Hi Guys again
in the rpt.conf file there is an include at the end of file.
#includeifexists custom/rpt.conf
is that the correct syntax ?? should the # be there nor not ? as my
custom/rpt.conf file containing as below now is NOT being Parsed or Read ?
If I add all this extra stuff into the rpt.conf file directly it works but
problem is all
the main .conf file can be over written by the allstar control portal
thus this is why you add extra stuff into files in custom/....
any thoughts Thanks
Barry G8SAU
Hi I have been sitting on KI4LKF's chan_dstar code for a number of years
seems he is no longer in the loop and Im sure he would not object to it
being put out to others
I run XRF044 / Node 27370 as a Allstar / Dstar gateway its been running now
for about 4 years without a single problem.
so who do I send this code to so its available
this is a bit of the readme..
---///----
chan_dstar.c is the Asterisk channel driver for dstar.
This driver requires a dongle to create dstar/ambe-codec audio.
You will also need to download the dextra_client package for connecting
to dstar/dextra_srv, dstar XRF reflectors
Regards Barry G8SAU
I've been trying to get my node setup but I keep getting errors when I load
asterisk. I compiled zaptel and asterisk, but I'm not sure what's going on.
I have rpt.conf setup for using simpleusb and ztdummy loaded on modprobe.
What can be my issue? It looks like it's trying to call itself.
[May 3 23:18:26] NOTICE[15905]: app_rpt.c:22002 rpt_master: RPT thread
restarted on 41721
-- Re-Loading config for repeater 41721
-- rpt (Rx) initiating call to simpleusb/usb on SimpleUSB/usb
[May 3 23:18:26] WARNING[15905]: app_rpt.c:22014 rpt_master: rpt_thread
restarted on node 41721
[May 3 23:18:26] WARNING[15949]: chan_dahdi.c:942 dahdi_open: Unable to
set blocksize '160': Function not implemented
[May 3 23:18:26] ERROR[15949]: chan_dahdi.c:7906 chandup: Unable to dup
channel: Function not implemented
[May 3 23:18:28] NOTICE[15905]: app_rpt.c:22002 rpt_master: RPT thread
restarted on 41721
-- Re-Loading config for repeater 41721
[May 3 23:18:28] WARNING[15905]: app_rpt.c:22014 rpt_master: rpt_thread
restarted on node 41721
-- rpt (Rx) initiating call to simpleusb/usb on SimpleUSB/usb
[May 3 23:18:28] WARNING[15951]: chan_dahdi.c:942 dahdi_open: Unable to
set blocksize '160': Function not implemented
[May 3 23:18:28] ERROR[15951]: chan_dahdi.c:7906 chandup: Unable to dup
channel: Function not implemented
-- Remote UNIX connection
-- Remote UNIX connection disconnected
[May 3 23:18:30] NOTICE[15905]: app_rpt.c:22002 rpt_master: RPT thread
restarted on 41721
-- Re-Loading config for repeater 41721
[May 3 23:18:30] WARNING[15905]: app_rpt.c:22014 rpt_master: rpt_thread
restarted on node 41721
-- rpt (Rx) initiating call to simpleusb/usb on SimpleUSB/usb
[May 3 23:18:30] WARNING[15959]: chan_dahdi.c:942 dahdi_open: Unable to
set blocksize '160': Function not implemented
[May 3 23:18:30] ERROR[15959]: chan_dahdi.c:7906 chandup: Unable to dup
channel: Function not implemented
[May 3 23:18:32] NOTICE[15905]: app_rpt.c:22002 rpt_master: RPT thread
restarted on 41721
-- Re-Loading config for repeater 41721
[May 3 23:18:32] WARNING[15905]: app_rpt.c:22014 rpt_master: rpt_thread
restarted on node 41721
-- rpt (Rx) initiating call to simpleusb/usb on SimpleUSB/usb
[May 3 23:18:32] WARNING[15961]: chan_dahdi.c:942 dahdi_open: Unable to
set blocksize '160': Function not implemented
[May 3 23:18:32] ERROR[15961]: chan_dahdi.c:7906 chandup: Unable to dup
channel: Function not implemented
-- Remote UNIX connection
-- Remote UNIX connection disconnected
[May 3 23:18:34] NOTICE[15905]: app_rpt.c:22002 rpt_master: RPT thread
restarted on 41721
-- Re-Loading config for repeater 41721
[May 3 23:18:34] WARNING[15905]: app_rpt.c:22014 rpt_master: rpt_thread
restarted on node 41721
-- rpt (Rx) initiating call to simpleusb/usb on SimpleUSB/usb
[May 3 23:18:34] WARNING[15969]: chan_dahdi.c:942 dahdi_open: Unable to
set blocksize '160': Function not implemented
[May 3 23:18:34] ERROR[15969]: chan_dahdi.c:7906 chandup: Unable to dup
channel: Function not implemented
[May 3 23:18:36] ERROR[15905]: app_rpt.c:21997 rpt_master: Continual RPT
thread restarts, killing Asterisk
allstarucsc*CLI>
Disconnected from Asterisk server
I've been looking at how to use the event subsystem to change courtesy tones
based on what node is keyed.
RPT_ALINKS would work but it only shows what nodes directly adjacent are
keyed. RPT_LINKS shows what nodes are linked, but does not propagate status.
This presents a problem when we have a central node and everything linked up
to to that (it masks the actual node keyed).
Any idea if this is even possible to get this information as a variable.
If anyone had CT's changing based on an event or variable, can you share your
config?
73's
--
Bryan Fields
727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
Hi Guys
okay I fixed it by trial and error. for those who know how to fix this
thanks for the answer not yet recieved hi hi..
in this location there is bit of TXT
https://allstarlink.org/support.html#configdownload and it says do
cd /tmp
curl -L https://allstarlink.org/config/portalconfig.sh -o foo.sh
sh foo.sh ; rm foo.sh
So I did this and whoo its fixed the problem..
Thanks Barry G8SAU
Sorry, your server does not have any downloadable nodes (Register Only).
What did I do wrong ?? I know now not to fiddle and make typos look before
pressing enter.
Barry G8SAU
Hi Guys
I have been using the web portal without any problems for years and today I
changed a parameter by mistake to Node Type to Register Only and now cant
get things back to Repeater (Full Duplex) er I have no idea what I did
wrong ??
I was editing things on Node number 28203 and then went to send the info to
the server
and I am now getting this message ?? this is the download for GB3GR
ALSO I cant link to other nodes since this has happened??
I have to give up I have tried every way but loose to fix this . I have
Server GB3GR with Node 28202 that I cannot download to the server. with the
same error as below.
and I made another Server HIGH-DYKE with Node 28203 and that is the same
problem
Server Configuration Update
Sorry, your server does not have any downloadable nodes (Register Only).
What did I do wrong ?? Help fix me ..
Barry G8SAU
Hello, I have an Acid server running as a repeater with one node, I want to move that one node over to my Rasberry Pi, which files can I copy over to the Rasberry Pi system, my guess would be the voter file, rpt file and the Iax file.....????
Frank
Having some issues with connecting USB Fob/URI. I get a slow blinking
LED. Plugged in URI into another machine and worked fine.
Using a Gigabyte GA-H81N motherboard with the Intel G3220 3.0GHz LGA1150
processor. Has anyone had an issues with that board?
Sincerely,
boB - W5EVH
Also, check that the port it's on is set to 10/half. The RTCM is very unforgiving of network misconfiguration and does not do auto negotiation.
--
Bryan Fields, W9CR
(not a CCIE; too busy actually building networks)
On May 1, 2015 7:18:46 PM EDT, Chuck Henderson <rpt2(a)chuck.midlandsnetworking.com> wrote:
>I don't think that you said, but I will assume that you are using the
>Garmin GPS and that you have it located where it has a clear view of
>the
>sky and that you have it cabled correctly and with the correct
>settings, up
>to date firmware in the RTCM, etc... Most likely IMHO, you have a
>network
>problem on your Ethernet or your network between your RTCM and your
>computer. I have found that if there are lots of errors, collisions,
>re-transmissions and the such on the network, the RTCM just looses
>track of
>the GPS. Fix the network problem and the GPS will mysteriously start
>working great.
>Chuck Henderson, CCIE2285, WB9UUS
>
>
>On Fri, May 1, 2015 at 5:39 PM, Jeff Carrier <k0jsc.jeff(a)gmail.com>
>wrote:
>
>> Ok i've had pretty wide variation of replies. When I see GPS drop
>and
>> restore on the console it always indicates 10 satellites in view.
>I'm
>> assuming the RTCM is looking for 10.
>>
>> On Fri, May 1, 2015 at 3:06 PM, Mike Tubby <mike(a)tubby.org> wrote:
>>
>>>
>>> For a 2D fix you need a minimum of 3 satellites
>>> For a 3D fix you need a minimum of 4 satellites
>>>
>>> Beyond this "more is better".
>>>
>>> HTH
>>>
>>> Mike G8TIC
>>>
>>>
>>> On 01/05/2015 20:41, Jeff Carrier wrote:
>>>
>>> Does anyone know how many satellites are required for a good GPS
>lock. I
>>> keep losing lock which is causing me to lose the system.
>>>
>>>
>>> K0JSC
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing
>listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem.
>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users(a)ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press
>the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a
>message to
>>> the list detailing the problem.
>>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users(a)ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down
>> to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a
>message to
>> the list detailing the problem.
>>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users(a)ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem.
