- App_rpt-users - lists.keekles.org

Error
by Angelo Glorioso 09 May '14

09 May '14

Am I correct to say port 4569 is not open with this error?? [May 9 09:07:13] WARNING[29666]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '29882' 7 3 de Angelo

3 3

Re: [App_rpt-users] Error
by Angelo Glorioso 09 May '14

09 May '14

I think you are right Andrew. T-Mobile. America's First Nationwide 4G Network Andrew Sylthe <asylthe(a)kc9ona.com> wrote: Angelo, I don't believe that to be an error. I constantly see the same in my logs and it isn't an issue: [May 9 15:49:33] WARNING[509]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '27220' [May 9 15:49:34] WARNING[511]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest The "warning" is notifying you that a registration request was sent. Thanks! On Fri, May 9, 2014 at 9:11 AM, Angelo Glorioso <n5uxt(a)hotmail.com> wrote: > * Am I correct to say port 4569 is not open with this error??* > > > > *[May 9 09:07:13] WARNING[29666]: chan_iax2.c:10127 iax2_do_register: > REGISTER-LOG: Sending registration request for '29882'* > > > *7 3 de Angelo* > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Andrew Sylthe KC9ONA

1 0

Re: [App_rpt-users] Error
by Angelo Glorioso 09 May '14

09 May '14

T-Mobile. America's First Nationwide 4G Network Andrew Sylthe <asylthe(a)kc9ona.com> wrote: Angelo, I don't believe that to be an error. I constantly see the same in my logs and it isn't an issue: [May 9 15:49:33] WARNING[509]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '27220' [May 9 15:49:34] WARNING[511]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest The "warning" is notifying you that a registration request was sent. Thanks! On Fri, May 9, 2014 at 9:11 AM, Angelo Glorioso <n5uxt(a)hotmail.com> wrote: > * Am I correct to say port 4569 is not open with this error??* > > > > *[May 9 09:07:13] WARNING[29666]: chan_iax2.c:10127 iax2_do_register: > REGISTER-LOG: Sending registration request for '29882'* > > > *7 3 de Angelo* > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Andrew Sylthe KC9ONA

1 0

RTCM and IPv6
by ssedgwick 09 May '14

09 May '14

Hi All, Working on a temporary RTCM setup to use while at the Dayton Hamvention and while at the hotel that does not have wired Ethernet. What I'm trying to do is connect the RTCM via the Ethernet port to my Windows laptop that is tethered to my Sprint mobile phone that has internet. I know there are much better ways of doing this, but this is what I have available without additional cost, and it's only going to be used for a couple days. I have internet connection sharing turned on so the tethered internet connection is available on the Windows laptop Ethernet connection. I have tested the Ethernet connection by connecting another Windows computer to the tethered laptops shared Ethernet connection and it works fine, but when I connect the RTCM it never connects. I have DHCP enabled on the RTCM. Looking at the tethered laptop ipconfig screen we see both IPv4 and IPv6 addresses listed, but I'm not sure it that the issue or if it's something else. Any ideas what I could try to make this work. Thanks, Steve_WB8GRS

2 1

Changing Courtesy Tones, and SSHing into the computer
by Skyler F 09 May '14

09 May '14

Hello, I am new ham in high school, and finally got a little SIMPLEX repeater up and running. *My first question* Is about SSHing into the computer remotely. I first gave it a try on my LAN, because I knew port forwarding would not be required. First, I *Changed *the port 222 to port 22 on the SSHD_Config file We are using an apple airport router, which states the LAN address of the Ethernet port is 10.0.1.1. I typed ssh root(a)10.0.1.1, and I got a connection refused. I was able to reverse SSH back to my macintosh using ssh username@computersLANip from ACID, but when I tried to SSH back to acid, it would not work. Just Connection Refused. After I login on ACID it says Root@Skylersnode, my node, and I also gave ssh root@<node number> and ssh skylersnode@local IP a try, but still no success. Are there any suggestions on getting this to work? *Second question: Courtesy tones,* I just figured out how to create a ULAW on audacity, and mount a flash drive on the command, and I am wondering if I can change the courtesy tones or any other audio file. Like the "I OWN COMMAND" annoying thing. Where would the courtesy tones be located, and under what file name? *Third question: *why it wont work on the web transceiver When I dial in the node on the web transceiver, nothing happens, and when I hit the connect button, it does not do anything. Is there any way to get it to work, or will the web transceiver not work with my node. I would think it should work, because I have almost the same setup as Willem's node, 29571<https://allstarlink.org/portal/webtransceiver-frameset.php?nodenum=29571>,on saddle back mountain. *Last Question: Won't connect to 28298 or 28299* This node is part of the FUN system here in Colorado, and I tried dialing 28298, which belongs to Jeff KØJSC, but I heard nothing, not even the change in courtesy tone. He has no idea why my node will not connect up, but it is weird because it won't even show up on the web transceiver. Thanks Skyler KDØWHB

8 12

RTCM and voting setup
by Mark Johnston 09 May '14

09 May '14

Hello everyone, Trying to setup 2 RTCM's for voting - starting off with 1 for the master timing source - no Radio. and one currently at the same site for testing purposes, both have GPS configured & working. The radio is a GE Mastr II base - I located a point where the CTCSS decoder gets the discriminator audio and removed the board for CTCSS decode. Plugged in the audio to the RTCM there. I do hear the audio, but am having multiple issues, first audio sounds OK locally (repeat) but the biggest issue there is the PL is loud and plfilter = y in the voter.conf appears to do nothing for that. Second issue I am not seeing a way to decode PL either in the RTCM or in asterisk from a voter. I know with usbradio/simplusb it has the option but from what I know those are not going to do anything here? also during the RTCM setup the SQ adjustment appears to calibrate go from flashing to solid on the LD3 indicator. but when adjusting the SQ pot 10 , 50 , or 150 turns does nothing to extinguish the LD3 as it should, unless I am misunderstanding the directions - does not make sense. Anyone know if there is something I could be missing? below are the rpt.conf (partial) and voter.conf files rpt.conf ---- [28344] ; Change this to your assigned node number rxchannel=voter/28344 duplex=2 ;erxgain=-3 ;etxgain=3 ;controlstates=controlstates scheduler=schedule28344 morse=morse28344 macro=macro28344 functions=functions28344 phone_functions=functions28344 link_functions=functions28344 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iKC7DMF accountcode=RADIO hangtime=100 althangtime=100 totime=530000 idtime=540000 politeid=3000 idtalkover=|iKC7DMF unlinkedct=ct2 ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 ;holdofftelem=0 beaconing=0 linktolink=yes telemdefault=2 propagate_dtmf = yes propagate_phonedtmf = yes ; ; *** Status Reporting *** ###### /etc/asterisk/voter.conf ;[general] port = 667 buflen = 500 password = pwblah [28344] 1306 = pw1blah,master plfilter = y thresholds = 255,110=5 linger=6 1300 = pw2blah,transmit plfilter = y thresholds = 255,110=5 linger=10 ##### Thanks, Mark KC7DMF

2 2

Allmon Control Panel
by Tim Sawyer 09 May '14

09 May '14

Allmon can now do pretty much anything that can be done at the Asterisk CLI giving you complete web based control of your nodes. The Allmon Control Panel is a popup window which allows selected commands to be issued through the Asterisk Manager Interface. The command selection is configured with an ini file allowing the Allmon admin set up virtually any AMI command. The included sample ini show you just some of the things you can do. Users must login to see the new Control Panel button. If more than one node is display, select a node from the drop down and them press Control Panel. Please grab the latest Allmon at my gtihub at https://github.com/tsawyer/allmon/tree/allmon2 Enjoy, — Tim WD6AWP :wq

2 1

Re: [App_rpt-users] wiki instructions for a manual install
by Trevor Halsey 09 May '14

09 May '14

I have xipar running on a "HP Small Form Factor" desktop, just having issues with uptime, so I've got some experience with it. So far i have two nodes, just waiting for some USB fobs at hamvention. Anyways the curve is expected, as I assume I need to manually compile apt_rpt, and asterisk. I had seen some steps for raspberry pi in here and assumed it would just be about the same. Thanks, KD8SEP Sent from my Windows Phone ________________________________ From: David McGough<mailto:kb4fxc@inttek.net> Sent: ‎5/‎8/‎2014 6:51 PM To: Trevor Halsey<mailto:thals1992@hotmail.com> Cc: app_rpt-users(a)ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] wiki instructions for a manual install Hi Trevor, I seriously doubt this approach will give you anything even close to satisfactory results. Any type of VoIP application requires instantaneous server availability or your audio quality will be lousy. Virtualized servers (such as provided by the host you mention) work okay for websites, etc., where host latency is tolerable. But it flat out won't work for VoIP. For your first step, you *really* need to build a system on a small dedicated box, using the distro you're considering. Then, try virtualization using a free package like VirtualBox. Once you've achieved these steps, next consider how to host the conference server. BTW, I'm not trying to dissuade from trying this, but, there will be a steep learning curve. 73, David KB4FXC On Thu, 8 May 2014, Trevor Halsey wrote: > HI, I'm trying to make a node/conference server on a Amazon server, e.g. a virtualized server without the capability to use an iso, I have to use a prebuilt image of debian, redhat, centos, or whatever distro is available there. Is there something out there instruction to do this on a CentOS 6 (x86 or x64, does it matter?) instance? My final goal is to be able to just make the machine a public image for others to install as well, but I'm still learning on how in the world I'm supposed to use Amazon AWS. Keep in mind I'm using their free package, 1cpu, 60gb of storage, and ~600mb of ram. I saw some instructions for raspberri pi, but I can't seem to find them again. > > I'm also looking to install freestar (I though I saw Ramesh in the somewhere in the archives) on top of apt_rpt in the future to be an echolink, allstar, and xrf reflector, but I'm having trouble for the initial steps after installing the OS. (Sucks to be a linux n00b.) I'm intending on using this only on occasion at first, where my county might have a need to bridging Echolink, AllStar, and DStar to a weather net for any/all connectible repeaters in the coverage area when a tornado warning occurs. >

1 0

wiki instructions for a manual install
by Trevor Halsey 09 May '14

09 May '14

HI, I'm trying to make a node/conference server on a Amazon server, e.g. a virtualized server without the capability to use an iso, I have to use a prebuilt image of debian, redhat, centos, or whatever distro is available there. Is there something out there instruction to do this on a CentOS 6 (x86 or x64, does it matter?) instance? My final goal is to be able to just make the machine a public image for others to install as well, but I'm still learning on how in the world I'm supposed to use Amazon AWS. Keep in mind I'm using their free package, 1cpu, 60gb of storage, and ~600mb of ram. I saw some instructions for raspberri pi, but I can't seem to find them again. I'm also looking to install freestar (I though I saw Ramesh in the somewhere in the archives) on top of apt_rpt in the future to be an echolink, allstar, and xrf reflector, but I'm having trouble for the initial steps after installing the OS. (Sucks to be a linux n00b.) I'm intending on using this only on occasion at first, where my county might have a need to bridging Echolink, AllStar, and DStar to a weather net for any/all connectible repeaters in the coverage area when a tornado warning occurs.

3 2

portal download
by Greg 08 May '14

08 May '14

Worked just now!

1 0