Hello dear friends!
I'm using a PCI Quad Radio card with a Motorola EM400 radio pluged in. I can
use a SIP phone to connect to the node (1999) and issue the PTT command
(*98) and deactivate it (#). I want to be able to listen to this channel
when I dial to the node but when I ask for the Link status (*7), all I
receive on the phone and on the remote radio is "node 1999 repeat_only". I
tried the duplex=2 option but it didnt work either.
Thanks in avance.
My rpt.conf:
;
; Your repeater
;
[1999] ; Name of First Repeater
rxchannel = Zap/1 ; Rx audio/signalling channel
; Note: if you use a unified interface (tx/rx on one channel), only
; specify the rxchannel and the txchannel will be assumed from the rxchannel
;rxnotch=1065,40 ; Notch a particular frequency,
depth
; app_rpt must have been compiled
with
; the notch option
duplex=2
functions=functions ; Repeater Function Table
link_functions=link-functions ; Link Function Table
phone_functions=functions ; Phone Function table (reverse
patch)
telemetry=telemetry ; Telemetry descriptions
wait_times=wait-times ; Wait times
context = radio ; dialing context for phone
callerid = "Your Repeater" <6198192562> ; callerid for phone calls
idrecording = /etc/asterisk/id ; id recording
accountcode=RADIO ; account code (optional)
hangtime=100 ; squelch tail hang time (in ms)
(optional)
totime=180000 ; transmit time-out time (in ms)
(optional)
idtime=300000 ; id interval time (in ms)
(optional)
; The default values for hangtime, time-out time, and id interval time are
; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
; respectively
politeid=30000 ; time in milliseconds before ID
timer
; expires to try and ID in the tail.
; (optional, default is 30000).
idtalkover=|iid/r ; Talkover ID (optional) default is
none
unlinkedct=ct2 ; unlinked courtesy tone (optional)
default is none
[functions]
1=ilink,1 ; Specific link disconnect
2=ilink,2 ; Specific Link connect - monitor
only
3=ilink,3 ; Specific Link connect - transceive
4=ilink,4 ; Enter command mode on a specific
link
5=macro,1 ; Command macros (Defined in the
macro section)
7=ilink,5 ; Link status
984=ilink,7 ; Last node to key us up
80=status,1 ; System info
81=status,2 ; Time
82=status,3 ; app_rpt.c Version
87=ilink,15 ; Global node query (all nodes in
network)
6=autopatchup
0=autopatchdn ; Autopatch down
; Control operator commands
919296=cop,1 ; System warm boot
919297=cop,2 ; System enable
919298=cop,3 ; System disable
99=cop,4 ; Audio test tone
98=cop,6 ; Telephone key PTT
[link-functions]
1=ilink,1 ; Specific link disconnect
2=ilink,2 ; Specific Link connect - monitor
only
3=ilink,3 ; Specific Link connect - transceive
5=macro,1 ; Command macros (Defined in the
macro section)
7=ilink,5 ; Link status
80=status,1 ; System info
81=status,2 ; Time
82=status,3 ; app_rpt.c Version
87=ilink,15 ; Global node query (all nodes in
network)
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
0=autopatchdn ; Autopatch down
[nodes]
1999 = radio(a)127.0.0.1/1999,NONE ; This must be changed to your node
number
