- App_rpt-users - lists.keekles.org

new simplex node, can't connect in transceive mode
by Elden Fenison 10 Jan '15

10 Jan '15

Greetings, I just setup a new simplex node (first time). I'm using the URI and a cable that I bought that should work with my Yaesu FT-7900. I did the radio tuning. I don't have a service monitor, so I did the best I could. The problem I'm having is... I can make outbound connections to systems in monitor mode, but I seem to be unable to connect in transceive mode. When I try to connect in monitor mode, I get instant feedback saying I'm connected. When I try to connect in transceive mode, I get nothing at all.

3 11

Yaesu FT-897D as a remote bsse
by ronald simpson 10 Jan '15

10 Jan '15

Does anyone have experience using the FT-897D as a remote base tied to an Allstar node? I see there are commands and an interface schematic. I am looking for the hands on Pros and Cons. I have 2 of these rigs thought it would be interesting to put one up as an HF remote. There would be an issue with RX COR function. I can work that out. Thanks, Ron - N6GKJ

2 1

update free PBX
by Luc Drolet VE2 LUQ 09 Jan '15

09 Jan '15

Hello to you all, can you tell me if it 'ets good things to make the update free pbx and do asteriske will function well after a update or we better not do to update Thank you for your help Luc VE2LUQ

1 0

COR/PTT through SIP
by Mike M 09 Jan '15

09 Jan '15

Has anyone every looked into getting COR and PTT signaling through a SIP transport? If not, can anyone give a very high level overview of what mods would be required to do so? Regards, Mike Montalvo, KF7MBK

3 2

iaxrpt dtmf question
by jimmy keffer 09 Jan '15

09 Jan '15

is there a way to enter dtmf codes from the keyboard in iaxrpt i'm disabled and much to slow with the mouse to enter toes that way 73 ka3vgm

3 8

how to enable DTMF debug in 1.2
by Mike Lussier 09 Jan '15

09 Jan '15

I have been troubleshooting a DTMF problem sending DTMF from a handheld to ringer an IP phone. Mike has been a great help with the config today and thank you Mike. It still doesn't work so I wanted to look at a debug of the DTMF tones incase its an issue with the radio. What I found on google doesn't seem to match up with what we have here. Thank you Mike AE4ML -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

1 0

Re: [App_rpt-users] Subject:_Autopatch_type_question
by mike＠midnighteng.com 09 Jan '15

09 Jan '15

For the benefit of others, This was solved but if you are trying to do the same, you can make some example of this. In rpt.conf you need a line for the phone patch as a command... 6=autopatchup,noct=1,farenddisconnect=1,dialtime=40000 ; Autopatch up In extensions.conf the phone patch is the [radio] context [radio] exten => _5XXX,1,Dial(sip/${EXTEN},17);dial "SIP" ext on this box change to IAX if needed. Make it the first line as shown and you should not have to renumber anything. If correct and you have a sip extension on this box 5xxx you would dial... *65xxx Now this depends on where the extensions are with respect to where there are being dialed. On a remote box you need to point to the host of the extension via TRUNK That requires you route the call from each connected node to the node that hosts the extension. A scheme is required to separate extension numbers between connectable nodes. If you dial on a external iax trunk then something like this would be needed. This dials extensions 6xxx via iax2 trunk named PBX and could be the 2nd line of your [radio] stanza. [radio] exten => _5XXX,1,Dial(sip/${EXTEN},17);dial "SIP" ext on this box change to IAX if needed. exten=_6XXX,1,Dial,IAX2/PBX/${EXTEN} ;dial my ext/voicemail/functions on external trunk labeled PBX Note the rest of what you see in the radio stanza is a default scheme to check the number dialed and prevent toll numbers from being dialed on a external trunk. We don't really need that for internals if it matches a internal string. By placing it at the beginning, it will never see the rest of the stanza if true. We bypassed that by making it the first line and is so noted by having the "1"st instruction for a match. Notice all of the beginning strings are "1" because it is the first instruction only if "true", otherwise it continues until it finds the 1st matching instruction, and only then a second etc. (just so you can look at it and can see the program flow) The examples above are dialed for a radio connection to this node only 5xxx or ones on other trunked node in the case of the 6xxx. Each node must do it's own routing to destination. Hopefully I did not confuse anyone but the asterisk manual is a powerful tool when you want to know how it all works. Only minor adjustments are made for app_rpt here and there. ...mike/kb8jnm > > -------- Original Message -------- > > Subject: [App_rpt-users] Subject: Autopatch type question > > From: Mike Lussier <mike.lussier(a)gmail.com> > > Date: Fri, January 09, 2015 10:43 am > > To: ALL STAR <app_rpt-users(a)ohnosec.org> > > > > > > Mike, > > > > Thanks , > > > > I put two line into extensions.conf exactly as you showed. these were using > > _5XXX & the other _6XXX > > I did an astres.sh and tried the radio 5000 & 6000 no good. > > Then I ran asterisk -vvvr and setup debug and verbose to level 9 keyed the > > radio I get a slew of node variable dumps for node 41470 8 variables and a > > hangup. Nothing in the debug showed the keys pressed on the radio. > > > > MIke AE4ML > > > > > > -- > > > > *"We must reject the idea that every time a law is broken, society is > > guilty rather than the law breaker.It is time to restore the American > > precept that each individual is accountable for his actions." ~ Ronald > > Regan*<hr>_______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] Subject: Autopatch type question
by mike＠midnighteng.com 09 Jan '15

09 Jan '15

Mike, You do have a phone patch command set-up in rpt.conf ? default = *6 with default context of radio and dialing *6 5xxx from radio ? Are the 5xxx & 6xxx extensions on the local node or other node ? One would need to specify the trunk used in the dial if external. And not knowing what else is in your radio stanza for phone patch, you might need to change the instruction number based on where you placed the dial string line. ----------------- If your still at it...., I wonder if you can send me (direct) your extensions.conf iax.conf < & mark any iax trunks with a comment Perhaps I can make this a bit shorter. I'm a little busy today but I think I can manage slowly. Well take it off list, figure it out and report a solution to all. ...mike/kb8jnm > -------- Original Message -------- > Subject: [App_rpt-users] Subject: Autopatch type question > From: Mike Lussier <mike.lussier(a)gmail.com> > Date: Fri, January 09, 2015 10:43 am > To: ALL STAR <app_rpt-users(a)ohnosec.org> > > > Mike, > > Thanks , > > I put two line into extensions.conf exactly as you showed. these were using > _5XXX & the other _6XXX > I did an astres.sh and tried the radio 5000 & 6000 no good. > Then I ran asterisk -vvvr and setup debug and verbose to level 9 keyed the > radio I get a slew of node variable dumps for node 41470 8 variables and a > hangup. Nothing in the debug showed the keys pressed on the radio. > > MIke AE4ML > > > -- > > *"We must reject the idea that every time a law is broken, society is > guilty rather than the law breaker.It is time to restore the American > precept that each individual is accountable for his actions." ~ Ronald > Regan*<hr>_______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Subject: Autopatch type question
by Mike Lussier 09 Jan '15

09 Jan '15

Mike, Thanks , I put two line into extensions.conf exactly as you showed. these were using _5XXX & the other _6XXX I did an astres.sh and tried the radio 5000 & 6000 no good. Then I ran asterisk -vvvr and setup debug and verbose to level 9 keyed the radio I get a slew of node variable dumps for node 41470 8 variables and a hangup. Nothing in the debug showed the keys pressed on the radio. MIke AE4ML -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

1 0

App_rpt support to AMI Events (https://github.com/ismaelisuani/rpt_events)
by Ismael Isuani 09 Jan '15

09 Jan '15

Hi Jim, I've added support to receive events via AMI when app_rpt updates RPT_* variables and when MDC-1200 and DTMF are detected, without the need for pooling sending commands via AMI. You can see the changes here: https://github.com/ismaelisuani/rpt_events/commit/dcc61ebef5ecc405a5e3839be… Is it possible to include this feature to current project? Regards. Ismael Isuani

3 3