- App_rpt-users - lists.keekles.org

DRX-1 pinouts
by Lu Vencl 23 May '15

23 May '15

I received a DRX-1 back in December but just now hooking it up as I loaned it to a radio club that was desperate to get back in the air. I did not get the manual as they inadvertently left it out of the box. I am looking to see if anyone might have the pin outs to a URI? Thanks. Lu Vencl KA4EPS

1 0

ACID Install scripts. Help
by Barry 23 May '15

23 May '15

Hi All I am trying to install ACID Installer onto an ALIX-800 card this needs a CF Card install I can build a Centos 5.7 onto the CF Card but cant figure out how to install asterisk allstar from that point on Does anyone have a copy of the actual install scripts that are embed into the ACID CD I have looked but there are no scripts every things seems to be en-nested in many .img files that are loaded in phases eg boot phase phase 1 phase 2 etc any ideas or help? Thanks Barry G8SAU

3 2

Hf remote base
by Robert Newberry 23 May '15

23 May '15

I was reading about hf remote bases on the internet. There doesn't seem to be a lot of information out there on it. I did see the thr IC-706 and FT-897 are supported. I have the 897 and it really doesn't get much use. I think this would be a great way to get more use out of it. Does anyone on this list currently do this? How do you control the squelch? Are you using an auto tuner? Or fixed frequency. Also I read you can create access control to prevent unauthorized use. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812

2 1

How to convince IT
by Skyler Fennell 23 May '15

23 May '15

What should I say when they ask how Allstar is secure and how it authenticates so I can get ports. I am putting a repeater on a high school. Thanks Skyler

2 1

Echolink Configuration Changes Not 'Sticking' on Allstar Portal
by John 22 May '15

22 May '15

I've been attempting to change Echolink access from one of my servers to another. Each time I do, it returns to the previous value. I've tried with both Chrome and Firefox Browsers. Logged in to the Allstar Portal Selected Server, Server Configuration (selected my RaspberryPi2 server) Selected Echolink Settings Selected Echolink Node Number (41398) Selected the Dropdown for Allstar Node Number (27911) When I go back and check, Allstar Node Number is assigned to node 2347, not 27911. Have I missed a step along the way (or maybe two)? John WB5NFC

5 4

Re: [App_rpt-users] Announce system wide status only local?
by mike＠midnighteng.com 19 May '15

19 May '15

Tim, That may well stop local telemetry, but I believe that the question is to stop it (the query responce) from propagating to connected systems. I don't think there is a way to do that. It is in the IAX stream of connected stations. It is up to the local node owner to limit playback of what telemetry is played on their local node from what is propagated across the connected network. You can only set your node. If I am wrong on this, please, someone chime in because that is my understanding of it. And based on how I have played with it, it works that way. I don't know if you can query your system on a command line for connected systems "without triggering the same". Perhaps you can. If you can, then you have the ability to email/text that to the outside. So if you can query on a command line without propagating the info, you might be able to script it and give that a command for "local playback only" by just reading the text piped output or just count how many stations are connected (statistics) etc. I don't run/query my nodes from a command line much, just the OS. So I am not aware of the differences "if any". This question has come up many times before. Not sure if anyone has had a work around. It would seem to me that there should be a work around because allmon can get a list without triggering list query propagation. So that's a start. ...mike/kb8jnm > Perhaps telemdefault=2 will do what you want. > http://docs.allstarlink.org/drupal/node/128 > <http://docs.allstarlink.org/drupal/node/128> > > -- > Tim > :wq > >> On May 17, 2015, at 4:26 AM, Skyler F <electricity440(a)gmail.com> wrote: >> >> Is there a way to announce the system wide status only local so it does >> not play on others repeaters with telemetry enabled? >> >> Skyler >> KDÃWHB >> >> -- >> Skyler Fennell >> amsatnet.info <http://amsatnet.info/> >> KDÃWHB >> electricity440(a)gmail.com >> <mailto:electricity440@gmail.com>_______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >> down to the bottom of the page. Enter your email address and press the >> "Unsubscribe or edit%2

2 2

good morning , DMK URiX interface loss of connectivity
by Mike Lussier 19 May '15

19 May '15

I have havd several all star nodes up and running using the DMK URIx interfaces each connected to thier own BeagleBone Black. Normally I see the green light on the URIx blinking at me. In the past few months I have seen where the light stops blinking. some times pulling the USB for 10 seconds and plugging it back in solves the problem. worse case a full reboot of the system. . now its only getting worse instead of better. and almost daily issue. I thought about the watchdog idea. but it monitors the read write to a file if I remember correctly. is it possible to rewrite the watchdog to monitor the pulses of the URI instead and act on the loss of pulses from the URI Mike AE4ML -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

3 2

AllStar nets
by Skyler F 19 May '15

19 May '15

I have an AllStar node on a repeater clubs repeater. There isn't much traffic, and they think it is too much of a private repeater where I just use it. To promote use of the AllStar repeater, they have requested I air a variety of nets. What nets that have AllStar link do you guys recommend? So far, all I have is my net on Thursday at 7:00 PM MST and the Astronomy net at 7:00 PM MST. By the way, if anybody wants to link to my amateur satellite net on Thursday, its node 40764. If there isn't one, there should be an AllStar net. Thanks for suggestions Skyler KDØWHB

2 1

Voting
by Robert Newberry 18 May '15

18 May '15

I have a mild interest in voting. Seems like the RTCM are the way to go. Can anyone give me a brief over view? What I specifically want to know if my main site where the transmitter resides currently runs on a Acid box, do I need to run a RTCM there as well? Or do I only need them at my RX sites. Thank you N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812

5 5

DMK URiX interface loss of connectivity
by Steve Liggett 18 May '15

18 May '15

Did you upgrade to the latest BBB version? steve W3RX 28325 On May 18, 2015, at 12:00 PM, app_rpt-users-request(a)ohnosec.org wrote: > DMK URiX interface loss of connectivity

1 0