December 2013 - App_rpt-users - lists.keekles.org

Latitude/longitude
by zeppelin.1＠netzero.com 27 Dec '13

27 Dec '13

Hello to all, attempting to set up the node lat and long on the All Star link portal using ie7, ie8 and Safary with no success. Any suggestions? Thanks Anton / KC2RQR Node 29103

2 1

Control of URI GPIO pins
by KJ6KO 27 Dec '13

27 Dec '13

I know, I know, I'm sure it's in some manual somewhere, but I get frustrated when i can't find something within 15min. What are the commands to turn on and off the GPIO lines on the DMK URI? Better yet, "teach me how to fish" and point me to the location of a "detailed" explanation of the use of them? Momentary, latching, input functions etc. Thanks mucho! 73 de Greg KJ6KO __________ Information from ESET NOD32 Antivirus, version of virus signature database 9221 (20131227) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

2 1

VLAN Connections
by Bob - AF6D 27 Dec '13

27 Dec '13

We are working as fast as we can to deploy. But obstacles have been unavoidable. Nonetheless, our site vendor has offered us the ability to use his site-to-site microwave link and a VLAN. We intend on using the RTCM for voti9ng and simulcast. Our Motorola MSF 5000's have the GPS modules already. Does each RTCM require a unique IP or can it be referenced by a port number? Our control computer will be housed in my data center in Irvine and we need a gateway out of the VLAN to get to the control server. I am thinking in terms of IRLP and I understand there are mostly differences. But I want a private connection between our sites but I also want to create a conference channel so that others might benefit. How much bandwidth does each RTCM require? Thank you and Happy New Year! Bob

2 1

set authenticate j0hn1414
by John P Poiron 26 Dec '13

26 Dec '13

set authenticate j0hn1414 set delivery off

1 0

USB EMI?
by Doug Crompton 26 Dec '13

26 Dec '13

I had to restart asterisk after I got this message and my DMK went batty keying the transmitter at some crazy rate sounding like CW. Dec 23 22:07:13 WA3DSP_Allstar kernel: hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling... Curious about the EMI? because I was operating 75 meters phone 600 watts at the time this happened. The server and USB to DMK cable are in the basement well away from the antenna so I don't know if it is a coincidence or not. Anyone else ever seen this? Does the EMI in the message mean electromagnetic interference? 73 Doug WA3DSP http://www.crompton.com/hamradio

3 3

New Node Numbers (4XXXX)
by Jim Duuuude 25 Dec '13

25 Dec '13

We have nearly "run-out" of node numbers staring with the digit "2", and will soon be issuing node number starting with the digit "4". These will all be 5 digit numbers ("4", followed by 4 more digits). If anyone happens to be using this series in their "private number space" (contrary to system "standards"), please send me a private email, and we will attempt to accommodate you in the best way we can. Thanks, everyone, for making Allstar Link a great system, and showing incredible support and interest in such a way that system expansions of this nature are necessary. Have a great holiday season and a wonderful 2014!! Jim, WB6NIL

2 1

Re: [App_rpt-users] USB EMI?
by Geoff Edmonson 25 Dec '13

25 Dec '13

Same thing here... I don't have a basement so therefore, not the luxury of separation by distance. I can run 100w on 40m and not bother it. Turning the amp on kills it. Any power on 75m and the little URI throws its hands in the air in a suggested moment of surrender. I did find you only need to unplug and replug the USB line to reset it. Chuck Henderson <rpt2(a)chuck.midlandsnetworking.com> wrote: >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re: [App_rpt-users] custom connect messages
by Bradley Haney 25 Dec '13

25 Dec '13

I have uploaded my custom greeting to the sever and thinks appear to work I have the Cron job running correctly as i see an out put of what came in but in webmin setting it up i don' t know how to set it up to dump the info into the directory. Anyone have ideas? Bradley 28295/28079 All star node numbers

1 0

iaxRpt and wine
by Ed Wilhelm 24 Dec '13

24 Dec '13

I have been running iaxRpt under wine on my OpenSuse 12.2 laptop and it works great. Recently I decided it was time to get a bigger hdd and upgrade to OpenSuse 13,1. With this setup iaxRpt is very unstable and crashes often, the receive audio is OK, but transmit audio is some of the strangest sounding stuff I have ever heard. Don't think I have words to adequately describe it. The old setup is Wine 1.5.6 and the Linux kernel is 3.4.33. The new one is Wine 1.7.2 and the Linux kernel is 3.11. iaxRpt in both cases is 1.01.46, Just curious if anyone else has had this problem. Ed W8VT Nodes 27849, 29496

3 2

Re : Re: multicast with msr2000
by pete M 24 Dec '13

24 Dec '13

Was thinking it would be the cases. I want to have 2 xmiter on same freq on each side of the mont-royal in Montréal . As I dont have access to the top. --- Message initial --- De : "Ed Wilhelm" <vacuumtubesforever(a)gmail.com> Envoyé : 24 décembre 2013 07:12 A : app_rpt-users(a)ohnosec.org Objet : Re: [App_rpt-users] multicast with msr2000 The problem is the exciter. The MSR2000 is a crystal controlled radio. For simulcast you need to have a synthesized exciter that will except external reference from a GPS disciplined clock. That way all the transmitters in your system are exactly on the same frequency. If not, bad things will happen where your coverage overlaps. Ed W8VT Nodes 27849, 29496 On 12/23/2013 11:14 PM, pete M wrote: > Hi, > my vhf repeater is an msr2000. with a100 watt full duty PA. > > I could have a second msr2000 with exact same exciter/receiver board but different PA. > > First would a msr2000 be a good candidat for multicasting? > And does the fact that we would use a different PA at each site a problem? > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0