- App_rpt-users - lists.keekles.org

no receive audio in iaxRpt
by Steve Gebhard 23 Jul '09

23 Jul '09

> > From: "Dale J. Robertson" <dale at nap.us.com> > Date: 2009/07/22 Wed PM 01:25:33 PDT > To: App_rpt-users at qrvc.com > Subject: [App_rpt-users] no receive audio in iaxRpt > > Hello, > I am slowly but surely bringing up a remote Kenwood TS2000 using Limey > linux with a URI > I have successfully gone through the steps in the wiki to get the rx > audio adjusted. > iax-Rpt seems to be configured correctly and has no trouble connecting > to my node. > transmit control seems to be working as expected i.e. it properly keys > up the rig. > have not yet checked tx audio or deviation. > I am using the COR output from the kenwood. it is open collector and > active low. > (measured 0.6 volts when receiver squelch is open 5.01 volts closed) > everything looks like it should be working, But, for the life of me I > have not been able to get any receive audio on the iaxRpt windows client. > Win machine is XP sp3 on the same subnet as the limey box. there is an > exception for iaxRpt in the windows firewall setup. tried with the > firewall turned off there is still no audio. > my usbradio.conf looks like this: > ; > ; Open Sound System Console Driver Configuration File > ; > [general] > > [usb] > > hdwtype=0 ; Leave this set to 0 for USB sound fobs > modified using > ; the instructions from usbfob.pdf. Use a setting of > ; 1 is for Dingotel/Sph interfaces. > > rxboost=1 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed > ; Set to 1 for additonal gain if using a > low-level receiver output > > rxctcssrelax=1 ; reduce talkoff from radios w/o CTCSS Tx HPF > ; Do not change this, leave this as a 1 > > txctcssdefault=100.0 ; default tx ctcss freq, any frequency permitted > rxctcssfreqs=100.0 ; rx ctcss freqs in floating point. must be in table > txctcssfreqs=100.0 ; tx ctcss freqs, any frequency permitted > > carrierfrom=usbinvert ; no,usb,usbinvert,dsp,vox > ; no - no carrier detection at all > ; usb - from the COR line on the modified USB > sound fob > ; usbinvert - from the inverted COR line on the > modified USB sound fob > ; dsp - from RX noise using dsp techniques > ; vox - voice activated from RX audio > > ctcssfrom=no ; no,usb,dsp > ; no - CTCSS decoding, system will be carrier > squelch > ; usb - CTCSS decoding using input from USB FOB > ; (currently not supported) > ; dsp - CTCSS decoding using RX audio in DSP. > ; rxdemod option must be set to flat for this to > work. > > rxdemod=flat ; input type from radio: no,speaker,flat > ; no - RX audio input not used > ; flat - Use RX audio from discriminator > ; speaker - use de-emphasized audio > > txprelim=yes ; Audio processing on left output channel: no,yes > ; no - Audio is not pre-emphasized and limited. > ; Suitable for use on a microphone input > ; yes - Audio is pre-emphasized and limited. > ; Suitable for direct connection to an FM modulator > > txtoctype=no ; Transmit tone control type: no,phase,notone > ; no - CTCSS tone encoding with no hang time > ; phase - encode CTCSS and reverse phase > ; AKA ("reverse burst") before unkeying TX > ; notone - encode CTCSS and stop sending tone > before unkeying TX > ; AKA ("chicken burst") > > txmixa=voice ; Left channel output: > no,voice,tone,composite,auxvoice > ; no - Do not output anything > ; voice - output voice only > ; tone - CTCSS tone only > ; composite - voice and tone > ; auxvoice - auxiliary voice output at headphone > level for monitoring > > txmixb=no ; Right channel output: no,voice,tone,composite, > auxvoice > ; See txmixa above. > > invertptt=0 ; Invert PTT 0 = ground to transmit, 1 = open to > transmit > ; This is the collector lead of the 2n4401 on > the modified > ; usb sound fob. > ; please refer to the howto for the procedure to > do this. > > duplex=1 ; Full Duplex > > can anyone tell me what I am doing wrong? > > Regards, > Dale NV8U > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users > It should work after commenting these lines out: txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 With CTCSS set to no, you'd think commenting these is not required, but it is (at least for now). Steve WA6ZFT Dale, if you are using a DMK URI, invert the txmixa and txmixb settings. that URI defaults TX audio to channel B, I had the same problem. 73's Steve WB9STH

1 0

Re: [App_rpt-users] no receive audio in iaxRpt
by hwstar＠rodgers.sdcoxmail.com 22 Jul '09

22 Jul '09

> > From: "Dale J. Robertson" <dale(a)nap.us.com> > Date: 2009/07/22 Wed PM 01:25:33 PDT > To: App_rpt-users(a)qrvc.com > Subject: [App_rpt-users] no receive audio in iaxRpt > > Hello, > I am slowly but surely bringing up a remote Kenwood TS2000 using Limey > linux with a URI > I have successfully gone through the steps in the wiki to get the rx > audio adjusted. > iax-Rpt seems to be configured correctly and has no trouble connecting > to my node. > transmit control seems to be working as expected i.e. it properly keys > up the rig. > have not yet checked tx audio or deviation. > I am using the COR output from the kenwood. it is open collector and > active low. > (measured 0.6 volts when receiver squelch is open 5.01 volts closed) > everything looks like it should be working, But, for the life of me I > have not been able to get any receive audio on the iaxRpt windows client. > Win machine is XP sp3 on the same subnet as the limey box. there is an > exception for iaxRpt in the windows firewall setup. tried with the > firewall turned off there is still no audio. > my usbradio.conf looks like this: > ; > ; Open Sound System Console Driver Configuration File > ; > [general] > > [usb] > > hdwtype=0 ; Leave this set to 0 for USB sound fobs > modified using > ; the instructions from usbfob.pdf. Use a setting of > ; 1 is for Dingotel/Sph interfaces. > > rxboost=1 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed > ; Set to 1 for additonal gain if using a > low-level receiver output > > rxctcssrelax=1 ; reduce talkoff from radios w/o CTCSS Tx HPF > ; Do not change this, leave this as a 1 > > txctcssdefault=100.0 ; default tx ctcss freq, any frequency permitted > rxctcssfreqs=100.0 ; rx ctcss freqs in floating point. must be in table > txctcssfreqs=100.0 ; tx ctcss freqs, any frequency permitted > > carrierfrom=usbinvert ; no,usb,usbinvert,dsp,vox > ; no - no carrier detection at all > ; usb - from the COR line on the modified USB > sound fob > ; usbinvert - from the inverted COR line on the > modified USB sound fob > ; dsp - from RX noise using dsp techniques > ; vox - voice activated from RX audio > > ctcssfrom=no ; no,usb,dsp > ; no - CTCSS decoding, system will be carrier > squelch > ; usb - CTCSS decoding using input from USB FOB > ; (currently not supported) > ; dsp - CTCSS decoding using RX audio in DSP. > ; rxdemod option must be set to flat for this to > work. > > rxdemod=flat ; input type from radio: no,speaker,flat > ; no - RX audio input not used > ; flat - Use RX audio from discriminator > ; speaker - use de-emphasized audio > > txprelim=yes ; Audio processing on left output channel: no,yes > ; no - Audio is not pre-emphasized and limited. > ; Suitable for use on a microphone input > ; yes - Audio is pre-emphasized and limited. > ; Suitable for direct connection to an FM modulator > > txtoctype=no ; Transmit tone control type: no,phase,notone > ; no - CTCSS tone encoding with no hang time > ; phase - encode CTCSS and reverse phase > ; AKA ("reverse burst") before unkeying TX > ; notone - encode CTCSS and stop sending tone > before unkeying TX > ; AKA ("chicken burst") > > txmixa=voice ; Left channel output: > no,voice,tone,composite,auxvoice > ; no - Do not output anything > ; voice - output voice only > ; tone - CTCSS tone only > ; composite - voice and tone > ; auxvoice - auxiliary voice output at headphone > level for monitoring > > txmixb=no ; Right channel output: no,voice,tone,composite, > auxvoice > ; See txmixa above. > > invertptt=0 ; Invert PTT 0 = ground to transmit, 1 = open to > transmit > ; This is the collector lead of the 2n4401 on > the modified > ; usb sound fob. > ; please refer to the howto for the procedure to > do this. > > duplex=1 ; Full Duplex > > can anyone tell me what I am doing wrong? > > Regards, > Dale NV8U > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users > It should work after commenting these lines out: txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 With CTCSS set to no, you'd think commenting these is not required, but it is (at least for now). Steve WA6ZFT

1 0

no receive audio in iaxRpt
by Dale J. Robertson 22 Jul '09

22 Jul '09

Hello, I am slowly but surely bringing up a remote Kenwood TS2000 using Limey linux with a URI I have successfully gone through the steps in the wiki to get the rx audio adjusted. iax-Rpt seems to be configured correctly and has no trouble connecting to my node. transmit control seems to be working as expected i.e. it properly keys up the rig. have not yet checked tx audio or deviation. I am using the COR output from the kenwood. it is open collector and active low. (measured 0.6 volts when receiver squelch is open 5.01 volts closed) everything looks like it should be working, But, for the life of me I have not been able to get any receive audio on the iaxRpt windows client. Win machine is XP sp3 on the same subnet as the limey box. there is an exception for iaxRpt in the windows firewall setup. tried with the firewall turned off there is still no audio. my usbradio.conf looks like this: ; ; Open Sound System Console Driver Configuration File ; [general] [usb] hdwtype=0 ; Leave this set to 0 for USB sound fobs modified using ; the instructions from usbfob.pdf. Use a setting of ; 1 is for Dingotel/Sph interfaces. rxboost=1 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed ; Set to 1 for additonal gain if using a low-level receiver output rxctcssrelax=1 ; reduce talkoff from radios w/o CTCSS Tx HPF ; Do not change this, leave this as a 1 txctcssdefault=100.0 ; default tx ctcss freq, any frequency permitted rxctcssfreqs=100.0 ; rx ctcss freqs in floating point. must be in table txctcssfreqs=100.0 ; tx ctcss freqs, any frequency permitted carrierfrom=usbinvert ; no,usb,usbinvert,dsp,vox ; no - no carrier detection at all ; usb - from the COR line on the modified USB sound fob ; usbinvert - from the inverted COR line on the modified USB sound fob ; dsp - from RX noise using dsp techniques ; vox - voice activated from RX audio ctcssfrom=no ; no,usb,dsp ; no - CTCSS decoding, system will be carrier squelch ; usb - CTCSS decoding using input from USB FOB ; (currently not supported) ; dsp - CTCSS decoding using RX audio in DSP. ; rxdemod option must be set to flat for this to work. rxdemod=flat ; input type from radio: no,speaker,flat ; no - RX audio input not used ; flat - Use RX audio from discriminator ; speaker - use de-emphasized audio txprelim=yes ; Audio processing on left output channel: no,yes ; no - Audio is not pre-emphasized and limited. ; Suitable for use on a microphone input ; yes - Audio is pre-emphasized and limited. ; Suitable for direct connection to an FM modulator txtoctype=no ; Transmit tone control type: no,phase,notone ; no - CTCSS tone encoding with no hang time ; phase - encode CTCSS and reverse phase ; AKA ("reverse burst") before unkeying TX ; notone - encode CTCSS and stop sending tone before unkeying TX ; AKA ("chicken burst") txmixa=voice ; Left channel output: no,voice,tone,composite,auxvoice ; no - Do not output anything ; voice - output voice only ; tone - CTCSS tone only ; composite - voice and tone ; auxvoice - auxiliary voice output at headphone level for monitoring txmixb=no ; Right channel output: no,voice,tone,composite, auxvoice ; See txmixa above. invertptt=0 ; Invert PTT 0 = ground to transmit, 1 = open to transmit ; This is the collector lead of the 2n4401 on the modified ; usb sound fob. ; please refer to the howto for the procedure to do this. duplex=1 ; Full Duplex can anyone tell me what I am doing wrong? Regards, Dale NV8U

1 0

radio tune
by Eagle Link Customer Service 21 Jul '09

21 Jul '09

Ok, I'm having sme trouble tuning the rxnoise, but I think I know why. I'm using a Motoroa Radius setup, and although the accessory pin output is discriminator, It is muted with the squelch on the radio. Does anybdy know a way around this? Is there a way to keep that pin from being muted? The ther option, which I can't seem to find info on, is simply using the cor pin. How would I go about configuring a node for COR. And my last dumb question... For the moment I'm trying to set this up without alstarlink. How should I set this up so it's not trying to connect to allstarink? Ok, now for the background of the setup because I know people are going to ask. I'm using the ACID install with a modified CM108 USB device. I hooked the device up to a Windows PC to test the audio. I could indeed hear (by raising the MIC volume all the way up) audio from the radio, but no noise when there is no transmission. That's how I know it's muted with the squelch on the radio. I could also play a sund clip I recorded over the radio if I held the PTT key on the mic. So I know the audio is all working. And in asterisk CLI I did "radio tune txvoice" and the radio keyed up perfectly fine and transmitted the tone. So all I have left is to figure out how to get the raw unsquelched noise, or use the COR line from the radio. As for the radio, if there are any motorola peple here, I d have the software and a home made cable that works. So I have gone into the accessory config and changed the pin setup to fit my needs. Figured I'd throw that in before anybody asks. If you get a used radiio you never know what the last person did with the config. Thanks, Jeff

2 1

Latest Version of ACID
by Stu2 18 Jul '09

18 Jul '09

Where is the latest version of ACID? I found the download at: http://app-rpt.qrvc.com/node/5 But the image doesn't boot. When I look around on the disk, it appears to be based on Centos 5.1. However, scanning around on the web site for install instructions, I see references to 5.2 and 5.3. So I think I'm looking in the wrong area. Thanks Stu W7IY

2 2

Macros?
by John Bettasso 17 Jul '09

17 Jul '09

What is the magic to get macros to work? In my functions sections I have the following: 83=macro,1 In my macro's section I have: 1=*81*82 but when I type 'rpt fun 1999 *83' in the CLI nothing happens. but when I type 'rpt fun 1999 *81*82' in the CLI it executes both of those commands. Thanks, John

2 3

connect greeting
by James Nessen 15 Jul '09

15 Jul '09

this may have been asked before (and I may have been the one who asked), but how can I go about getting a custom connect greeting to play instead of the standard n o d e 2 1 6 5 , etc? Jim -- Jim Nessen K6JWN Email: nessenj(a)jimsoffice.org | Ph: 530.979.0894 IRLP: Node 3598 | Echolink: 83598 K6JWN-R | AllStar: Node 2165

3 4

Re: [App_rpt-users] CM108 modification
by Eagle Link Customer Service 10 Jul '09

10 Jul '09

Ok, now I feel stupid, lol. After looking at the board a little more I realized it was a simple mistake I made. In the pdf file it shows the RX Audio wire going to the mic connector soldered to the center pin closest to the edge of the board. On the adapter I have, because it's all surface mount, there is a connection on both sides of the connector, so I soldered to the outside one like the picture showed. Unfortunately, there's really no connection there, it's just a solder pad to hold down that side of the connector. So after resoldering the wire to the inside middle connection all seems to be well. Jeff WQEX694 KB1SPH

1 0

Re: [App_rpt-users] CM108 modification
by Eagle Link Customer Service 10 Jul '09

10 Jul '09

Ok, I've got a problem with the audio coming into the usb adapter. I've made the circuit according to the schematic not the picture. I was testing it hooked up to a windows computer and I could play a sound clip I recorded and it transmitted the audio. But when I was trying to receive audio from another radio while recording in sound recorder I got nothing. The audio is coming out of the accessory connector (RX Audio Pin 11) on a Motorola Radius M208, could it be that the audio level is too low? Jeff WQEX694 KB1SPH

1 0

No TX DTMF on iaxrpt
by Bruce Forestal 09 Jul '09

09 Jul '09

I've been working with iaxrpt on a laptop running Win2K and a Mac running Fusion/Win2k. I've got TX/RX audio and PTT working on both but I can't seem to get the DTMF to pass over the network to the Asterisk node. I can hear the DTMF tones coming out the local laptop speaker. I am using the alt-number keys to generate DTMF. Also the DTMF keypad does not generate tones although I can see the text appear below the pad so I know at least clicking the pad keys with the mouse is working. Thanks, Bruce Forestal wb6are(a)gmail.com

2 1