- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Zoiper Android and Acid
by Ed Wilhelm 18 Jul '12

18 Jul '12

Thanks for the info. I must be doing something very stupid. Can not get Zoiper to register, get error: NOTICE[2761]: chan_iax2.c:6839 register_verify: No registration for peer "xyz" This occurs both over the 3G network or my local WLAN. i have IAXRPT working fine. Any ideas? Ed W8VT Node 27849 On 07/17/2012 12:29 PM, DARN SIMPLE | N0PCO wrote: > Hello Ed, Zoiper should be fairly easy to get set up on Android, > you'll just need to add the extension information for your RF Gateway > once you have things set up and ready to go. > > For a quick reference take a look at: > http://scripts.asteriskradio.net follow Scripts and Things - RF > Gateways ... there's a link for the PBX 2 RF Gateway Guide. Towards > the end of the document it talks about "RF Gateway to SIP Phone" the > same procedures can be done with IAX (just add the information to the > /etc/asterisk/iax.conf file instead of the /etc/asterisk/sip.conf file). > > > Mars - N0PCO > ALERTradio ERC > www.alertradio.net | www.asteriskradio.net | www.darnsimple.net > Technology resources for public safety. It's all about being ready. > > ALN: 2095 KC0SOK UHF 443.275+ 156.7 > > > > > > > > On 07/17/2012 09:06 AM, Ed Wilhelm wrote: >> Looking for information on configuring Zoiper on Android and app_rpt >> on Acid distro. Found some stuff on the Xipar distro but don't know >> how much difference there is between them. Any assistance greatly >> appreciated. >> >> Ed W8VT >> Node 27849 >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >

1 0

LOX and CAT 1000 Interfacing
by Bobby Lacey 18 Jul '12

18 Jul '12

Hi, I just received my lox and beagle board a few weeks ago and I'm trying to interface it with the remote base port on our CAT 1000. I'm interfacing the LOX DB9 with the CAT 1000 DB9, but I'm not sure if I have the pinout done correctly or not. Should the pinout be: LOX <> CAT 1000 GND <> GND CTCSS <> CTCSS PTT <> COR AUDIO OUT <> AUDIO IN AUDIO IN <> AUDIO OUT COR <> PTT or should the pinout be 1:1, ie: GND <> GND CTCSS <> CTCSS PTT <> PTT AUDIO OUT <> AUDIO OUT AUDIO IN <> AUDIO IN COR <> COR To interface the two boards, I'm using a DB9 to RJ45 on both ends and a straight through cat5 to connect the two. Thanks for any help! 73 Bobby KF4GTA

2 1

Node saying no longer in database
by Bradley Haney 17 Jul '12

17 Jul '12

Having issues of the WEB trans not saying its on line and saying our node is no longer in the database, but i am able to SSH into the node and connect and disconnect from other stations through the repeater.. ANy thoughts? This is for node 28079?

2 1

Needed help with XIPPR_ROIP and iaXrpt
by Federico Boesche 17 Jul '12

17 Jul '12

Hello, I'm doing my first installation of XIPPR_ROIP. I'm using a URIx and I have checked that this works well with the repeater I connected, I mean I can make it to transmit and receive. But I have not had success trying to connect to the server from the client application iaXrpt (Xelatec). I do miss something? I would appreciate any suggestions or help. Federico Boesche GUA: +502 5208 4013 skype: fboesche msm: federico(a)electronicacelular.com

7 7

Zoiper Android and Acid
by Ed Wilhelm 17 Jul '12

17 Jul '12

Looking for information on configuring Zoiper on Android and app_rpt on Acid distro. Found some stuff on the Xipar distro but don't know how much difference there is between them. Any assistance greatly appreciated. Ed W8VT Node 27849

1 0

update on DTMF regen....
by Ramesh Dhami (VA3UV) 16 Jul '12

16 Jul '12

Hi Jim; I have been able to generate 'canned' DTMF tones using the cop,48 function. I wonder if you would consider adding a function that can be called via CLI or script to offer total flexibility? - something like: rpt dtmf-regen <node_num> <dtmf_tones> where dtmf_tones can be 1234567890*#ABCD or a combination thereof. I searched the help output in CLI - couldn't find anything that offered the above functionality.... However, I was intrigued about the "frog in a blender...." ;). Cheers! Ramesh.

1 0

Using ALLSTARLINK 5.00 a month VOIP
by Bradley Haney 16 Jul '12

16 Jul '12

Hello all.. we have been using Allstarlink's voip phone service and it works great. Only one questioin . I have changed the RPT.CONF caller ID to our repeater name and a local number, but it still comes up on the phone as a CA number. Is there some other settings i need to do to change the Caller Id.? Bradley kc9gqr

2 2

Question...preventing access from web transceiver for certain callsigns...
by Bryan D. Boyle 16 Jul '12

16 Jul '12

Probably missed this along the way... 1. I'm getting a lot of drive bys via the allstar web transceiver. Is there any way (yeah, I'm a grouch) of 'blacklisting' specific call signs from connecting? Haven't seen anything, probably missing it, but if there is...would appreciate some pointers. I know it goes against the 'free and open' concept, but some folks are just annoying, even after sending them an email to stop doing it. thanks! Bryan WB0YLE #27294, 27295 and many others...

2 2

Web Trans rings 8-10 times before systems answers?
by Bradley Haney 15 Jul '12

15 Jul '12

Is there any way of shortening it up? When i am logged on i can see the incoming call on the term screen but it seems to ring extra long before the system picks it up? Any thoughts? Bradley kc9gqr/k9wra

1 0

re-generate DTMF
by Ramesh Dhami (VA3UV) 14 Jul '12

14 Jul '12

Hi All; I'd like to allow DTMF tones to pass through my repeater and, in the case of a half-duplex node, to regenerate DTMF tones on the output frequency. I have been trying to get this going (and thanks to Ken, KE2N and Jon, VA3RQ for testing with me this morning). I have the following in my rpt.conf file: duplex=1 propagate_dtmf=yes With the above, we are unable to send / pass DTMF tones. Ken suggested that I try 'parrot mode' - I enabled that by adding the following to my functions stanza: 987=cop,55 ; Parrot once by command Now, when I send *987 123 (without unkeying) and on the output, I hear 3 clicks (corresponding to 1 2 3) - i.e., muted DTMF tones. How can I pass DTMF tones (in the case of a FD repeater) or re-generate them in the case of a half-duplex system? TIA! Ramesh.

1 0