- App_rpt-users - lists.keekles.org

Repeater DTMF Usage
by kk6ecm 08 May '14

08 May '14

When connecting Allstar repeater nodes from your radio DTMF pad, what app_rpt configuration suppress the DTMF tones from being sent to the repeater transmitter. In other words how does this work? Also, is there a configuration that sends the tones through. Thanks, Bob kk6ecm Sent from iPad

2 2

portal download
by James H Vernetti 07 May '14

07 May '14

I have been trying for a week to download the config from the portal for node 27260 and 40818. I have tried four different router's and have even hooked the computer direct to the cable modem and nothing works. I know that I am communicating with the portal because I gave it a phony password and it told me " improper password " or something to that effect. anyone know what I should try? Jim wd0ekr

3 2

Beagle Blacks back in at Adafruit
by Doug Crompton 06 May '14

06 May '14

They are back in stock again and this might be the last of the rev B models. Rev C comes out in early May and is expected to cost about $10 more with 4G eMMC. You do not need a rev C for Allstar but after Rev B runs out that will be your only choice.BeagleBone Black Link: http://www.adafruit.com/products/1278 Get the 9.95 black case also and power supply if you don't have one. 73 Doug WA3DSP http://www.crompton.com/hamradio

2 2

MicroSD cards
by Doug Crompton 06 May '14

06 May '14

If you bought a BBB you will need at least one microSD card to burn the image on. Here is about the best deal around - http://www.amazon.com/SanDisk-MicroSDHC-Frustration-Free-Packaging--SDSDQU-… Highly recommended is at least Sandisk ultra 16G class 10 30mb read. Buy at least three for free shipping. 73 Doug WA3DSP http://www.crompton.com/hamradio

2 2

BBB Install
by ronecs＠stx.rr.com 06 May '14

06 May '14

I have a couple of BBB that I'm trying to get up on allstar. I see a couple of QSO's have been accomplished between 2 BBB's. Any timeline for an install script? Thanks. Ron

2 1

Finding older version of ACID
by Bob 06 May '14

06 May '14

I'm running the current version of ACID (based on CentOS 5.10), and find I can't use static IP addresses. After many hours of troubleshooting until I found out there is an OS bug in the current ACID build. In some cases, static IPs are all I have, unless I can perhaps install a router on the static IP, then tuck the Allstar server in behind to utilize a DCHP configuration. Are the older versions (CentOS 5.7) available, and will they work with the newer Asterisk svn updates? What are some of the hurdles using and older ACID version? ... still trying to avoid a total recompile on a new OS :-) Thanks, Bob kk6ecm

8 14

Re: [App_rpt-users] nodesetup again, port?
by mike＠midnighteng.com 05 May '14

05 May '14

1 0

nodesetup again, port?
by Greg 05 May '14

05 May '14

Am I gathering that port 4569 needs to be open to the server for the nodesetup.sh to complete? I haven't tried that yet.. Internet down here and running over cellular connection temporarily.

1 0

Re: [App_rpt-users] Failing to get server config download
by mike＠midnighteng.com 05 May '14

05 May '14

1 0

Nodesetup
by Jack 05 May '14

05 May '14

I am having the same problem. Tried different ports on rouner, connecting directly to router still no luck. It's worked fine in the past. Jack K6PQN

1 0