- App_rpt-users - lists.keekles.org

resending request for app info
by Reid Brandon 14 Aug '15

14 Aug '15

Not sure why this wasn't posted before so resending it:After discovering there is no pop-up window during CENT-OS installation to allow selection of a fixed IP address (it installs then looks for DHCP, which isn't there so the installation check crashes, I found I can make a Firewall perform DHCP as it also acts as a router. And I have a licensed FW available so now the person who is setting up the Firewall box asked me a few questions.Keep in mind this is way out of my field of experience! But I need a list of apps that need permission to pass thru the FW. I saw SSH in a non-std software port, SIP (session initiation protocol) What else - any Gurus out there that have btdt?TIA, Reid W6MTF

3 2

Known Bugs with Pickle and Beagle xM
by John C. Westmoreland, P.E. 13 Aug '15

13 Aug '15

Hello All, Can someone point me to the known bug list with Pickle and the Beagle Board xM? Thanks, John

3 3

what Firewall apps needed?
by Reid Brandon 13 Aug '15

13 Aug '15

After discovering there is no pop-up window during CENT-OS installation to allow selection of a fixed IP address (it installs then looks for DHCP, which isn't there so the installation check crashes, I found I can make a Firewall perform DHCP as it also acts as a router. And I have a licensed FW available so now the person who is setting up the Firewall box asked me a few questions.Keep in mind this is way out of my field of experience! But I need a list of apps that need permission to pass thru the FW. I saw SSH in a non-std software port, SIP (session initiation protocol) What else - any Gurus out there that have btdt?TIA, Reid W6MTF

1 0

Data Center Asterisk server crashes randomly
by Loren Tedford 13 Aug '15

13 Aug '15

Hey I have been experiancing a random crash every once in awhile with my data center hub I check var/logs/messages and this is the info i get.. The crash happened around 5am I later put the server online at 12:17pm.. By the way i fixed the speexs messages i just took them out of my iax.conf file but not sure what to think on the whole echolink issue.. Here is a sample of logs if some one can figure this out for me.. [Aug 11 19:58:12] NOTICE[2148] app_rpt.c: Normal Repeater Init 41834 [Aug 12 10:51:01] ERROR[2168] chan_echolink.c: Cannot find DB entry for IP addr 70.89.232.161 [Aug 12 10:51:01] ERROR[2168] chan_echolink.c: Cannot find DB entry for IP addr 70.89.232.161 [Aug 12 11:07:45] WARNING[2188] chan_echolink.c: countdown for W9MAT(70.89.232.161) negative [Aug 13 05:41:13] ERROR[2169] chan_echolink.c: Error in directory download on server1.echolink.org [Aug 13 05:41:35] ERROR[2169] chan_echolink.c: Error in directory download on servers.echolink.org [Aug 13 05:41:55] ERROR[2169] chan_echolink.c: Error in directory download on nawest.echolink.org [Aug 13 05:42:21] ERROR[2169] chan_echolink.c: Error in directory download on server1.echolink.org [Aug 13 05:43:19] ERROR[2169] chan_echolink.c: Error in directory download on servers.echolink.org [Aug 13 05:43:37] ERROR[2169] chan_echolink.c: Error in directory download on nawest.echolink.org [Aug 13 05:43:43] ERROR[2169] chan_echolink.c: Error in directory download on server1.echolink.org [Aug 13 05:44:29] ERROR[2169] chan_echolink.c: Error in directory download on servers.echolink.org [Aug 13 12:17:51] NOTICE[5888] cdr.c: CDR simple logging enabled. [Aug 13 12:17:51] NOTICE[5888] loader.c: 55 modules will be loaded. [Aug 13 12:17:51] WARNING[5888] loader.c: Error loading module 'chan_features.so': /usr/lib/asterisk/modules/chan$ [Aug 13 12:17:51] WARNING[5888] loader.c: Error loading module 'codec_ilbc.so': /usr/lib/asterisk/modules/codec_i$ [Aug 13 12:17:51] WARNING[5888] loader.c: Error loading module 'chan_features.so': /usr/lib/asterisk/modules/chan$ [Aug 13 12:17:51] WARNING[5888] loader.c: Module 'chan_features.so' could not be loaded. [Aug 13 12:17:51] WARNING[5888] chan_iax2.c: Unable to open IAX timing interface: No such file or directory [Aug 13 12:17:51] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 8k' [Aug 13 12:17:51] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 16k' [Aug 13 12:17:52] WARNING[5888] acl.c: is not a valid IP [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 8k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 16k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 8k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 16k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 8k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 16k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 8k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 16k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 8k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 16k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 8k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 16k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 8k' [Aug 13 12:17:52] WARNING[5888] frame.c: Cannot allow unknown format 'Speex 16k' [Aug 13 12:17:52] ERROR[5888] codec_dahdi.c: Failed to open /dev/dahdi/transcode: No such file or directory [Aug 13 12:17:52] WARNING[5888] loader.c: Error loading module 'codec_ilbc.so': /usr/lib/asterisk/modules/codec_i$ [Aug 13 12:17:52] WARNING[5888] loader.c: Module 'codec_ilbc.so' could not be loaded. [Aug 13 12:17:52] NOTICE[5895] app_rpt.c: Normal Repeater Init 41715 [Aug 13 12:17:52] NOTICE[5895] app_rpt.c: Normal Repeater Init 41834 Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

1 0

URIx failures with uridiag
by John C. Westmoreland, P.E. 13 Aug '15

13 Aug '15

Hello All, I am seeing some failures with uridiag - I hope some of you can tell me what you think is wrong - root@(none):~/trunk# ./uridiag URIDiag, diagnostic program for the DMK Engineering URI USB Radio Interface, version 0.8, 04/26/11 Found CM119 USB Radio Interface at 001/004 Menu: For Left Channel: 1 - 1004Hz, 2 - 204Hz, 3 - 300Hz, 4 - 404Hz, 5 - 502Hz 6 - 1502Hz, 7 - 2004Hz, 8 - 3004Hz, 9 - 5004Hz For Right Channel: 11 - 1004Hz, 22 - 204Hz, 33 - 300Hz, 44 - 404Hz, 55 - 502Hz 66 - 1502Hz, 77 - 2004Hz, 88 - 3004Hz, 99 - 5004Hz Tests, etc. t - test normal operation (use uppercase 'T' for verbose output) i - test digital signals only (COR,TONE,PTT,GPIO) e - test EEPROM, E - Initialize EEPROM l - list EEPROM contents c - show test (loopback) connector pinout q,x - exit program Enter your selection:T Testing digital I/O (PTT,COR,TONE and GPIO).... Digital I/O passed!! Testing Analog at 204 (and 700) Hz... Analog level on left channel for 204.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 504 (and 700) Hz... ... 24 Error(s) found during test(s)!!!! So, have I blown out the audio in (MIC_IN) signal path? 73's, John AJ6BC

1 0

Fwd: Is there a way to convert digital to analog?
by Loren Tedford 12 Aug '15

12 Aug '15

Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com ---------- Forwarded message ---------- From: Loren Tedford <lorentedford(a)gmail.com> Date: Wed, Aug 12, 2015 at 6:15 PM Subject: Re: [App_rpt-users] Is there a way to convert digital to analog? To: Sione Ragle <ke6sth(a)ke6sth.ampr.org> This here is an audio sample of what came across the repeater today. Im not sure what type of mode this is.. http://hub.kc9zhv.com/audio/41715/20150812161839.WAV Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com On Wed, Aug 12, 2015 at 6:01 PM, Sione Ragle <ke6sth(a)ke6sth.ampr.org> wrote: > > Does this happen often? I some times have their APRS turned on VFO they > the switch to a repeater which some times cause the packet burst to go over > the repeater. > > There is a web site that has audio samples of all sorts of digital modes > http://www.kb9ukd.com/digital/ > > That could help you identify what kind of digital noise you heard. > > > On 8/12/2015 3:50 PM, Loren Tedford wrote: > > not sure which version of digital it was but they passed it through the > system and i have no idea what anyone said. > > And Im the repeater owner lol.. > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com > Phone: 618-553-0806 > <http://www.lorentedford.com/>http://www.lorentedford.com > <http://www.kc9zhv.com>http://www.kc9zhv.com > <http://hub.kc9zhv.com>http://hub.kc9zhv.com > > On Wed, Aug 12, 2015 at 5:37 PM, Sione Ragle <ke6sth(a)ke6sth.ampr.org> > wrote: > >> What digital mode is it being pass through? I can see this happening with >> AX.25 when someone has PL set, but for digital voice they don't use PL so >> if your repeater is using PL digital voice should not be passed thru the >> repeater. >> >> >> On 8/12/2015 2:24 PM, Loren Tedford wrote: >> >> Lets say some one uses my analog repeater in digital mode is there a way >> to convert that to analog so that the digital does not go out over the air >> also I was wondering if it was possible to block such transmissions make >> asterisk ignore digital type audio.. >> >> Loren Tedford (KC9ZHV) >> Email: lorentedford(a)gmail.com >> Phone: >> <http://www.lorentedford.com>http://www.lorentedford.com >> <http://www.kc9zhv.com>http://www.kc9zhv.com >> <http://hub.kc9zhv.com>http://hub.kc9zhv.com >> >> >> _______________________________________________ >> App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >> down to the bottom of the page. Enter your email address and press the >> "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > >

4 3

Is there a way to convert digital to analog?
by Loren Tedford 12 Aug '15

12 Aug '15

Lets say some one uses my analog repeater in digital mode is there a way to convert that to analog so that the digital does not go out over the air also I was wondering if it was possible to block such transmissions make asterisk ignore digital type audio.. Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

2 1

Pickle - xM - MAC Address Reboot Issue
by John C. Westmoreland, P.E. 12 Aug '15

12 Aug '15

Hello All, For those of you running Pickle - I know you are aware of this issue - the ethernet is done through USB and the xM get a new MAC address when it reboots. I force my routers ARP cache to update - that is my solution - but, I was wondering what everyone else does. It had me going for a while until I noticed the stale entries in the router's ARP cache. 73's, John AJ6BC

2 1

Beagle Board-xM Pickle Build w/URI
by John C. Westmoreland, P.E. 10 Aug '15

10 Aug '15

Hello All, I have an xM up and running with the latest build from allstarlink.org - is there one site that has example configs for iax.conf, rpt.conf, and simpleusb.conf for the xM using the URI? I currently have some radios from Yaesu - the VX-7R has been interfaced and seems to work; but my current configs are relatively simple. I also want to put a FT-7900R on line. How do you eliminate the telemetry 'node xx connected, node xx disconnected' messages from being broadcast? 73's, John AJ6BC

3 5

Pickle Source Tree
by John C. Westmoreland, P.E. 10 Aug '15

10 Aug '15

Hello All, Can someone point me to the Pickle SVN or source code server? 73's, John AJ6BC

1 0