- App_rpt-users - lists.keekles.org

TOT Issue
by Fredric Moses 08 Aug '12

08 Aug '12

I am having an issue with time out timers and 2 of my nodes.. I have a simplex node at site A and a full duplex repeater at site B. The simplex node is remoted to a VHF repeater which then is connected the UHF repeater at site B... Everything works fine expect during some of the nets... The long hang time on the VHF repeater causes a TOT message out the UHF at site B... Site B comes up and says Node Time Out and says the repeater B id number... If i kerkunk the UHF repeater it resets and picks right back up even though the carrier hasn't dropped from the VHF repeater... I have tried. remote_timeout=0 But that doesn't help... Is there a time out timer I am missing that handles network ports? -- Fredric Moses - W8FSM - WQOG498 fred(a)moses.bz

1 0

HP t5720 Thin Client / AllStar config recommendations for audio problems.
by Bob Roszkowski 07 Aug '12

07 Aug '12

Does anyone have any configuration hints to get an HP T5720 (1GHz processor/ 1GB Ram/ 8GB HD) with a URI to work with AllStar? I setup a node but I am having some issues. It seems that the machine is just not fast enough or I have too many services running. The audio sounds very bad once and a while. If I send a command for Say Time, it will sometimes come back sounding very bad. Then if I do it again, it sounds ok. Hard to describe how it sounds, my best guess would be that it is lacking resources. Also, I am noticing that during one of the nets today, the system was not passing audio in either direction. Then it started working. Strange problem. I know internet connection is good and tried it at two different sites/ISPs. Are there things I can check, enable, disable or otherwise? Since there is no real Hard Drive in the system, it is using a DOM, is there anything I need to set different? I am using ACID. thanx -- boB - W5EVH

3 2

Re: [App_rpt-users] HP t5720 Thin Client / AllStar config recommendations for audio problems.
by Ramesh Dhami, VA3UV/M 07 Aug '12

07 Aug '12

Hi Bob: Jon, VA3RQ, has just reminded me that on the HP's we use chan_simple_usb. The HP's do not have the 'HP' to handle the dsp processing used by chan_usb. R. Sent on the TELUS Mobility network with BlackBerry -----Original Message----- From: "Ramesh Dhami, VA3UV/M" <ramesh(a)va3uv.com> Date: Tue, 7 Aug 2012 12:03:57 To: Bob Roszkowski<bob(a)w5evh.org>; app_rpt-users<app_rpt-users(a)ohnosec.org> Reply-To: ramesh(a)va3uv.com Subject: Re: [App_rpt-users] HP t5720 Thin Client / AllStar config recommendations for audio problems. Hi Bob: As you know, I use the HP T5710's quite a bit for both app_rpt and Free Star*. For app_rpt you are limited to half-duplex with these HP's. Please confirm your configuration. Cheers, Ramesh. Sent on the TELUS Mobility network with BlackBerry -----Original Message----- From: Bob Roszkowski <bob(a)w5evh.org> Sender: app_rpt-users-bounces(a)ohnosec.org Date: Tue, 7 Aug 2012 01:06:41 To: <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] HP t5720 Thin Client / AllStar config recommendations for audio problems. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Question on experimental IRLP connections (not trying to bring up stnXXXX connections)
by Michael J. Wolthuis 06 Aug '12

06 Aug '12

I am wondering if connections can be enabled to an allstar node configured as an Experimental IRLP station? I think I have seen this done, I know this is acceptable to IRLP as it is inbound only, but I haven't found any info on how to configure it. I would like to configure exp0049 on one of my allstar nodes. Experimental is inbound only, not able to make calls out. Is this something that can be done and is found acceptable? Mike Kb8zgl

2 1

Text-2-uLaw thread update ...
by Tony Youngblood 05 Aug '12

05 Aug '12

;update:Asterisk Dtmf PlayBack Text2uLaw Sound File http://allstarnode.com/viewtopic.php?f=6&t=81&sid=dd06dd3d77e0a78040a571823… 73 ;(;) A* Irlp eL :(:)

1 0

Nasa Select via music on hold?
by Alan Adamson 05 Aug '12

05 Aug '12

It seems there are ways to bring nasa select into allstar, one seems to be via music on hold. Anyone have a configuration of doing this? Or specifically how to bring in the audio from the Mars landing tonight into allstar (hmm, means I need to turn off my timeout timers too.. must be a cop for that I would suppose?) Alan

2 1

Saving node configuration to allstarlink.org
by Bradley Haney 02 Aug '12

02 Aug '12

I have saved our custom configuration doing i think it was a savenode.sh It told me verifiying and then said something saved to register.allstarlink.org. The 24 dollar question is.. LEts say the computer crashes.. I rebuild it and now i want to down load the custom config i saved at register.allstarlink.org. How would i do that.? I know i can't do a portal config as that would just have the basic settings. Anyone run into this?

3 3

Problems
by Bryan D. Boyle 26 Jul '12

26 Jul '12

with the download site? Trying from 3 different networks..and timing out...just wondering... -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

1 0

Re: [App_rpt-users] /var/lib/asterisk/sounds/rpt
by Alan Adamson 26 Jul '12

26 Jul '12

Check the makefile or install script I can't remember at the moment, at the bottom of it is where those are downloaded and unziped or untar'ed etc. Alan -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bradley Haney Sent: Thursday, July 26, 2012 2:29 AM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] /var/lib/asterisk/sounds/rpt Some how i deleted everything in that folder.. is there a way to get those files back without downloading the whole program again? Brad _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

/var/lib/asterisk/sounds/rpt
by Bradley Haney 26 Jul '12

26 Jul '12

Some how i deleted everything in that folder.. is there a way to get those files back without downloading the whole program again? Brad

1 0