- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] mikrotik and Allstar registration problem
by Tim Sawyer 04 Sep '15

04 Sep '15

Posting this again because the list didn't take my attachment. If you want to see the screenshot contact me off list. In the mean time here's the command line way to do it: ip firewall nat add action=masquerade chain=srcnat comment="HairPin NAT" out-interface=ether1-WAN src-address=192.168.1.0/24 add action=dst-nat chain=dstnat comment="Asterisk AIX" dst-port=4569 in-interface=ether1-WAN protocol=udp to-addresses=\ 192.168.1.6 to-ports=4569 --------- There is a little thing to know about MikroTik routers and AllStar registration. It took me a long time to sort this out and I almost gave up on MikroTik. But don't despair they are really good routers. You have to have both the out-interface and the in-interface set properly on the masquerade rule. If you forget the out interface the AllStar registration packets go to all interfaces. That really confuses Asterisk if you have AllStar on more then one interface. On Thu, Sep 3, 2015 at 7:29 PM, Tim Sawyer <tisawyer(a)gmail.com> wrote: > There is a little thing to know about MikroTik routers and AllStar > registration. It took me a long time to sort this out and I almost gave up > on MikroTik. But don't despair they are really good routers. > > You have to have both the out-interface and the in-interface set properly > on the masquerade rule. If you forget the out interface the AllStar > registration packets go to all interfaces. That really confuses Asterisk if > you have AllStar on more then one interface. > > Let me know if the attached screen shot doesn't come through. > > On Thu, Sep 3, 2015 at 3:32 PM, Jesse Lloyd <ve7lyd(a)gmail.com> wrote: > >> Maybe it's not marking UDP packets? All the other protocols you listed >> are TCP. If you want to test another UDP protocol maybe try TFTP. The >> server side will tell you what IP has hit it. >> >> Jesse >> >> On Sep 3, 2015, at 2:43 PM, R Dahl <ve6ars(a)gmail.com> wrote: >> >> Well, I have to admit, I wasn't sure whether this was the right forum >> either. My network has 3 flaky wifi wan's and the routing mark/distance >> settings have allowed for a simple failover system. routing marks are >> applied by the firewall based on ip's and works great for everything but >> the connection from the allstar server to the rtcm or registration server. >> Other connections from the allstar server work corrrectly and honor the >> marks, (ssh, telnet, http, etc...) >> All this leads me to believe there is something different about the >> allstar arrangement that I haven't clued into. I also tried applying the >> routing marks based on mac but no luck there either. Perhaps port and >> protocol as well? As you suggest, I will try a mikrotik group >> Thanks, >> Ross. >> >> On Thu, Sep 3, 2015 at 1:47 PM, David McGough <kb4fxc(a)inttek.net> wrote: >> >>> >>> Hi Ross, >>> >>> From what you describe, this isn't an Asterisk/AllStar problem at >>> all--your router is load balancing across multiple Internet (WAN) >>> connections. >>> >>> You need to add a source route for the IP address of your Asterisk server >>> that guarantees that your router always uses the proper WAN connection >>> for >>> this host. >>> >>> I recommend finding a -local- MikroTik network guru. The problem with >>> working on this kind of stuff remotely is that, with one accidental >>> misstep, you're down and they can't get back in. Oops! >>> >>> 73, David KB4FXC >>> >>> >>> On Thu, 3 Sep 2015, R Dahl wrote: >>> >>> > I have an Acid (40526) server with an rtcm for radio connection. The >>> > mikrotik router has 3 wan connections with the acid server connected >>> to its >>> > lan ports as well as the rtcm. My problem is that the registration >>> > requests appear to go out an arbitrary wan port rather than the one I >>> want >>> > it to use. >>> > I try to force it to use a particular wan by assigning a routing mark >>> based >>> > on its ip and then have the desired wan with the same routing mark. >>> This >>> > approach works for splitting workstations and servers among the wan's >>> but >>> > the asterisk registration process ignores it. >>> > >>> > iax2 registration shows it as perceived as one of the other wans and >>> is not >>> > consistent. >>> > traceroute from asterisk server shows it using the desired wan. >>> > >>> > >>> > This is all mostly over my payscale. >>> > >>> > Ross >>> > >>> >>> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >> down to the bottom of the page. Enter your email address and press the >> "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >> down to the bottom of the page. Enter your email address and press the >> "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > > > -- > -- > Tim > -- -- Tim

2 1

Re: [App_rpt-users] Stuck Tx on System
by Jesse Lloyd 03 Sep '15

03 Sep '15

K I'll try that. The Tx LED was on on the RTCM. Jesse > On Sep 3, 2015, at 7:39 PM, Tim Sawyer <tisawyer(a)gmail.com> wrote: > > Do a menu 98 in the RTCM telnet console while PTT is locked. Is the PTT asserted? > >> On Thu, Sep 3, 2015 at 6:55 PM, Jesse Lloyd <ve7lyd(a)gmail.com> wrote: >> Solid state meaning no spinner hard drive, that's all. >> >> Jesse >> >>> On Sep 3, 2015, at 5:57 PM, ronald simpson <n6gkj1(a)gmail.com> wrote: >>> >>> OK ... I always assume that ALL modern personal computers in the public domain are SOLID STATE.... >>> >>>> On Sep 3, 2015 5:56 PM, "ronald simpson" <n6gkj1(a)gmail.com> wrote: >>>> OK maybe an industrial "tube type" non-fanless x86 PC >>>> >>>>> On Sep 3, 2015 5:47 PM, "Jesse Lloyd" <ve7lyd(a)gmail.com> wrote: >>>>> Lol, no it's a new MSI industrial solid state fanless PC. Designed for use in industrial control settings or vehicular use. >>>>> >>>>> Jesse >>>>> >>>>>> On Sep 3, 2015, at 5:40 PM, ronald simpson <n6gkj1(a)gmail.com> wrote: >>>>>> >>>>>> Maybe a "tube type" x86 pc?? >>>>>> >>>>>>> On Sep 3, 2015 3:29 PM, "Jesse Lloyd" <ve7lyd(a)gmail.com> wrote: >>>>>>> Ya this is running on solid state x86 PC. I dug around the list a little and I'll have to do a rpt dump and see what's hanging it up, app-rpt or app-voter >>>>>>> >>>>>>> I had this happen twice while I was in the asterisk console using voter display, maybe voter display has a bug that causes this, not sure. >>>>>>> >>>>>>> Thx, >>>>>>> >>>>>>> Jesse >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On Sep 3, 2015, at 3:15 PM, "kk6ecm" <kk6ecm(a)gmail.com> wrote: >>>>>>>> >>>>>>>> Not sure it's you issue, but I had the same experience on a Beagleboard-xM; kept rebooting, which would last awhile. I finally reseated the microSD memory card, and have not had an issue for many months now. the xM runs on the microSD card. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Thanks, >>>>>>>> >>>>>>>> Bob >>>>>>>> >>>>>>>> kk6ecm >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jesse Lloyd >>>>>>>> Sent: Thursday, September 03, 2015 10:58 AM >>>>>>>> To: app_rpt >>>>>>>> Subject: [App_rpt-users] Stuck Tx on System >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Hi All, >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Any thoughts on how I should troubleshoot this? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Thx, >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Jesse >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> App_rpt-users mailing list >>>>>>>> App_rpt-users(a)ohnosec.org >>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>>> >>>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>>>>> >>>>>>> _______________________________________________ >>>>>>> App_rpt-users mailing list >>>>>>> App_rpt-users(a)ohnosec.org >>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>>> >>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > > -- > -- > Tim

1 0

Re: [App_rpt-users] Stuck Tx on System
by Jesse Lloyd 03 Sep '15

03 Sep '15

Solid state meaning no spinner hard drive, that's all. Jesse > On Sep 3, 2015, at 5:57 PM, ronald simpson <n6gkj1(a)gmail.com> wrote: > > OK ... I always assume that ALL modern personal computers in the public domain are SOLID STATE.... > >> On Sep 3, 2015 5:56 PM, "ronald simpson" <n6gkj1(a)gmail.com> wrote: >> OK maybe an industrial "tube type" non-fanless x86 PC >> >>> On Sep 3, 2015 5:47 PM, "Jesse Lloyd" <ve7lyd(a)gmail.com> wrote: >>> Lol, no it's a new MSI industrial solid state fanless PC. Designed for use in industrial control settings or vehicular use. >>> >>> Jesse >>> >>>> On Sep 3, 2015, at 5:40 PM, ronald simpson <n6gkj1(a)gmail.com> wrote: >>>> >>>> Maybe a "tube type" x86 pc?? >>>> >>>>> On Sep 3, 2015 3:29 PM, "Jesse Lloyd" <ve7lyd(a)gmail.com> wrote: >>>>> Ya this is running on solid state x86 PC. I dug around the list a little and I'll have to do a rpt dump and see what's hanging it up, app-rpt or app-voter >>>>> >>>>> I had this happen twice while I was in the asterisk console using voter display, maybe voter display has a bug that causes this, not sure. >>>>> >>>>> Thx, >>>>> >>>>> Jesse >>>>> >>>>> >>>>> >>>>>> On Sep 3, 2015, at 3:15 PM, "kk6ecm" <kk6ecm(a)gmail.com> wrote: >>>>>> >>>>>> Not sure it's you issue, but I had the same experience on a Beagleboard-xM; kept rebooting, which would last awhile. I finally reseated the microSD memory card, and have not had an issue for many months now. the xM runs on the microSD card. >>>>>> >>>>>> >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Bob >>>>>> >>>>>> kk6ecm >>>>>> >>>>>> >>>>>> >>>>>> From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jesse Lloyd >>>>>> Sent: Thursday, September 03, 2015 10:58 AM >>>>>> To: app_rpt >>>>>> Subject: [App_rpt-users] Stuck Tx on System >>>>>> >>>>>> >>>>>> >>>>>> Hi All, >>>>>> >>>>>> >>>>>> >>>>>> I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition. >>>>>> >>>>>> >>>>>> >>>>>> Any thoughts on how I should troubleshoot this? >>>>>> >>>>>> >>>>>> >>>>>> Thx, >>>>>> >>>>>> >>>>>> >>>>>> Jesse >>>>>> >>>>>> _______________________________________________ >>>>>> App_rpt-users mailing list >>>>>> App_rpt-users(a)ohnosec.org >>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>> >>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)ohnosec.org >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Fwd: remote base
by Erik Cohee 03 Sep '15

03 Sep '15

I'm using remote base and seems that when I key up with my HT the remote base transmits and then receives, transits and then receives. I think it's in the settings, but I don't know. For the radio im using a tyt-9000. Does anyone have this problem?? Thanks Erik Kc9wry ---------- Forwarded message ---------- From: "Jesse Lloyd" <ve7lyd(a)gmail.com> Date: Sep 3, 2015 1:58 PM Subject: [App_rpt-users] Stuck Tx on System To: "app_rpt" <app_rpt-users(a)ohnosec.org> Cc: Hi All, I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition. Any thoughts on how I should troubleshoot this? Thx, Jesse _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Re: [App_rpt-users] Stuck Tx on System
by Jesse Lloyd 03 Sep '15

03 Sep '15

Lol, no it's a new MSI industrial solid state fanless PC. Designed for use in industrial control settings or vehicular use. Jesse > On Sep 3, 2015, at 5:40 PM, ronald simpson <n6gkj1(a)gmail.com> wrote: > > Maybe a "tube type" x86 pc?? > >> On Sep 3, 2015 3:29 PM, "Jesse Lloyd" <ve7lyd(a)gmail.com> wrote: >> Ya this is running on solid state x86 PC. I dug around the list a little and I'll have to do a rpt dump and see what's hanging it up, app-rpt or app-voter >> >> I had this happen twice while I was in the asterisk console using voter display, maybe voter display has a bug that causes this, not sure. >> >> Thx, >> >> Jesse >> >> >> >>> On Sep 3, 2015, at 3:15 PM, "kk6ecm" <kk6ecm(a)gmail.com> wrote: >>> >>> Not sure it's you issue, but I had the same experience on a Beagleboard-xM; kept rebooting, which would last awhile. I finally reseated the microSD memory card, and have not had an issue for many months now. the xM runs on the microSD card. >>> >>> >>> >>> Thanks, >>> >>> Bob >>> >>> kk6ecm >>> >>> >>> >>> From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jesse Lloyd >>> Sent: Thursday, September 03, 2015 10:58 AM >>> To: app_rpt >>> Subject: [App_rpt-users] Stuck Tx on System >>> >>> >>> >>> Hi All, >>> >>> >>> >>> I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition. >>> >>> >>> >>> Any thoughts on how I should troubleshoot this? >>> >>> >>> >>> Thx, >>> >>> >>> >>> Jesse >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

mikrotik and Allstar registration problem
by R Dahl 03 Sep '15

03 Sep '15

I have an Acid (40526) server with an rtcm for radio connection. The mikrotik router has 3 wan connections with the acid server connected to its lan ports as well as the rtcm. My problem is that the registration requests appear to go out an arbitrary wan port rather than the one I want it to use. I try to force it to use a particular wan by assigning a routing mark based on its ip and then have the desired wan with the same routing mark. This approach works for splitting workstations and servers among the wan's but the asterisk registration process ignores it. iax2 registration shows it as perceived as one of the other wans and is not consistent. traceroute from asterisk server shows it using the desired wan. This is all mostly over my payscale. Ross

3 3

Stuck Tx on System
by Jesse Lloyd 03 Sep '15

03 Sep '15

Hi All, I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition. Any thoughts on how I should troubleshoot this? Thx, Jesse

2 2

RTCM Debug Levels
by Jesse Lloyd 03 Sep '15

03 Sep '15

Hey All, Does anyone have a document or a link that shows what the various debug levels are for a RTCM? Thanks, Jesse

1 0

Crackle
by Robert Newberry 03 Sep '15

03 Sep '15

On both my acid installations I have a crackle on the tail. I noticed this first on my first installation using usbradio. I have since installed a second node on a different repeater using usbradio and hear this same crackle. I have a third node using simpleusb and do not hear this crackle The only reason I think usbradio it's heard on the tail almost like the squelch trying to adjust itself to compensate for a static burst. Has anyone ever heard this before? Maybe I'm all wet with my usbradio theory. It never bothered me but a few people have noticed it too so I figured I would ask. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086

1 0

RTCM Host LED Flashing
by Jesse Lloyd 03 Sep '15

03 Sep '15

Hey All, I have 4 RTCM's setup, two are T/R sites (sites 1&2) and two are Rx only sites (sites 3&4) (Site 1 is the primary site). The systems been running for about 2 months now and one day we noticed that we lost the Tx side of site 2. The Host LED was flashing when we got there to troubleshoot, so we unplugging and re-plugging the network cable (causing the RTCM to reboot) which fixed the issue. Wondering what I can do to troubleshoot/debug this, and what are the conditions that cause the Host LED to flash? Thanks, Jesse

1 0