December 2013 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] iax2 registry issue
by mike＠midnighteng.com 31 Dec '13

31 Dec '13

1 0

Phones and Google Voice
by Robert Newberry 31 Dec '13

31 Dec '13

I need to be pointed in the right direction on where to read how to do this or a little help. Is it possible to use my already established Google Voice account for auto patch on the repeater? Also I'd like to be able to have a few voip phones on my server. So I can dial an extension to monitor the repeater or dial an extension to call someone on my network. Outbound calling to a POTS line isn't needed.

3 4

Latest SVN dies on Beagleboard
by Michael Wolthuis 31 Dec '13

31 Dec '13

Is anyone else having problems with the latest SVN dying on Beagle Board? I was in the CLI and it just boots me. After I fixed my NTP time, I downloaded latest SVN and now I can¹t stay connected anywhere. I have the same problem on another BeagleBoard that has the latest SVN. There is nothing in /var/log/asterisk/messages On some nodes, 27664 for example, it dies almost immediately after announcing connection. On some it stays for 3 minutes and then dies. Mike Kb8zgl The CLI just says, Disconnected from Asterisk server Executing last minute cleanupsLI ju

2 1

Need installation help
by Doug Crompton 31 Dec '13

31 Dec '13

I am trying to walk a neophyte through an acid install remotely. I am sure some of you know how trying that can be. So here is where we are - He has booted the iso disk and answered up to the static IP where he took the defualt for DHCP for now. The install went along and asked to remove the disk and then rebooted. When it rebooted it asks for the test login I had him type root PW setup. He gets the prompt. I took him through the command to look at /root/acid-install.log and from what he read me I don't see any problem. It among other normal things says it went to dl.allsstarlik.org and imported the centos 5 pgp keys. I am not getting the text exactly right here but you get the idea. It did not show any errors on doing any of this and the last line is phase1.sh done - rebooting. So now every time it boots it comes back to the test login screen. I suspect no network connectivity but nothing ever told us that specifically. The computer he is using work wirelessly with winxp but would not work through a wired connection. We were not sure if this was a hardware or windows SW problem. I was able to get him to ping another active IP on his local network and it came back unreachable. This is an old laptop computer and a very computer inexperienced person at the other end and I am trying to do this remotely over the radio. It would be a lot easier if I was there. Any ideas? 73 Doug WA3DSP http://www.crompton.com/hamradio

3 5

May have figured out stats problem
by Michael Wolthuis 31 Dec '13

31 Dec '13

NTP was failing to connect to a server and thus the Beagleboard thought it was 1970. Hopefully this will fix it, thanks, Mike - kb8zgl

1 0

In the CLI
by Michael Wolthuis 31 Dec '13

31 Dec '13

I am seeing the following in the CLI. [Feb 12 02:55:41] NOTICE[25454]: chan_iax2.c:9712 socket_process: Registration of 'A28881' rejected: 'Registration Refused' from: '67.215.233.178' [Feb 12 02:55:41] NOTICE[25456]: chan_iax2.c:9712 socket_process: Registration of 'A28241' rejected: 'Registration Refused' from: '67.215.233.178'

2 3

Status not updating in Portal
by Michael Wolthuis 31 Dec '13

31 Dec '13

My two nodes 28241 and 28881 on a Beagleboard are not updating their statuses on the portal. The maps look good on the nodes they are connected too. Anyone have any pointers, I haven¹t been able to figure it out? I have everything in the config file looking right, at least I think. Mike kb8zgl

1 0

Question regarding interfacing to a Kenwood Nextedge Repeater NXR-710/810
by Lu Vencl 30 Dec '13

30 Dec '13

I know this is a shot in the dark and I am probably the only one trying this, but is there by chance anyone that has successfully interfaced a URI to a Kenwood NEXEDGER Repeater NXR-710/810? My challenge is this. 1. Can't seem to find a way to feed in pre-emphasize TX audio.. Not a show stopper, but sure would be nice if I could. I can always run regular mode.. Tried the TX data input but got no audio 2. When using external PTT, it mutes the TX audio for some reason. Seems as when the repeater is receiving audio, and the URI bring PTT low on the External PTT, it mutes the audio completely. You hear no repeat audio. I am using in rpt.conf, Duplex =1.. If I do Duplex =0, then I get the internal repeat audio, but it does not take advantage of the Allstar processed audio such as audio delay and DTMF muting. There has to be a better way and has hoping someone has already succeeded in this challenge. I can email you the programming file to the repeater if you wish. Thanks in advance. Lu, KA4EPS

6 8

New node unable to connect to it.
by Steve Denbow 30 Dec '13

30 Dec '13

Hello All, Just put a new node (hub) online and I am unable to connect to it from my established node, but I can connect to it via the phone portal It show as registered on the portal, and this is the error I get... -- Hungup 'Zap/pseudo-160683732' [Dec 29 20:08:07] NOTICE[8435]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/75.74.231.119:4569-2295' -- Hungup 'Zap/pseudo-504507930' -- Remote UNIX connection -- Remote UNIX connection disconnected -- Remote UNIX connection -- Remote UNIX connection disconnected -- Remote UNIX connection -- Remote UNIX connection disconnected -- <Zap/pseudo-1833289829> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-1833289829> Playing 'digits/2' (language 'en') -- <Zap/pseudo-1833289829> Playing 'digits/7' (language 'en') -- <Zap/pseudo-1833289829> Playing 'digits/5' (language 'en') -- <Zap/pseudo-1833289829> Playing 'digits/4' (language 'en') -- <Zap/pseudo-1833289829> Playing 'digits/5' (language 'en') -- <Zap/pseudo-1833289829> Playing 'rpt/connection_failed' (language 'en') -- Hungup 'Zap/pseudo-1833289829' I can ping the IP address and the round trip average is 85ms with 0% of packets lost. Thanks! -- Steve Denbow | KD8BIW Ohio 220 Group (419)606-5774 Mobile kd8biw(a)gmail.com www.kd8biw.com

2 1

Re: [App_rpt-users] iax2 registry issue
by Geoff Edmonson 29 Dec '13

29 Dec '13

Instead of a reboot, restart the service. /etc/asterisk/init.d/ #> asterisk restart Or, use the built-in scripts... ~ # >astres.sh This is Linux, after all. A native Multi-user/muti-tasking operating system. Christopher Kovacs <w0anm73(a)gmail.com> wrote: >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0