December 2013 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] EchoLink issue
by wade 29 Dec '13

29 Dec '13

The ports are forwarding to the correct IP address. There is only one connection per location for echolink. All was working properly the first day, then the second day came and no inbound connections are possible. We can also no longer get in from our Android phones. Thi is the message my friend gets. ERROR [2306] chan_echolink.c: connect{} failed to connect to the echolink server server2.echolink.org Hope this can help diagnose what going on here.. Wade KC0MLT On 12/22/2013 2:46 PM, mike(a)midnighteng.com wrote: > > one thing to check... > incoming and outgoing routes in your router udp ports for echolink and > allstar > > then know that > > echolink only allows one connection per ip address. > > Hope that leads you somewhere if you have not found it. > > ...mike/kb8jnm > > > -------- Original Message -------- > Subject: [App_rpt-users] EchoLink issue > From: wade <wadeo(a)charter.net <mailto:wadeo@charter.net>> > Date: Sun, December 22, 2013 3:39 pm > To: App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> > > Hello all, > > I recently helped a friend here in town to setup his first AllStar > node. > After getting everything up and running including the echolink > part the > next day it stopped allowing incoming connections. After doing some > investigation mine has also stopped allowing incoming connections. > Both > of ours can connect out from our nodes but no one can connect in. > On my > node it comeback with a simple time out message, on his node it comes > back with unauthorized. Has anyone had this issue before and if so > what > was the fix? > > Our routers have all the appropriate port forwarding settings in them > and have since the echolink on windows days. This is just a very > strange > occurrence to me that both of us have this problem and get two > different > messages back to other users. Any help would be greatly appreciated! > > Thanks > Wade > KC0MLT > > AllStar node 28757 > Echolink node number 223846 > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

5 6

Re: [App_rpt-users] Latitude / Longitude
by tom 28 Dec '13

28 Dec '13

I would be happy to be able to enter lat/Long numerically (if the web map is a problem). TRA

2 1

lat-lon map error
by Steve Denbow 28 Dec '13

28 Dec '13

When loading the map from Google Chrome I get an "insecure content" error. I can override the error by clicking on the "Shield" icon at the right of the url box. The actual error relates to Java and this is what it is reporting... [blocked] The page at https://allstarlink.org/portal/select_location.php?Config_ID=14C0G6E5WSV3EF… insecure content from http://maps.google.com/maps?file=api&v=2&key=ABQIAAAAcgRRwn-Z4eZbrK8vV_Ax4B…. Uncaught ReferenceError: GMap is not defined select_location.php:42<https://allstarlink.org/portal/select_location.php?Config_ID=14C0G6E5WSV3EF…> Once I get the map to display and zoom to the correct location and click the map, this is what Java is reporting... The page at https://allstarlink.org/portal/select_location.php?Config_ID=14C0G6E5WSV3EF… insecure content from http://maps.gstatic.com/mapfiles/openhand_8_8.cur. Perhaps the webmaster could use the information to correct the error. It appears to be related to SSL and API issues. Hopefully it is corrected soon. Thanks and good luck! -- Steve Denbow | KD8BIW Ohio 220 Group (419)606-5774 Mobile kd8biw(a)gmail.com www.kd8biw.com

1 0

Re: [App_rpt-users] Latitude/longitude
by zeppelin.1＠netzero.com 28 Dec '13

28 Dec '13

Pointless; the TAB key should work by default, in this case, it skips the Latitude /Longitude boxes :( Anton/ kc2rqr Node 29103 ---------- Original Message ---------- From: app_rpt-users-request(a)ohnosec.org To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 58, Issue 84 Date: Sat, 28 Dec 2013 09:48:12 -0500 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. lat-lon map (41.2 Jim) 2. Re: lat-lon map (Chuck Henderson) 3. Re: Latitude / Longitude (tom) 4. Re: Latitude/longitude (zeppelin.1(a)netzero.com) ---------------------------------------------------------------------- Message: 1 Date: Fri, 27 Dec 2013 23:47:33 -0700 From: "41.2 Jim" <41.2jim(a)gmail.com> To: Allstar app_rpt-users Group <App_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] lat-lon map Message-ID: <CACXxdpFuRCESMoHj4aL2miuXV=m4pNBoQ2YSSzDd9_LWEAaT4A(a)mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" I found that if you select display all content not just secure content the window with the map comes right up in Internet Explorer Jim Frederick KF6QBW 446.600- 100.0 PL Repeater AllStar Node # 28839 Skype = jim41.2

1 0

lat-lon map
by 41.2 Jim 28 Dec '13

28 Dec '13

I found that if you select display all content not just secure content the window with the map comes right up in Internet Explorer Jim Frederick KF6QBW 446.600- 100.0 PL Repeater AllStar Node # 28839 Skype = jim41.2

3 2

Re: [App_rpt-users] Latitude/longitude
by zeppelin.1＠netzero.com 28 Dec '13

28 Dec '13

Thanks for the replies, FYI, the node was initially set up with the wrong U.S. coordinates and wanted to correct the region, ended up in Europe, France instead Anton/ kc2rqr Node 29103 ---------- Original Message ---------- From: app_rpt-users-request(a)ohnosec.org To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 58, Issue 82 Date: Fri, 27 Dec 2013 22:33:48 -0500 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: Latitude/longitude (mike(a)midnighteng.com) 2. Re: rpt.conf clarification (Bob) 3. Re: Latitude/longitude (mike(a)midnighteng.com) 4. Re: Latitude/longitude (Doug Crompton) 5. Re: rpt.conf clarification (Doug Crompton) ---------------------------------------------------------------------- Message: 1 Date: Fri, 27 Dec 2013 17:19:33 -0700 From: <mike(a)midnighteng.com> To: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Latitude/longitude Message-ID: <20131227171933.71befee5dbd13c5325dd1a521b4e73ee.29edd22779.wbe(a)email06.secureserver.net> Content-Type: text/plain; charset="us-ascii" An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20131227/6c524712/at…> ------------------------------ Message: 2 Date: Fri, 27 Dec 2013 16:49:01 -0800 From: "Bob" <kk6ecm(a)gmail.com> To: <app_rpt-users(a)ohnosec.org> Subject: Re: [App_rpt-users] rpt.conf clarification Message-ID: <7C671A82F7BC4AEABDC103BE47028754@ThePykesHP> Content-Type: text/plain; charset="us-ascii" Thanks all... was hoping to be able to reduce the volume of the "idtalkover" without impacting the regular ID (i.e. idrecording=|ixxxxx). Guess I'll just reduce the one. Thanks, Bob KK6ECM -----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Friday, December 27, 2013 2:47 PM To: Bob Cc: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] rpt.conf clarification Hey Bob, 1) It just denotes "repeater" and is optional. My talk over ID is really old school, and a holdover from when I lived in Austin. Only place I'd ever seen this, but the repeaters usually ID'ed with calsign/R AUS (airport code for Austin). So mine ID's as KB5ELV/R ERI as a nod to my misspent youth. You can drop the volume of the morse ID in the morse stanza. There's a line that goes idamplitude=2048 (or some number) I've set mine to idamplitude=1024 and idfrequency=650. Not too loud, but loud enough to be heard, and pleasant to my ear. -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY On Dec 27, 2013, at 5:18 PM, Bob <kk6ecm(a)gmail.com> wrote: > > 1) What is the purpose or function of the "/r" after the call sign in the > idtalkover example below? > > http://ohnosec.org/drupal/node/129 > > "idtalkover=|iwa6zft/r ; Morse Code ID" > > 2) Is there a way of reducing the idtalkover volume (morse code ID or sound > file)? If so, how? > > Thanks, > Bob > KK6ECM > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ------------------------------ Message: 3 Date: Fri, 27 Dec 2013 18:26:21 -0700 From: <mike(a)midnighteng.com> To: App_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Latitude/longitude Message-ID: <20131227182621.71befee5dbd13c5325dd1a521b4e73ee.f0e7164be4.wbe(a)email06.secureserver.net> Content-Type: text/plain; charset="us-ascii" An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20131227/0eaa13f4/at…> ------------------------------ Message: 4 Date: Fri, 27 Dec 2013 22:28:41 -0500 From: Doug Crompton <doug(a)crompton.com> To: "mike(a)midnighteng.com" <mike(a)midnighteng.com> Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: Re: [App_rpt-users] Latitude/longitude Message-ID: <BLU172-W130490FAF4AA6B41B5F69EBACC0(a)phx.gbl> Content-Type: text/plain; charset="iso-8859-1" This is a common problem that I and others have discussed in the last month. Someone was going to look into it but I not heard anything more. No, you can't enter them manually and yes, you don't need to enter them to establish a server. The problem is the map does not work on many browser configurations. I have tried Chrome, Explorer, and Firefox with no luck but a few others have had some success. In general it is a problem. I think probably the intent was to make you use the map to avoid errors. Since the map does not work well some can't enter the values. 73 Doug WA3DSP http://www.crompton.com/hamradio From: mike(a)midnighteng.com To: App_rpt-users(a)ohnosec.org Date: Fri, 27 Dec 2013 18:26:21 -0700 Subject: Re: [App_rpt-users] Latitude/longitude You know, you're right, you can't enter them as I remember (I think I tried that also). At this point, you do not have to enter them to get your set-up.Just go past that part of set-up and when things are working again, you can go back and enter them. It will not prevent you from continuing. At least it let me set-up my second server and get some new nodes without it. Perhaps someone knows what's-up with the website/portal and can shed some light on when. ...mike/kb8jnm -------- Original Message -------- Subject: Re: [App_rpt-users] Latitude/longitude From: Sam Nabkey <sam.nabkey(a)gmail.com> Date: Fri, December 27, 2013 7:29 pm To: mike(a)midnighteng.com Doesn't help to get the coordinates manually because I can't find a way to enter them. Can you shed some light on how that might be done? On Dec 27, 2013 7:19 PM, <mike(a)midnighteng.com> wrote: Anton, I think I know what you're speaking off (forgive me if not), I was at the website earlier this week and tried to set-up a new server and that interface was not working (using xp machine). My guess was that, as happens from time to time, google changed the way their interface works and the website needs updated. I could be wrong. But I would not do anything rash as I don't think it's a problem on your end. There is a way to go to google manually and get your lat/log coordinates from a map. Perhaps this might help...https://support.google.com/maps/answer/18539?hl=en ...mike/kb8jnm -------- Original Message -------- Subject: [App_rpt-users] Latitude/longitude From: "zeppelin.1(a)netzero.com" <zeppelin.1(a)netzero.com> Date: Fri, December 27, 2013 6:29 pm To: app_rpt-users(a)ohnosec.org Hello to all, attempting to set up the node lat and long on the All Star link portal using ie7, ie8 and Safary with no success. Any suggestions? Thanks Anton / KC2RQR Node 29103 ____________________________________________________________ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re: [App_rpt-users] Latitude/longitude
by N7LD＠aol.com 28 Dec '13

28 Dec '13

With IE try clicking the compatibility icon, the little broken page symbol. Lee In a message dated 12/27/2013 9:13:35 P.M. Pacific Standard Time, rpt2(a)chuck.midlandsnetworking.com writes: It would be really nice if someone with access would just change it so that we could manually enter the coordinates in the boxes, at least until the map code is fixed. Who has the access to change the web page? I have tried this using every current browser that I could find to download and I have tried it on win-xp, win-vista, win-7, win-8, linux, sun, HPUX. they each fail. none of them work. On Fri, Dec 27, 2013 at 9:28 PM, Doug Crompton <_doug(a)crompton.com_ (mailto:doug@crompton.com) > wrote: This is a common problem that I and others have discussed in the last month. Someone was going to look into it but I not heard anything more. No, you can't enter them manually and yes, you don't need to enter them to establish a server. The problem is the map does not work on many browser configurations. I have tried Chrome, Explorer, and Firefox with no luck but a few others have had some success. In general it is a problem. I think probably the intent was to make you use the map to avoid errors. Since the map does not work well some can't enter the values. 73 Doug WA3DSP http://www.crompton.com/hamradio ____________________________________ From: _mike(a)midnighteng.com_ (mailto:mike@midnighteng.com) To: _App_rpt-users(a)ohnosec.org_ (mailto:App_rpt-users@ohnosec.org) Date: Fri, 27 Dec 2013 18:26:21 -0700 Subject: Re: [App_rpt-users] Latitude/longitude You know, you're right, you can't enter them as I remember (I think I tried that also). At this point, you do not have to enter them to get your set-up. Just go past that part of set-up and when things are working again, you can go back and enter them. It will not prevent you from continuing. At least it let me set-up my second server and get some new nodes without it. Perhaps someone knows what's-up with the website/portal and can shed some light on when. ...mike/kb8jnm -------- Original Message -------- Subject: Re: [App_rpt-users] Latitude/longitude From: Sam Nabkey <_sam.nabkey(a)gmail.com_ (mailto:sam.nabkey@gmail.com) > Date: Fri, December 27, 2013 7:29 pm To: _mike(a)midnighteng.com_ (mailto:mike@midnighteng.com) Doesn't help to get the coordinates manually because I can't find a way to enter them. Can you shed some light on how that might be done? On Dec 27, 2013 7:19 PM, <_mike(a)midnighteng.com_ (mailto:mike@midnighteng.com) > wrote: Anton, I think I know what you're speaking off (forgive me if not), I was at the website earlier this week and tried to set-up a new server and that interface was not working (using xp machine). My guess was that, as happens from time to time, google changed the way their interface works and the website needs updated. I could be wrong. But I would not do anything rash as I don't think it's a problem on your end. There is a way to go to google manually and get your lat/log coordinates from a map. Perhaps this might help... https://support.google.com/maps/answer/18539?hl=en ...mike/kb8jnm -------- Original Message -------- Subject: [App_rpt-users] Latitude/longitude From: "_zeppelin.1(a)netzero.com_ (mailto:zeppelin.1@netzero.com) " <_zeppelin.1(a)netzero.com_ (mailto:zeppelin.1@netzero.com) > Date: Fri, December 27, 2013 6:29 pm To: _app_rpt-users(a)ohnosec.org_ (mailto:app_rpt-users@ohnosec.org) Hello to all, attempting to set up the node lat and long on the All Star link portal using ie7, ie8 and Safary with no success. Any suggestions? Thanks Anton / KC2RQR Node 29103 ____________________________________________________________ ____________________________________ _______________________________________________ App_rpt-users mailing list _App_rpt-users(a)ohnosec.org_ (mailto:App_rpt-users@ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list _App_rpt-users(a)ohnosec.org_ (mailto:App_rpt-users@ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list _App_rpt-users(a)ohnosec.org_ (mailto:App_rpt-users@ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list _App_rpt-users(a)ohnosec.org_ (mailto:App_rpt-users@ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re: [App_rpt-users] Latitude/longitude
by mike＠midnighteng.com 28 Dec '13

28 Dec '13

3 2

DMK URI and Baofeng Radios
by Adam Booth 28 Dec '13

28 Dec '13

Hello, I am looking to set up my first Allstar node and I'm going to use either a Baofeng UV-5R or UV-82 HT for the radio. I plan to interface this to the node with a DMK Engineering URI (http://dmkeng.com/URI_Order_Page.htm) I have yet to order. Does anyone here have experience with interfacing Baofeng HTs to the DMK URI and have any tips on how to secure the connection and anything else I should know? I am also interested in Echolink so a product that would be compatible with Echolink would be my best choice. Any other suggestions for radio interfaces would be welcome as well. I have looked into Advanced Repeater Systems' products as well (http://arsrepeaters.com/USB_AllStar_Adapters.php) and they look excellent, however, I would prefer the versatility of something like the URI for when I upgrade the radio on the node. It looks like the ARS product only interfaces to a certain radio but the URI will interface to anything (give you know the pinouts on your radio, etc). So all in all, I am getting started and have yet to choose an interface. I have the Baofeng radio chosen as my starter radio, everything else is open to suggestions! Thanks Adam KL3TX

10 17

Re: [App_rpt-users] Latitude/longitude
by mike＠midnighteng.com 28 Dec '13

28 Dec '13

1 0