- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] installation disk
by Tim Sawyer 27 Sep '11

27 Sep '11

You are aware that the ACID install will wipe out your Windows load? It doesn't mater if you drag it or click it as long as it shows up in the left pane of Disk Utility. I don't think it maters that it's a 32 bit motherboard. I don't know what a rascall interface is. Interfaces which I know to work are the DMK Engineering URI (http://dmkeng.com/URI_Order_Page.htm) modified USB sound fobs as detailed on the Drupal web site (http://ohnosec.org/drupal/node/27) and PLRI board (http://www.qsl.net/k0kn/plri.html) Most of this stuff is documented on either https://allstarlink.org/ or http://ohnosec.org/drupal/ Let us know how it goes. -- Tim :wq On Sep 27, 2011, at 7:41 AM, Bradley Haney wrote: > i will try it that way of dragging it.. I used the disk utility but i think i clicked on the DMG image and burned that.. I will give it another shot.. The computer i am using is a compaq computer that has windows xp but its a 32 bit mother board will that matter? Also will i be able to use my rascall interface or will i have to purchase a different adapter.. > > On Tue, Sep 27, 2011 at 8:30 AM, Tim Sawyer <tim.sawyer(a)me.com> wrote: > Did you use the Disk Utility application to burn the iso image or the Finder? Finder will just copy the image onto the CD, which won't be bootable. Open Disk Utility and then drag the iso image into the left pane, make sure it is highlighted and press the burn icon. > > -- > Tim > > On Sep 26, 2011, at 8:54 PM, Bradley Haney wrote: > >> For some reason i burned the iso image on my mac and put the new dvd in the windows computer to load up but for some reason it tries to read and then does nothing.. I have already went into the bios to set up to boot from CD rom but no joy.. I then booted that machine into windows and i was able to read the disk so i know the DVD drive is working but still can't get the computer to boot .. is there a installation disc i can just purchase. also has anyone used a rascal interface with this system? >> >> Bradley Kc9gqr >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

1 0

installation disk
by Bradley Haney 27 Sep '11

27 Sep '11

For some reason i burned the iso image on my mac and put the new dvd in the windows computer to load up but for some reason it tries to read and then does nothing.. I have already went into the bios to set up to boot from CD rom but no joy.. I then booted that machine into windows and i was able to read the disk so i know the DVD drive is working but still can't get the computer to boot .. is there a installation disc i can just purchase. also has anyone used a rascal interface with this system? Bradley Kc9gqr

2 1

Latest SVN?
by Michael J. Wolthuis 27 Sep '11

27 Sep '11

I had a untouched copy of ACID from about 10 months ago running on one of my Allstar nodes. Tonight I decided to load the latest SVN on it per the instructions. I am now getting this in /var/log/asterisk/messages [Sep 26 18:35:52] ERROR[3137] codec_dahdi.c: Failed to open /dev/zap/transcode: No such file or directory I assume it is this failure causing Asterisk to crash and say: /usr/sbin/safe_asterisk: line 125: 3234 Segmentation fault (core dumped) nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} >&/dev/${TTY} < /dev/${TTY} Asterisk ended with exit status 139 Asterisk exited on signal 11. Automatically restarting Asterisk. I am on kernel 2.6.18-194.17.1.el5 with zaptel stuff loaded directly from the ACID CD I had. Any suggestions on what I messed up or if I should just go download ACID ISO and start over would be greatly appreciated. Mike kb8zgl

2 1

for those who may feel really brave...
by Jim Duuuude 26 Sep '11

26 Sep '11

For those who might feel *really* brave, I have uploaded what I *think* *might* be a working ACID install CD iso that is based upon Centos 5.7 *not* whatever the current one (I think 5.6) is. This might be helpful for those trying to load ACID on a new computer that the old iso image did not come with network support for. the URL is as follows: http://stats.allstarlink.org/dl/installcd/acid57.iso I want to make it EXTREMELY CLEAR that: 1) I have never, ever built an ACID distro before (Steve WA6ZFT usually does this, and he wasnt around to ask how to do it). 2) It *seems* to successfully run on a virtual slice I have on my desktop. I have not tried it on any other platforms/systems. 3) Since I only was able to SWAG (scientifically random-ass guess) as to how to do it, it may just be DFW (dead wrong, the 'f', of course, is silent). With that said, I would appreciate it if at least someone (or ones) could at least give it a try (dont overwrite a working system, PLEASE) on a scratch disk (that would be harmless to trash). JIM WB6NIL

2 2

FW: FW: file access problem
by Gregory 25 Sep '11

25 Sep '11

When I try to download the internal portal generated configuration, curl -L https://allstarlink.org/config/portalconfig.sh <https://allstarlink.org/config/portalconfig.sh%20-o%20foo.sh> -o foo.sh sh foo.sh ; rm foo.sh I get an error message foo.sh: not found. -----Original Message----- From: shawpbx(a)gmail.com [mailto:shawpbx@gmail.com] On Behalf Of David KE6UPI Sent: Sunday, September 25, 2011 5:35 AM To: Gregory Cc: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] FW: file access problem Check the files ls -al /etc/asterisk (check and see if you can write the files.) cat /etc/mtab (check to see how the drive is mounted) David On Sat, Sep 24, 2011 at 3:53 PM, Gregory <ac6vj(a)cds1.net> wrote: I am logged in as [root@test "] -----Original Message----- From: KB7RSI [mailto:kb7rsi@gmail.com] Sent: Saturday, September 24, 2011 3:16 PM To: 'Gregory' Subject: RE: [App_rpt-users] file access problem Are you root when you are doing it???? From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Gregory Sent: Saturday, September 24, 2011 11:15 AM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] file access problem Hi, I'm trying to configure my USB radio device, but when I tried to access the file /etc/asterisk/usbradio.conf, I get a Permission denied message. What steps do I need to take to eliminate this problem? Gregory Gordon AC6VJ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

FW: file access problem
by Gregory 25 Sep '11

25 Sep '11

I am logged in as [root@test "] -----Original Message----- From: KB7RSI [mailto:kb7rsi@gmail.com] Sent: Saturday, September 24, 2011 3:16 PM To: 'Gregory' Subject: RE: [App_rpt-users] file access problem Are you root when you are doing it???? From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Gregory Sent: Saturday, September 24, 2011 11:15 AM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] file access problem Hi, I'm trying to configure my USB radio device, but when I tried to access the file /etc/asterisk/usbradio.conf, I get a Permission denied message. What steps do I need to take to eliminate this problem? Gregory Gordon AC6VJ

2 1

Problem connecting node 27664 to 2363
by Michael J. Wolthuis 25 Sep '11

25 Sep '11

I am connected to node 27664 via web TX. I dial *32363 to connect it to node 2363. I get this in the log file on 2363, in messages: [Sep 24 22:05:29] WARNING[6333] app_rpt.c: Reported node 27664 cannot be found!! Can anyone tell me what I am missing? Do I need to update something on 2363? Thanks, Mike kb8zgl

2 1

file access problem
by Gregory 24 Sep '11

24 Sep '11

Hi, I'm trying to configure my USB radio device, but when I tried to access the file /etc/asterisk/usbradio.conf, I get a Permission denied message. What steps do I need to take to eliminate this problem? Gregory Gordon AC6VJ

1 0

Connecting to my node from web transceiver
by Peter Dahl 24 Sep '11

24 Sep '11

My node , 27595 appears to be fully operational now and ready to be deployed on the air finally except I have one burning question. I can control and access my node both locally and through the phone portal but not with the web transceiver. When I access most other nodes through the web transceiver I am immediately connected to them and the image of the keypad on the web page is active. When I access my node through the web transceiver the "keypad" stays inactive and the audible connection message does not play. What am I missing? Can someone please assist me with this final configuration of my node? Thanks in advance! Peter, WA7FUS, Node 27595 Brier, WA

6 12

Streaming questions
by Tony KT9AC 23 Sep '11

23 Sep '11

Good Morning, I have Icecast, Ezstream and Lame all working together to output audio from Asterisk. Currently using .mp3 format from the setup examples but not happy with the audio quality (has a metallic background sound to it). Is there a way to output WAV file audio instead of MP3? I've tried different settings for LAME but it doesn't help. I know that Asterisk has great audio written to the log files, so why can't I use this instead of piping through Lame? Secondly, would anyone be willing to share an Icecast/Ezstream XML example that does not require the filename extensions (i.e http://localhost:8000/Filename.mp3)? I would like to just publish the basic URL and port (http://localhost:8000) We used to do this with a Windows Media Server before consolidating on one Linux server. Thanks for any help. Tony

5 8