- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] good morning , DMK URiX interface loss of, connectivity
by Steve Zingman 18 May '15

18 May '15

Mike, I can't speak to the version of Linux and Asterisk you are running on the BBB if it is from hamvoip.org. On the BBBs I run I use Debian Wheezy now, moving to Jessie soon. If you continue to have problems you may want to try Debian. 73, Steve N4IRS On 5/18/2015 12:00 PM, app_rpt-users-request(a)ohnosec.org wrote: > > Message: 1 > Date: Mon, 18 May 2015 11:22:44 -0400 > From: Mike Lussier <mike.lussier(a)gmail.com> > To: ALL STAR <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] good morning , DMK URiX interface loss of > connectivity > Message-ID: > <CAJ_8STkmLw8a7ntWwE6xU8Fv+sD0bSzczu+hoEZLxWx=T_-QNg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I have havd several all star nodes up and running using the DMK URIx > interfaces each connected to thier own BeagleBone Black. Normally I see the > green light on the URIx blinking at me. In the past few months I have seen > where the light stops blinking. some times pulling the USB for 10 seconds > and plugging it back in solves the problem. worse case a full reboot of the > system. . now its only getting worse instead of better. and almost daily > issue. I thought about the watchdog idea. but it monitors the read write to > a file if I remember correctly. is it possible to rewrite the watchdog to > monitor the pulses of the URI instead and act on the loss of pulses from > the URI > > > Mike AE4ML -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 75, Issue 37
by Jim Korenz 18 May '15

18 May '15

One thing you could try is to setup a cron job to reboot the system. Say at 4 AM do "shutdown -r now". I was having problems with the BBB and ver1.0 software with the USB dongle hanging up. This fixed it for the most part. Down from every other day to maybe once a month. JimK N8PXW -------------------------------------------- On Mon, 5/18/15, app_rpt-users-request(a)ohnosec.org <app_rpt-users-request(a)ohnosec.org> wrote: Subject: App_rpt-users Digest, Vol 75, Issue 37 To: app_rpt-users(a)ohnosec.org Date: Monday, May 18, 2015, 12:00 PM Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. good morning , DMK URiX interface loss of connectivity (Mike Lussier) ---------------------------------------------------------------------- Message: 1 Date: Mon, 18 May 2015 11:22:44 -0400 From: Mike Lussier <mike.lussier(a)gmail.com> To: ALL STAR <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] good morning , DMK URiX interface loss of connectivity Message-ID: <CAJ_8STkmLw8a7ntWwE6xU8Fv+sD0bSzczu+hoEZLxWx=T_-QNg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I have havd several all star nodes up and running using the DMK URIx interfaces each connected to thier own BeagleBone Black. Normally I see the green light on the URIx blinking at me. In the past few months I have seen where the light stops blinking. some times pulling the USB for 10 seconds and plugging it back in solves the problem. worse case a full reboot of the system. . now its only getting worse instead of better. and almost daily issue. I thought about the watchdog idea. but it monitors the read write to a file if I remember correctly. is it possible to rewrite the watchdog to monitor the pulses of the URI instead and act on the loss of pulses from the URI Mike AE4ML -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

1 0

ACID/URIx to CDM1250
by Apu 18 May '15

18 May '15

I'm trying to interface a Motorola CDM1250 to a Linux (ACID) server using a URIx and the pinout listed for the GM300 on the DMK website. I am successfully triggering the PTT and transmitting audio, but I am not receiving any audio to a SIP softphone connected to the node. I see similar posts about this problem in the list archives from years ago but none of those solutions seems to be making a difference for me. Any thoughts? Thanks in advance, -- Apu <apu(a)spfld.com>

2 3

link ,15 ?
by jimmy keffer 17 May '15

17 May '15

is their a way i can set my node that when i link,15 2 get all nodes connected that the output os only played over my local node so other nodes don't need to hear 15 mins of node numbers? jimmy ka3vgm

2 3

Announce system wide status only local?
by Skyler F 17 May '15

17 May '15

Is there a way to announce the system wide status only local so it does not play on others repeaters with telemetry enabled? Skyler KDØWHB -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

3 2

Anyone using an Intel Compute Stick?
by Mickey Baker 15 May '15

15 May '15

It looks interesting for this type application. -- Mickey Baker, N4MB Fort Lauderdale, FL *“Tell me, and I will listen. Show me, and I will understand. Involve me, and I will learn.” *Teton Lakota, American Indian Saying.

1 0

Re: [App_rpt-users] High pitch audio
by pete M 15 May '15

15 May '15

yup I did in early test, and it did not seam to fix it.. Now I did change it and relaoded the settings un the asterisk cli and it did made a BIG change.. strange.. did I forgot to reload the first time? maybe.. thanks again for the help From: wb3awj(a)comcast.net To: petem001(a)hotmail.com Subject: Re: [App_rpt-users] High pitch audio Date: Fri, 15 May 2015 03:22:50 +0300 Did you try txlimonly=yes ? -- Bob Poff Loganville, Pa Thursday, 14 May 2015, 06:37PM -04:00 from pete M <petem001(a)hotmail.com>: Got 2 repeater linked together at the same site One msf5000 UHF one tkr750 VHF If I listen to the UHF repeater the audio is nice and have low and high sound (in the limit of 3hz of course) No mather if the receiving repeater is the VHF or UHF. I even asked a friend to switch from VHF to UHF on his radio and I could not detect wich was the source beside from the courtasy tone and the end if his TX. But on the VHF side the audio is High pitch no bass.. here is my config in usbsound.conf for the TKR750 [usb28739] ; VHF hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=103.5 rxctcssfreqs=103.5 txctcssfreqs=103.5 ;rxctcssoverride=0 carrierfrom=usbinvert ctcssfrom=dsp rxdemod=flat txprelim=no txlimonly=no txtoctype=notone txmixa=voice txmixb=tone invertptt=0 duplex=1 rxondelay=1 rxnoisefiltype=0 eeprom=0 Is there a something obvious that I miss? Thanks.. Pierre _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Delay
by John Locke 15 May '15

15 May '15

Hi all, I'm trying to develop a ambulance radio dispatch application. The basic features of app_rpt and iaxrpt are working OK. The radios are conned with URI interfaces. The problem is that there is a delay of about 1-2 seconds between the call of the operator and the audio received in the radios. Also, there are 2 operators (in the same room) connected with iaxrpt to the same channel and the other operator can hear the delay too. Is like an annoying echo. The network is ok and we are using a "standard" PC for the task. Do you think that a faster PC would solve the problem? Any help would be very appreciated. Thanks in advance John

3 4

Noise heard
by Robert Newberry 15 May '15

15 May '15

So ever I put my mastr ii on the air with acid using a dmk uri using usb radio. Ok hopefully I've given enough specifics. Certain users I hear on the repeater will sound like someone is quickly turning the audio on/off real fast or another example like I have a loose intermittent connection and someone is jiggling the wires which I know isn't happening. It isn't very noticeable but where the repeater normally sounds very good the one little hiccups is noticeable. A user yesterday was telling a story and was quite excited so he was hot audio wise. I know people have spoken of limitations with the DSP and audio. Is this some sort of thing with the DSP going nuts and doing something strange with the squelch. I've tried my best to explain it over email. I might be able to record it. I can also give more details if needed. It's really not a big deal, just would be nice to know what it is. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812

2 3

Id Script
by Loren Tedford 15 May '15

15 May '15

Hi I am trying to figure out the custom ID scripts I tried following the directions here from this site however was unable to figure out where i messed up. http://www.allstarnode.com/viewtopic.php?f=6&t=94 Pretty simple setup really just have 2 files however im using .wav files that i converted using the asterisks convert site located here.. http://my.digium.com/en/products/ivr/audio-converter/ I was able to figure out how to make one id play but cant get the script to rotate nor can i figure out how to reset the script to 0 if there was no repeater traffic after the last id my thought was to have an announcement on first key example Welcome to the KC9ZHV repeater located in Olney, IL then from every Id after that have a wav file that just says KC9ZHV Repeater. After the repeater has been quite for 10 minutes or so have it restart with the first wav file.. Not sure what i missed my thought is if i modified this slightly to .wav file and put my node number in like it says my theroy is it should have played idk though any thoughts would be apriciated thanks Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com

1 0