- App_rpt-users - lists.keekles.org

[App_rpt] test message
by Stephen Rodgers 29 Apr '07

29 Apr '07

This is a test, please ignore

1 0

[App_rpt] dayton
by Eric Fort 23 Apr '07

23 Apr '07

will there be a functional app_rpt node at dayton this year? would be nice to have an allstarlink node to communicate with others there. Eric

2 1

[App_rpt] how much processor and memory are needed
by Eric Fort 22 Apr '07

22 Apr '07

What hardware specs would be recomended for an app-rpt box containing the following: 1 - quad pci radio card 1 - tdm-400 fully populated 1 - voip autopatch 1 - sip telephone attached 3 - conferences (yes this eats processor) links to other allstar nodes Eric

2 3

[App_rpt] No courtesy tone from link
by Bob Peret 16 Apr '07

16 Apr '07

Hello Group. I am currently running asterisk 1.4 and the latest app_rpt code on some custom HW (ADI Blackfin). All seems to be working well. I have two zaptel channels configured to talk to the custom repeater ports. There is a full duplex UHF repeater on Zaptel/1 and a half duplex link radio on Zaptel/2. When I link them the I do not get a courtesy tone on the main repeater when someone on the link releases PTT. Is this normal? I had to write my own Zaptel driver to control the HW so maybe I missed handling of a signal or something. If I knew that this worked on other setups it would help me determine where my issue is. Thanks, Bob Peret (KD6LFW)

2 1

[App_rpt] Browsing the new source code repository
by Stephen Rodgers 01 Apr '07

01 Apr '07

To the members of the app_rpt mailing list: The latest configuration files and app_rpt source can be downloaded from : https://sv.qrvc.com/viewvc. Here are the useful directories: app_rpt : for the latest app_rpt.c source file pciradio : for the latest quad radio pci card zaptel driver configfiles : for the latest app_rpt.conf file rpt-sounds : for the latest sounds file tarball. scripts : for the allstar automatic node update script limey-linux : for the sources to build the limey linux distribution ll_ast : for the latest version of asterisk and config files to use with limey linux mdc-1200 : for the latest MDC 1200 support files iaxrpt : for the iaxrpt source files Please note: This repository is used to support the development process and anything downloaded from here should be thoroughly tested before being relied upon. however, if you need the latest and greatest version to support a new feature, this is the place to get it. Please note that the repository is for the use of app_rpt list members only at this time. Please do not post a link to it on any website as resources and bandwidth are limited. Steve Rodgers WA6ZFT

1 0

[App_rpt] ASTERISKNOW, pciradio and apt-rpt
by f1shs 17 Mar '07

17 Mar '07

Hello all ;-) I'm allready starting a appliance with a pciradio and app-rpt. I've tried ubuntu, fedora 4, debian with allways a problem to compile the zaptel driver. I'm not a geek and i think i've some issue to understand how linux work's ... But now, as i'm trying asterisknow, i've found something working better. I've installed it into a dedicated server. I've tried to launch asis the pciradio card with "modprobe pciradio" and it's working. But i have'nt seen anything like app-rpt.so module in CLI console. I've many trouble to launch something working. Can you explain what is the best procedure to install asterisk with app-rpt please ? Or somebody could explain how managing the app-rpt in asterisknow ? Best regard's Pierre

3 2

Re: [App_rpt] Remote Base
by David Craig 12 Mar '07

12 Mar '07

Can App_rpt be used with an ATA for a simplex or half duplex remote base. The example might be an Grandstream HandyTone 286 with the FXS port connected ARIB. I have a situation where I need a very small radio interface and my asterisk box will be remote via a high speed connection. Thanks for any help. David

5 9

[App_rpt] app_rpt mailing list back up
by Stephen Rodgers 09 Mar '07

09 Mar '07

The list is back up courtesy of Bryan. Steve Rodgers, WA6ZFT

1 0

[App_rpt] Asterisk software update to 1.4 CVN
by Will Wright 24 Feb '07

24 Feb '07

Steve or Jim, If possible, could someone show me how to update to Asterisk 1.4? Or would one of you like to check into my system and run the updated? I am still running version 49 and believe I'm missing out on some of the improvements to the app_rpt applications. If you cannot not please direct me to the howto's to follow and I will attempt the update. Thanks and I appreciation your time in advance. Will / W4WWM

2 1

[App_rpt] Setting up a simplex node
by Stephen Brown Jr 06 Feb '07

06 Feb '07

Hi, I've been lurking on this list for quite some time and I am extremely interested in setting up a simplex node to start playing with this. What exactly will I need besides the obvious(radio, computer, etc), I am little confused on what type of FXS card I will need just for a single radio, all the ones I have seen are fairly pricey. I will then need an ARIB board to interface the radio to the FXS card correct? tnx and 73's Stephen N1VLV

2 3