- App_rpt-users - lists.keekles.org

Re: [App_rpt] iaxRpt on Linux and Mac
by Tony Langdon, VK3JED 19 Aug '08

19 Aug '08

At 11:20 AM 8/20/2008, you wrote: >We are glad to report that iaxRpt runs under the Wine emulator on >Linux and Mac. I've been using it under Wine on an EeePC 900 for some time. 73 de VK3JED http://vkradio.com

1 0

[App_rpt] iaxRpt on Linux and Mac
by Steven Henke 19 Aug '08

19 Aug '08

We are glad to report that iaxRpt runs under the Wine emulator on Linux and Mac. Here are some details and screen shots. http://www.xelatec.com/xipar/iaxrptlinmac Thanks to Dave, VE7MQ and Alex in the Xelatec Lab. 73, Steven Henke, W9SH(a)xelatec.com P.S. Official ports to those platforms are still on the "To Do" list but this should help until then.

1 0

Re: [App_rpt] registering with 3 nodes?
by hwstar＠rodgers.sdcoxmail.com 19 Aug '08

19 Aug '08

The should now. Fixed addressing overrides reqistration. Your two nodes 2142 and 2165 had an FQDN. I removed the FQDN's from the Allstar database and now the registered IP addresses should propagate in the next hour or so. Steve WA6ZFT > > From: James Nessen <nessenj(a)jimsoffice.org> > Date: 2008/08/19 Tue PM 03:04:10 PDT > To: Asterisk Repeater Controler <app_rpt(a)lists.illiana.net> > Subject: [App_rpt] registering with 3 nodes? > > My asterisk installation (ACID) is running with 3 nodes on it, and in > my iax.conf, I have 3 register lines (one for each node), however when > I look at rpt_extnodes on my node and a remote node, it seems like the > last entry is getting updated with the correct IP, and the first 2 > don't get updated at all. > > iax2 show registry shows that all 3 nodes are registered. Any ideas? > > Nodes in question are 2142, 2165 and 2191 - all on a single host. > > Jim / K6JWN > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt >

2 1

[App_rpt] registering with 3 nodes?
by James Nessen 19 Aug '08

19 Aug '08

My asterisk installation (ACID) is running with 3 nodes on it, and in my iax.conf, I have 3 register lines (one for each node), however when I look at rpt_extnodes on my node and a remote node, it seems like the last entry is getting updated with the correct IP, and the first 2 don't get updated at all. iax2 show registry shows that all 3 nodes are registered. Any ideas? Nodes in question are 2142, 2165 and 2191 - all on a single host. Jim / K6JWN

1 0

[App_rpt] iaxRpt Running on Linux and Mac
by Steven Henke 19 Aug '08

19 Aug '08

We are glad to report that iaxRpt runs under the Wine emulator on Linux and Mac. Here are some details and screen shots. http://www.xelatec.com/xipar/iaxrptlinmac Thanks to Dave, VE7MQ and Alex in the Xelatec Lab. 73, Steven Henke, W9SH P.S. Official ports to those platforms are still on the "To Do" list but this should help until then.

1 0

[App_rpt] Question: Remote base conference capability
by David McGough 19 Aug '08

19 Aug '08

Hi Everyone, I am wondering if there is an easy way to enable conference capability for remote base nodes? --I wish to have potentially several "standard" nodes connected to one remote base (or other similar configs). I saw that this capability isn't allowed in the ACID sysadmin manual, but, would like to try it anyway if possible without too much hacking.... Thanks! David KB4FXC

2 4

[App_rpt] Simplex node with just RXAud/TXAud/PTT ?
by Chad Palm 12 Aug '08

12 Aug '08

I believe I am looking for a configuration similar to what you've got going on, simplex base control: one asterisk box at location A, with a motorola GM300 through USB soundcard FOB and another identical setup at location B. When a portable at A transmits on the channel the GM300 is on, I want the audio to cross over IAX2/GSM and open up the radio at site B, transmitting to portables at that site.. the same process should happen in reverse for traffic from B. I've read it's dangerous to use mobile radios above a 10% transmission duty cycle due to heat, so I think CTCSS/DCS between the portables and their (local) base is the best way to prevent that.. meaning I want VOX control between the asterisk boxes right? Any comments or suggestions you may have would definitely be appreciated! ChadP

3 2

[App_rpt] Suggested GMRS (or inexpensive UHF transceiver) for use with USB Sound Card FOB
by Chad Palm 08 Aug '08

08 Aug '08

Greetings, I am a long-time asterisk user recently "tuned-in" to TIARA (app_rpt). I'm considering acquiring a GMRS license and using this project to repeat handheld traffic to immediate family in a seperate geographical location. I've read up on the USB Sound Card FOB and am curious if anyone has successfully wired-up inexpensive GMRS handhelds to it and could possibly recommend a good model to work with? Here's the simplex repeater scenario I'm considering: PIII 800 running EasyVoxBox at each location trunked on IAX2, with USB Sound Card FOB wired to a low power (1/2W) GMRS portable. When one location recieves traffic on GMRS channel from portables in range, it's relayed across to the conterpart asterisk and then transmitted from the FOB/portable out to portables near its location. Question - would CTCSS encoding carry across the link, or do I need to decode and discriminate at each end? Any thoughts on this approach - your feedback is truly appreciated! Cheers, ChadP

1 0

[App_rpt] installing from EVB 013
by Guillaume Devoyon 07 Aug '08

07 Aug '08

Hello, Is there some recommands installing from EVB 0.013 ? Is evbphase2 is actual ? Looking on evbphase2 script i adapted it to 0.013 distro but it say that it was already configured : --------------------------------------------------------------------- evbphase2(0.29) - EasyVoxBox(EVB) w/app_rpt. Install phase 2 started. Requires EVB 0.010, 0.011 or 0.013. NOTICE: EVB appears to have been previously installed. This previous installation will not be replaced. -- ----------------------------------------------------------- that mean that i have /etc/EVB/EVB1first filled with the word "complete". Is it normal...? is 0.013 include evbphase2 ? regards Guillaume f8arr Ce mail est envoyé depuis un compte gmail temporaire. Pour être lu rapidement, veuillez envoyer un mail à mon adresse permanente : guillaume.devoyon(a)f8arr.org. -- Ce mail est envoyé depuis un compte gmail temporaire. Pour être lu rapidement, veuillez envoyer un mail à mon adresse permanente : guillaume.devoyon(a)f8arr.org.

3 3

[App_rpt] chan_rtpdir warning for Xelatec Asterisk/EVB/app_rpt systems
by Steven Henke 03 Aug '08

03 Aug '08

Hi All, I recommend that if you have a working Xelatec Asterisk/EVB/app_rpt system that you do not attempt to install chan_rtpdir. Please wait until the update script can install it for you. I'm working on that this weekend but no promises. If you can't wait, well, good luck! 73, Steve Henke, W9SH

3 2