- App_rpt-users - lists.keekles.org

Registration Weirdness
by Tim Sawyer 28 Feb '11

28 Feb '11

My node 2530 is getting these messages. My address is 108.13.7.34 not 67.215.233.178. What's up with that? =========== Asterisk console messages ========== [Feb 27 16:35:55] NOTICE[2115]: chan_iax2.c:9712 socket_process: Registration of '2530' rejected: '<unknown>' from: '67.215.233.178' [Feb 27 16:37:07] NOTICE[2116]: chan_iax2.c:9712 socket_process: Registration of '2530' rejected: '<unknown>' from: '67.215.233.178' [Feb 27 16:37:37] NOTICE[2110]: chan_iax2.c:9712 socket_process: Registration of '2530' rejected: '<unknown>' from: '67.215.233.178' -- Registered IAX2 to '67.215.233.178', who sees us as 108.13.7.34:4568 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 108.13.7.34:4568 with no messages waiting ======== nslookup ======= nslookup 67.215.233.178 Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: 178.233.215.67.in-addr.arpa name = seal.lambdatel.com. -- Tim :wq

3 3

Unable to connect to AllStar
by VE3GIH Gord Hewit 27 Feb '11

27 Feb '11

I'm having a problem with a new server not connecting to Allstar. SSH is working. I can ping Google, both by IP and name, so DNS is ok. The router port for SSH TCP port is open and pointing to this server. Port 4569 UDP is open and pointing to this server. However, the nscheck.sh script shows Allstar servers 1 and 2 down, and then hangs until I press ^C. I can ping the Allstar servers, so I know they are there. Savenode.sh also fails to run properly. I haven't implemented any firewalls, or modified the stock configuration beyond the /etc/asterisk directory. Any suggestions on what I've missed? VE3GIH Gord Hewit 416-779-3740 (mobile)

4 3

Quad Radio PCI Card & Icom IC-F221s
by John (WB5NFC) 27 Feb '11

27 Feb '11

Is anyone else using a Quad Radio PCI Card with a pair of Icom IC-F221s configured as a repeater? I've worked my way through the need for a COS pull-up resistor, but I can't seem to get the audio right. After setting proper deviation, I hear what sounds like a lot of computer-generated hash on the transmitter and a 'ghost' signal from a local commercial broadcast station in the background. I suspect that one of my problems is not using shielded cable from the Quad Card to the ICOMs. I could not find the appropriate shielded cable locally, so I had hoped to get by by sacrificing an old twisted-pair jumper. I crimped on a new RJ-45 with the following pin-outs: ICOM Receiver Discriminator Audio (330 mVRMS @ 100 k ohms --> Pin 1Quad Radio RJ-45 ICOM Tramsmitter (Radio Modulation IN) (330mV RMS) --> Pin 7 Quad Radio RJ-45 ICOM PTT --> Pin 5 Quad Radio RJ-45 ICOM COS (when radio is properly programmed and a pull-up resistor is used) --> Pin 2 Quad Radio RJ-45 ICOM Ground --> Pin 8 RJ-45 RX de-emphasis jumper is enabled and the best results seem to be obtained with TX pre-emphasis enabled (even though it is not recommended). I will be ordering shielded cable for RJ-45s Monday, but is there anything else I have missed? Thanks for any suggestions. John / WB5NFC

2 1

Asterisk G7 Codec issue
by Ryan Collier 24 Feb '11

24 Feb '11

Hello Group, I have a corrupt codec and I was trying to fix the problem and I am not getting this error after recompile. editline/libedit.a(editline.o_a): In function `term_deletechars': /usr/src/astsrc/asterisk/main/editline/term.c:742: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:742: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:747: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:751: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:754: undefined reference to `tputs' editline/libedit.a(editline.o_a): In function `term_beep': /usr/src/astsrc/asterisk/main/editline/term.c:867: undefined reference to `tputs' editline/libedit.a(editline.o_a):/usr/src/astsrc/asterisk/main/editline/term.c:847: more undefi ned references to `tputs' follow editline/libedit.a(editline.o_a): In function `term_insertwrite': /usr/src/astsrc/asterisk/main/editline/term.c:783: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:783: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:790: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:798: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:800: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:805: undefined reference to `tputs' editline/libedit.a(editline.o_a):/usr/src/astsrc/asterisk/main/editline/term.c:813: more undefi ned references to `tputs' follow editline/libedit.a(editline.o_a): In function `term_move_to_char': /usr/src/astsrc/asterisk/main/editline/term.c:615: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:615: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:619: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:619: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:651: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:651: undefined reference to `tputs' editline/libedit.a(editline.o_a): In function `term_move_to_line': /usr/src/astsrc/asterisk/main/editline/term.c:562: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:562: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:575: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:575: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:580: undefined reference to `tputs' editline/libedit.a(editline.o_a): In function `term_echotc': /usr/src/astsrc/asterisk/main/editline/term.c:1498: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:1526: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:1526: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:1582: undefined reference to `tgoto' /usr/src/astsrc/asterisk/main/editline/term.c:1582: undefined reference to `tputs' /usr/src/astsrc/asterisk/main/editline/term.c:1447: undefined reference to `tgetstr' editline/libedit.a(editline.o_a): In function `term_set': /usr/src/astsrc/asterisk/main/editline/term.c:919: undefined reference to `tgetent' /usr/src/astsrc/asterisk/main/editline/term.c:937: undefined reference to `tgetflag' /usr/src/astsrc/asterisk/main/editline/term.c:938: undefined reference to `tgetflag' /usr/src/astsrc/asterisk/main/editline/term.c:940: undefined reference to `tgetflag' /usr/src/astsrc/asterisk/main/editline/term.c:941: undefined reference to `tgetflag' /usr/src/astsrc/asterisk/main/editline/term.c:943: undefined reference to `tgetflag' editline/libedit.a(editline.o_a):/usr/src/astsrc/asterisk/main/editline/term.c:944: more undefi ned references to `tgetflag' follow editline/libedit.a(editline.o_a): In function `term_set': /usr/src/astsrc/asterisk/main/editline/term.c:946: undefined reference to `tgetnum' /usr/src/astsrc/asterisk/main/editline/term.c:947: undefined reference to `tgetnum' /usr/src/astsrc/asterisk/main/editline/term.c:949: undefined reference to `tgetstr' collect2: ld returned 1 exit status make[1]: *** [asterisk] Error 1 make[1]: Leaving directory `/usr/src/astsrc/asterisk/main' make: *** [main] Error 2 I was trying to install alsaradio. Is this fixable or do I just need to start over? I am running tlb to asterisk and g7 codec sound bad here. 73 Ryan

2 1

Alsa/Serial Port
by Ryan Collier 24 Feb '11

24 Feb '11

Good Evening, I have been reading that there is support for Alsa and for serial port operation. Is there anything out there that tells how to get it to work? I found alsa config but hw do I get the chanel to start working? If this can happen then this will solve my problems till li can get to buying an usbfob. 73 Ryan K8PMY

1 0

Static IP Address
by KI6PSP (Ed) 22 Feb '11

22 Feb '11

Ok, I give. What file do I edit to set a Static IP. I have dug around a few linux boards, but I can't seem to find the correct file. I modified one file, but the system barfed on me, and didn't like the strings I put in. Can someone point me to the correct path, and possible show a sample file. This system also suffers from the "Sendmail Hang" because of the "resolve.conf". Once I get a static IP in, I can fix the resolve. Thanks -- KI6PSP (Ed)

2 1

Fwd: Re: Static IP Address
by Jon Rorke 22 Feb '11

22 Feb '11

-------- Original Message -------- Subject: Re: [App_rpt-users] Static IP Address Date: Tue, 22 Feb 2011 13:15:22 -0500 From: Jon Rorke <jrorke(a)cogeco.ca> Reply-To: jrorke(a)cogeco.ca To: app_rpt-users-request(a)qrvc.com Ok well you can edit the this file: /etc/sysconfig/network-scripts/ifcfg-eth0 Here is example of my box set for static on 10.0.0.3: > # Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit > Ethernet controller > DEVICE=eth0 > BOOTPROTO=none > HWADDR={your mac} > ONBOOT=yes > > TYPE=Ethernet > IPADDR=10.0.0.3 > NETMASK=255.0.0.0 > GATEWAY=10.0.0.1 Or you could type in "setup" at the prompt and use the tool to set the system for static ip. Then stop network service and restart or just reboot the box. In the resolve.conf I have the following: nameserver 208.67.222.222 nameserver 208.67.220.220 these are 'open DNS" servers that are not ISP specific. You can also use your ISP DNS numbers too. Jon VA3RQ On 2/22/2011 12:48 PM, KI6PSP (Ed) wrote: > Ok, I give. What file do I edit to set a Static IP. I have dug around > a few linux boards, but I can't seem to find the correct file. I > modified one file, but the system barfed on me, and didn't like the > strings I put in. > Can someone point me to the correct path, and possible show a sample > file. This system also suffers from the "Sendmail Hang" because of the > "resolve.conf". Once I get a static IP in, I can fix the resolve. > Thanks > > -- > KI6PSP (Ed) > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Node not showing up on active list
by K&R Yoksh 21 Feb '11

21 Feb '11

Node 2211 is still not showing up in the active nodes list. http://stats.allstarlink.org/ It does, however, show up green in the System-wide nodes list, and Web transceiver. Inbound and outbound calls seem to work 100%. Today I tried moving the node to another server and back. No change. I also wanted to try changing the passwordon the portal for 2211, but couldn't find a way to do that.Any more ideas? Thanks .73KyleK0KN--- Original Message ---Hello group, An odd thing happened a few days ago. One of my 6 nodes no longer appears on the Allstar active nodes list http://stats.allstarlink.org/ Nothing has changed on my end. I've made sure that the stanza for node status reporting is uncommented in rpt.conf. This server is running 3 nodes, 2210-2212 and 2210,2212 show up. The node reporting stanzas are identical on all 3 nodes. I can use 2211 as before, it will successfully connect to other stations, etc, but does not display correctly if connected to another station. For example, I connected 2211 to my node 2215. Node 2211 appears to be a non-standard node. See URL: http://stats.allstarlink.org/nodeinfo.cgi?node=2215 Any ideas? I'm stumped. Thanks. 73 Kyle K0KN

2 1

boot problem
by REDBUTTON_CTRL 21 Feb '11

21 Feb '11

Hi All, having a problem on one of my nodes. If I reboot the node, it starts going through the services and hangs at sendmail for about 2- 3 min then continues to sh-client, hangs again and then smartd. After a while it finally finishes. Any ideas as to what might be the problem? Thanks, Jon VA3RQ

3 3

Re: [App_rpt-users] Beagleboard and USB URI dongle
by Steve Gladden 20 Feb '11

20 Feb '11

OK, looking back through my old notes I have a note that mentions that the audio drop occurs *sometimes* while apt_rpt is doing it's HTTP data reporting to allstarlink.. This is *still* happening but not all the time or consistently.. But sometimes and very noticeably the audio pops occur at the same time app_rpt sends it's stats. I did however recently find another test where I can cause the audio dropout to occur about 90% of the time which is far more consistent than waiting for app_rpt to do it's stat push. By running hdparm -t In my case it's: hdparm -t /dev/ida/c0d0p1 Just as the program exits it makes the audio popping.. *almost* every time. Oddly ad frustratingly it's *almost* every time.. Not really sure why 10% of the time it doesn't happen.. But be come kind of narrow timing window thing going on here. But *where*? Especially if you wait 5-10 seconds (or more) before running it again. This is the ONLY way in 2 years I've been able to induce the popping myself from a test. Otherwise it happens randomly as mentioned previously. A couple quick related notes is that the problem does *not* occur when running hdparm -T instead (buffer speed test) Nor when you manually flush the drive cache by running the sync command. Other activities that test the hard drive (large file copies etc.) do not induce the problem. That test is on a SCSI RAID5 array server.. Not tried it on a plain jane IDE system yet hdparm -t /dev/ida/c0d0p1 (Makes 3-4 definite audio pops in succession on exit) /dev/ida/c0d0p1: Timing buffered disk reads: 72 MB in 3.06 seconds = 23.56 MB/sec [root@MBB001 ~]# [root@MBB001 ~]# [root@MBB001 ~]# [root@MBB001 ~]# hdparm -T /dev/ida/c0d0p1 /dev/ida/c0d0p1: (no pops EVER) Timing cached reads: 776 MB in 2.00 seconds = 388.05 MB/sec -Steve > Hi Chuck.. > > My box (pretty much a fresh ACID install) does not even have NTPD > running on it. > > What I did try was running the heck out of ntpdate which has absolutely > no effect whatsoever on the audio as it does it's thing syncing the clock. > > I've done a LOT of other 'similar' tests like this over the past year > trying to find something that influences the behavior or induces it to > occur. > > While I was at it I also ran <hwclock --systohc> just for kicks. > > Again about anything I can think of does not cause the issue to surface.. > It just does it on it's own seemingly randomly. > > In it's little subtle irritating way :-) > > And just for convenience... a video from Nov 14 2009. > > Radio Key command listening to PL and the issue. :-) > > > http://www.youtube.com/watch?v=lqYwhtuVLDs > > > > -Steve > > > > > > > > >> Why not run ntpd and keep your clock in sync all the time instead of >> once an hour :) >> >> Jim, K6JWN >> >> On Thu, Feb 17, 2011 at 01:09:17AM -0600, Chuck Henderson >> <rpt2(a)chuck.midlandsnetworking.com> said: >> >>> When I started using this software I noticed the audio issues in my >>> test >>> environment. I tried a dozen different mothertboard/CPU combinations >>> and 3 >>> different USB fobs. I found that the faster the system the >>> less noticeable the issues but even a 3.4 GHZ quad core still had the >>> issues. I experimented with a lot of variables and several things made >>> some >>> difference but the single most significant thing that reduced the issue >>> was stopping ntpd. I now run ntpdate 40 seconds after the hour, every >>> hour. >>> This keeps the date and time close enough and greatly reduces the >>> audio >>> glitch like sounds that I was noticing. Also I found that when the >>> system >>> is not under test and is using real hand held and mobile stations >>> working >>> through the repeater that the remaining audio glitch like sounds >>> are indistinguishable from typical normal radio noise hits. By the >>> way, >>> my >>> final choice for a system board is the D510MO. >>> While I do not know for sure, I suspect that when ntpd makes tiny >>> adjustments to the system time, this results in tiny glitches in the >>> processing in the USB sound system. I am clueless how to track it down >>> any >>> further, and do not see any need. >>> Chuck >> >> -- >> This message has been scanned for viruses and >> dangerous content by MailScanner, and is >> believed to be clean. >> > > > Michigan Broadband Systems Inc. > "Always Connected" > > (734)527-7150 > > Steve's cellphone: (734)904-1811 > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > Michigan Broadband Systems Inc. "Always Connected" (734)527-7150 Steve's cellphone: (734)904-1811 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 3