >>> >>> noload => app_meetme.so ;MeetMe conference bridge >>> >>> noload => app_milliwatt.so ;Digital Milliwatt (mu-law) Test >>> Applicat >>> >>> noload => app_mixmonitor.so ;Mixed Audio Monitoring Application >>> >>> noload => app_morsecode.so ;Morse code >>> >>> noload => app_mp3.so ;Silly MP3 Application >>> >>> noload => app_nbscat.so ;Silly NBS Stream Application >>> >>> noload => app_page.so ;Page Multiple Phones >>> >>> noload => app_parkandannounce.so ;Call Parking and Announce >>> Application >>> >>> load => app_playback.so ;Sound File Playback Application >>> >>> noload => app_privacy.so ;Require phone number to be >>> entered, if n >>> >>> noload => app_queue.so ;True Call Queueing >>> >>> noload => app_radbridge.so ;Radio Bridging interface module >>> >>> noload => app_random.so ;Random goto >>> >>> noload => app_readfile.so ;Stores output of file into a >>> variable >>> >>> noload => app_read.so ;Read Variable Application >>> >>> noload => app_realtime.so ;Realtime Data Lookup/Rewrite >>> >>> noload => app_record.so ;Trivial Record Application >>> >>> load => app_rpt.so ;Radio Repeater/Remote Base Application >>> >>> noload => app_sayunixtime.so ;Say time >>> >>> load => app_senddtmf.so ;Send DTMF digits Application >>> >>> noload => app_sendtext.so ;Send Text Applications >>> >>> noload => app_setcallerid.so ;Set CallerID Application >>> >>> noload => app_setcdruserfield.so ;CDR user field apps >>> >>> noload => app_settransfercapability.so ;Set ISDN Transfer >>> Capability >>> >>> noload => app_sms.so ;SMS/PSTN handler >>> >>> noload => app_softhangup.so ;Hangs up the requested channel >>> >>> noload => app_speech_utils.so ;Dialplan Speech Applications >>> >>> noload => app_stack.so ;Stack Routines >>> >>> load => app_system.so ;Generic System() application >>> >>> noload => app_talkdetect.so ;Playback with Talk Detection >>> >>> noload => app_test.so ;Interface Test Application >>> >>> load => app_transfer.so ;Transfer >>> >>> noload => app_url.so ;Send URL Applications >>> >>> noload => app_userevent.so ;Custom User Event Application >>> >>> noload => app_verbose.so ;Send verbose output >>> >>> noload => app_voicemail.so ;Comedian Mail (Voicemail System) >>> >>> noload => app_waitforring.so ;Waits until first ring after time >>> >>> noload => app_waitforsilence.so ;Wait For Silence >>> >>> noload => app_while.so ;While Loops and Conditional Execution >>> >>> noload => app_zapateller.so ;Block Telemarketers with >>> Special Informa >>> >>> >>> ; CDR >>> >>> >>> noload => cdr_csv.so ;Comma Separated Values CDR Backend >>> >>> noload => cdr_custom.so ;Customizable Comma Separated Values >>> CDR >>> >>> noload => cdr_manager.so ;Asterisk Manager Interface CDR >>> Backend >>> >>> >>> ; Channels >>> >>> >>> noload => chan_agent.so ;Agent Proxy Channel >>> >>> noload => chan_alsa.so ;ALSA Console Channel Driver >>> >>> noload => chan_beagle.so ;Beagleboard Radio Interface >>> Channel Driver >>> >>> load => chan_dahdi.so ;DAHDI Telephony >>> >>> noload => chan_echolink.so ;echolink channel driver >>> >>> noload => chan_features.so ;Feature Proxy Channel >>> >>> noload => chan_gtalk.so ;Gtalk Channel Driver >>> >>> load => chan_iax2.so ;Inter Asterisk eXchange (Ver 2) >>> >>> load => chan_local.so ;Local Proxy Channel (Note: used internal >>> >>> noload => chan_oss.so ; >>> >>> noload => chan_phone.so ; >>> >>> load => chan_simpleusb.so ;Simple USB Radio Interface >>> Channel Drive >>> >>> load => chan_sip.so ;Session Initiation Protocol (SIP) >>> >>> noload => chan_tlb.so ;TheLinkBox channel driver >>> >>> load => chan_usbradio.so ;USB Console Channel Driver >>> >>> noload => chan_usrp.so ;USRP Channel Module >>> >>> noload => chan_voter.so ;radio Voter channel driver >>> >>> >>> ; Codecs >>> >>> >>> ; CODEC AUDIO QUALITY BANDWIDTH (including IP and >>> Ethernet headers) >>> >>> ; ULAW best 87 kilobits per second (kbps) >>> >>> ; ADPCM good 55 kbps >>> >>> ; GSM mediocre 36 kbps >>> >>> ; g726aal2 >>> >>> ; ilbc >>> >>> >>> load => codec_adpcm.so ;Adaptive Differential PCM Coder/Decoder >>> >>> load => codec_alaw.so ;A-law Coder/Decoder >>> >>> load => codec_a_mu.so ;A-law and Mulaw direct Coder/Decoder >>> >>> noload => codec_dahdi.so ;Generic DAHDI Transcoder Codec >>> Translato >>> >>> load => codec_g726.so ;ITU G.726-32kbps G726 Transcoder >>> >>> load => codec_gsm.so ;GSM Coder/Decoder >>> >>> load => codec_ulaw.so ;mu-Law Coder/Decoder >>> >>> noload => codec_ilbc.so >>> ;http://en.wikipedia.org/wiki/Internet_Low_Bitrate_Codec >>> >>> >>> ; Formats >>> >>> >>> load => format_g723.so ;G.723.1 Simple Timestamp File Format >>> >>> load => format_g726.so ;Raw G.726 (16/24/32/40kbps) data >>> >>> load => format_g729.so ;Raw G729 data >>> >>> load => format_gsm.so ;Raw GSM data >>> >>> load => format_h263.so ;Raw H.263 data >>> >>> load => format_h264.so ;Raw H.264 data >>> >>> load => format_ilbc.so ;Raw iLBC data >>> >>> noload => format_jpeg.so ;JPEG (Joint Picture Experts Group) >>> Image >>> >>> load => format_pcm.so ;Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G. >>> >>> load => format_sln.so ;Raw Signed Linear Audio support (SLN) >>> >>> load => format_vox.so ;Dialogic VOX (ADPCM) File Format >>> >>> load => format_wav_gsm.so ;Microsoft WAV format (Proprietary >>> GSM) >>> >>> load => format_wav.so ;Microsoft WAV format (8000Hz Signed Line >>> >>> >>> ; Functions >>> >>> >>> load => func_base64.so ;base64 encode/decode dialplan functions >>> >>> load => func_callerid.so ;Caller ID related dialplan function >>> >>> load => func_cdr.so ;CDR dialplan function >>> >>> load => func_channel.so ;Channel information dialplan function >>> >>> load => func_curl.so ;Load external URL >>> >>> load => func_cut.so ;Cut out information from a string >>> >>> load => func_db.so ;Database (astdb) related dialplan functi >>> >>> load => func_enum.so ;ENUM related dialplan functions >>> >>> load => func_env.so ;Environment/filesystem dialplan function >>> >>> load => func_global.so ;Global variable dialplan functions >>> >>> load => func_groupcount.so ;Channel group dialplan functions >>> >>> load => func_language.so ;Channel language dialplan function >>> >>> load => func_logic.so ;Logical dialplan functions >>> >>> load => func_math.so ;Mathematical dialplan function >>> >>> load => func_md5.so ;MD5 digest dialplan functions >>> >>> load => func_moh.so ;Music-on-hold dialplan function >>> >>> load => func_rand.so ;Random number dialplan function >>> >>> load => func_realtime.so ;Read/Write values from a RealTime >>> reposi >>> >>> noload => func_sha1.so ;SHA-1 computation dialplan function >>> >>> noload => func_strings.so ;String handling dialplan functions >>> >>> noload => func_timeout.so ;Channel timeout dialplan functions >>> >>> noload => func_uri.so ;URI encode/decode dialplan functions >>> >>> >>> ; PBX >>> >>> >>> noload => pbx_ael.so ;Asterisk Extension Language Compiler >>> >>> load => pbx_config.so ;Text Extension Configuration >>> >>> noload => pbx_dundi.so ;Distributed Universal Number >>> Discovery ( >>> >>> noload => pbx_loopback.so ;Loopback Switch >>> >>> noload => pbx_realtime.so ;Realtime Switch >>> >>> noload => pbx_spool.so ;Outgoing Spool Support >>> >>> >>> ; Resources >>> >>> >>> load => res_adsi.so ;ADSI Resource >>> >>> noload => res_agi.so ;Asterisk Gateway Interface (AGI) >>> >>> noload => res_clioriginate.so ;Call origination from the CLI >>> >>> noload => res_convert.so ;File format conversion CLI command >>> >>> noload => res_crypto.so ;Cryptographic Digital Signatures >>> >>> load => res_features.so ;Call Features Resource >>> >>> load => res_indications.so ;Indications Resource >>> >>> noload => res_jabber.so ;AJI - Asterisk Jabber Interface >>> >>> noload => res_monitor.so ;Call Monitoring Resource >>> >>> noload => res_musiconhold.so ;Music On Hold Resource >>> >>> noload => res_smdi.so ;Simplified Message Desk Interface (SMDI) >>> >>> noload => res_snmp.so ;SNMP [Sub]Agent for Asterisk >>> >>> noload => res_speech.so ;Generic Speech Recognition API >>> >>> >>> [global] >>> >>> >>> >>> >>> /var/log/asterisk/messages; >>> >>> [Oct 8 08:44:24] NOTICE[1278] cdr.c: CDR simple logging >>> enabled. >>> >>> [Oct 8 08:44:24] NOTICE[1278] indications.c: Removed >>> default indication country 'us' >>> >>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring >>> switchtype >>> >>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring >>> signalling >>> >>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c: Ignoring rxwink >>> >>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring >>> bindport on reload >>> >>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c: Ignoring >>> bindaddr on reload >>> >>> [Oct 8 08:44:25] WARNING[1278] acl.c: is not a valid IP >>> >>> [Oct 8 08:44:25] WARNING[714] chan_sip.c: insecure=very at >>> line 31 is deprecated; use insecure=port,invite instead >>> >>> [Oct 8 08:47:46] NOTICE[683] cdr.c: CDR simple logging enabled. >>> >>> [Oct 8 08:47:46] NOTICE[683] loader.c: 56 modules will be >>> loaded. >>> >>> [Oct 8 08:47:46] WARNING[683] acl.c: is not a valid IP >>> >>> [Oct 8 08:47:46] WARNING[683] acl.c: Unable to lookup >>> 'callcentric.com <http://callcentric.com>' >>> >>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: No such host: >>> callcentric.com <http://callcentric.com> >>> >>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: Probably a DNS >>> error for registration to 17772150287101(a)callcentric.com, >>> trying REGISTER again (after 20 seconds) >>> >>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater >>> Init 29626 >>> >>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater >>> Init 29627 >>> >>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal Repeater >>> Init 1001 >>> >>> [Oct 8 08:47:47] WARNING[722] chan_usbradio.c: Loaded >>> parameters from usbradio_tune_usb1001.conf for device usb1001 . >>> >>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: Possibly >>> stuck USB read channel. [usb1001] >>> >>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c: Nope, USB >>> read channel [usb1001] wasn't stuck after all. >>> >>> [Oct 8 08:47:47] NOTICE[719] chan_simpleusb.c: Assigned USB >>> device 5-2:1.0 to simpleusb channel usb29626 >>> >>> [Oct 8 08:47:47] WARNING[719] chan_simpleusb.c: Loaded >>> parameters from simpleusb_tune_usb29626.conf for device >>> usb29626 . >>> >>> [Oct 8 08:47:47] NOTICE[721] chan_usbradio.c: Assigned USB >>> device 5-2:1.0 to usbradio channel usb29627 >>> >>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Loaded >>> parameters from usbradio_tune_usb29627.conf for device >>> usb29627 . >>> >>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c: Unable to >>> re-open DSP device 2 (usb29627): Device or resource busy >>> >>> [Oct 8 08:48:06] NOTICE[714] chan_sip.c: -- Registration >>> for '17772150287101(a)callcentric.com' timed out, trying again >>> (Attempt #1) >>> >>> [Oct 8 08:59:15] NOTICE[673] cdr.c: CDR simple logging enabled. >>> >>> [Oct 8 08:59:15] NOTICE[673] loader.c: 57 modules will be >>> loaded. >>> >>> [Oct 8 08:59:15] WARNING[673] acl.c: is not a valid IP >>> >>> [Oct 8 08:59:15] WARNING[673] acl.c: Unable to lookup >>> 'callcentric.com <http://callcentric.com>' >>> >>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: No such host: >>> callcentric.com <http://callcentric.com> >>> >>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: Probably a DNS >>> error for registration to 17772150287101(a)callcentric.com, >>> trying REGISTER again (after 20 seconds) >>> >>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater >>> Init 29626 >>> >>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater >>> Init 29627 >>> >>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal Repeater >>> Init 1001 >>> >>> [Oct 8 08:59:15] WARNING[718] chan_usbradio.c: Loaded >>> parameters from usbradio_tune_usb29627.conf for device >>> usb29627 . >>> >>> [Oct 8 08:59:15] WARNING[715] chan_usbradio.c: Possibly >>> stuck USB read channel. [usb29627] >>> >>> [Oct 8 08:59:16] WARNING[715] chan_usbradio.c: Nope, USB >>> read channel [usb29627] wasn't stuck after all. >>> >>> [Oct 8 08:59:16] NOTICE[719] chan_usbradio.c: Assigned USB >>> device 5-2:1.0 to usbradio channel usb1001 >>> >>> [Oct 8 08:59:16] NOTICE[716] chan_simpleusb.c: Assigned USB >>> device 5-2:1.0 to simpleusb channel usb29626 >>> >>> [Oct 8 08:59:16] WARNING[716] chan_simpleusb.c: Loaded >>> parameters from simpleusb_tune_usb29626.conf for device >>> usb29626 . >>> >>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Loaded >>> parameters from usbradio_tune_usb1001.conf for device usb1001 . >>> >>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c: Unable to >>> re-open DSP device 2 (usb1001): Device or resource busy >>> >>> [Oct 8 08:59:35] NOTICE[711] chan_sip.c: -- Registration >>> for '17772150287101(a)callcentric.com' timed out, trying again >>> (Attempt #1) >>> >>> >>> >>> >>> >>> - Is there something else to enable or a better app to use, >>> for feeding to broadcastify? >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> -- >> "Anything is possible if you don't know what you are talking about." >> 1st Law of Logic >> >> > > -- > "Anything is possible if you don't know what you are talking about." > 1st Law of Logic > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0