June 2013 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] virtualisation
by Anthony Percy 26 Jun '13

26 Jun '13

Hi Jonathon, Real time USB comms can be an issue for VMs under certain conditions. Allstar will work but sometimes the audio can be chopped or stutters. It's not a fault of Allstar but the USB under the vm. I have run Allstar under virtual box for dev purposes and the more load the vm hardware is under, the worst the audio breakup... Hope fully the vm vendors with give the USB a real time option in future releases... Regards Anthony, VK2ACP From: Jonathan Weirmeir Hi, group! I'm new to app_rpt RoIP, coming from a background with IRLP. I'm wondering if anyone has ever tried virtualizing AllStar, and if so, were there any issues. Thanks! Jonathan

1 0

ID being broadcast over link
by James Hill 25 Jun '13

25 Jun '13

Hi guys (again - sorry) I've just been informed that my node is broadcasting its CW id over the link, and it has raised a few eyebrows! I'm awaiting confirmation that it has been happening since I went over to COR from VOX earlier today (where I had the looping problems). In the meantime, is there anywhere I ought to be looking in configs to try and track down a potential issue? Thanks, James

1 0

COR
by James Hill 25 Jun '13

25 Jun '13

Thanks for the advice guys - I've built the circuit up, and it does switch the node RX on and off as it should, but it's "crashing" the RX on the radio and not passing audio when it's connected. That's a bit out of the scope for this group, so off to the Motorola forum I go! Thanks! James

1 0

COR
by James Hill 25 Jun '13

25 Jun '13

Guys, I'm trying to get COR sorted via the Parallell port. I've figured out I need to ground pin 15 in order to turn RX on and off. The problem is, I have a +5V signal from my radio when there is a carrier present. Can anybody point me toward an easy circuit to be able to convert the +5V to a negative in order to turn the RX on and off? If I set ppinvert, it turns the RX on when I ground the pin - so that seems to be the way to go. I've tried googling, but all sorts of stuff comes up! Thanks, James

2 1

Re: [App_rpt-users] Courtesy Tones.....
by James Hill 25 Jun '13

25 Jun '13

Right, I have broken out a COR line from my radio (+5v when a carrier is detected). What do I do with it now? I've tried going via a resistor and diode into the PP, pin 15 but the node is permanently locked into RX regardless of any connection. My usbradio.conf is pasted below: [usb29681] hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 ;#txctcssdefault=100.0 ;#rxctcssfreqs=100.0 ;#txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=pp pp15=cor ctcssfrom=no rxdemod=speaker txprelim=no txlimonly=no txtoctype=notone txmixa=voice txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0 PP in BIOS is set to Bi Directional (assuming it makes a difference?). If I have to, I'll go on to pin 47 (I think) of the CM108 chip, but I'd rather try the PP method first! Cheers, J

1 0

Re: [App_rpt-users] Courtesy Tones.....
by James Hill 25 Jun '13

25 Jun '13

Hi Mike, I have a Simplex node, Hardware is Dell Latitude D600, connected to WLAN at 150mpbs. External ADSL is good, 15580mbps download speed. Running Top indicates: top - 17:55:39 up 5 min, 2 users, load average: 0.14, 0.22, 0.12 Tasks: 71 total, 2 running, 69 sleeping, 0 stopped, 0 zombie Cpu(s): 2.3%us, 0.3%sy, 0.0%ni, 97.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 514596k total, 216224k used, 298372k free, 15360k buffers Swap: 1020116k total, 0k used, 1020116k free, 139908k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2466 root 15 0 39152 18m 5584 S 2.7 3.6 0:10.81 asterisk 2809 root 15 0 2312 1008 812 R 0.3 0.2 0:00.01 top Interface is modified CM108 USB device. The problem I have, is when unconnected to any node. When connected, all is good - When station TXing on the link drops their TX, courtesy pip. All good. The Issue is obviously something local, as whenever a signal is RXed locally, the box responds with a courtesy pip and a CWID and then drops carrier. But then proceeds to key up numerous times (anywhere between 6 & 14 at the last count), each key up giving a pip and then dropping carrier. If I go into rpt.conf and set unlinkedct=0, it will still key up multiple times - but no tone. If I set duplex=0, the problem goes away (but I get no courtesy tones - but I still get "function complete" etc ok). Something is looping somewhere.... it's just a case of trying to find it! rpt.conf is pasted below! Cheers, James [29681] ; Change this to your assigned node number rxchannel=Radio/usb29681 duplex=1 erxgain=-6 etxgain=-6 ;controlstates=controlstates scheduler=schedule29681 morse=morse29681 macro=macro29681 functions=functions29681 phone_functions=functions29681 link_functions=functions29681 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iG0FHM F accountcode=RADIO hangtime=50 althangtime=100 totime=170000 idtime=300000 ;politeid=3000 linktolink=1 idtalkover=|iG0FHM F unlinkedct=ct1 remotect=ct1 remotetx=ct1 linkunkeyct=ct1 nolocallinkct=1 ;eannmode=1 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 holdofftelem=0 ;beaconing=1 ; ; *** Status Reporting *** ; ; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org ; depending on whether you are running ACID or Limey Linux. ; ** For ACID *** statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ** For Limey Linux ** ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; ; Morse code parameters, these are common to all repeaters. ; [morse29681] speed=30 frequency=800 amplitude=4096 idfrequency=800 idamplitude=1024 [schedule29681] ;dtmf_function = m h dom mon dow ; ala cron, star is implied 80=00 * * * * 80=15 * * * * 80=30 * * * * 80=45 * * * * 81=00 * * * * [functions29681] 1=ilink,1 2=ilink,2 3=ilink,3 4=ilink,4 5=macro,1 70=ilink,5 71=ilink,6 72=ilink,7 73=ilink,15 74=ilink,16 75=ilink,8 80=status,1 81=status,2 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn ; Autopatch down 99=cop,43 980=status,3 ;99=cop,6 ; Place command macros here [macro29681] 80=*80 81=*81 [telemetry] ;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ct1=|t(2175,0,50,8192) ;ct2=|t(660,880,150,2048) ct2=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000) ct3=|t(2175,0,150,4096) ct4=|t(550,0,150,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ct8=|t(700,1100,150,2048) ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000) remotetx=|t(2175,0,150,8192) remotemon=|t(1209,0,50,2048) cmdmode=|t(900,903,200,2048) ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) functcomplete=|t(350,0,100,8192)(500,0,100,8192)(660,0,100,8192) ;functcomplete=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ;functcomplete=|(2175,0,300,8192) patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times] telemwait=2750 idwait=2750 unkeywait=500 calltermwait=2000 ; ; This is where you define your nodes which cam be connected to. [nodes] ; Note, if you are using automatic update for allstar link nodes, ; no allstar link nodes should be defined here. Only place a definition ; for your locak nodes, and private (off of allstar link) nodes here. ;29681 = radio(a)127.0.0.1/29681,NONE ; Memories for remote bases [memory] ;00 = 146.580,100.0,m ;01 = 147.030,103.5,m+t ;02 = 147.240,103.5,m+t ;03 = 147.765,79.7,m-t ;04 = 146.460,100.0,m ;05 = 146.550,100.0,m #includeifexists custom/rpt.conf

3 7

Duplex
by Bill Hurlock 25 Jun '13

25 Jun '13

How do I get the node configured so that it is in full duplex to the repeater radio. When someone comes into my node via RF I want there audio repeated locally. All that happens now is you here the courtesy tone when they unkey but while they're talking there is no repeated audio from them out bound from the repeater. Bill Hurlock CPCommunications 856-234-1661 Office 856-264-1010<http://www.totalrf.com/> Cell www.cpcomms.com<http://www.cpcomms.com/> WA2TQI

2 1

Re: [App_rpt-users] acid install failed
by Vince P 25 Jun '13

25 Jun '13

Thank You Johnny. The problem is i can't login to the box to do anything because i can't find out the ip address all it shows it this error. am not sure why. i have the install a few times but as the end of the full installation this is what shows. i though the box was bad but i have installed windows and ubuntu os on the box and it all walks great. so am just puzzled as to whats going on. Vince VE3ELB On 2013-06-24, at 9:31 PM, Johnny Keeker <cypresstower(a)yahoo.com> wrote: VInce: When that happens to me it's allways an error in one of the configuration files. iax.conf, usbradio.conf. rpt.conf.extensions.conf. Located in the /etc/asterisk folder. --- On Sun, 6/23/13, Vince VE3ELB <ve3elb(a)yahoo.com> wrote: From: Vince VE3ELB <ve3elb(a)yahoo.com> Subject: [App_rpt-users] acid install failed To: "APP RPT Forums" <app_rpt-users(a)ohnosec.org> Date: Sunday, June 23, 2013, 6:43 PM Hello All. I am having problem can anyone let me know why i am getting this error. I am installing Acid Centos on new box and i have done the install twice but at the end of each full installation after it restarts i get this message listed below. what is the problem and how can i fix this. thank you asterisk ended with exit status 1 asterisk died with code 1 mpg123: no process killed Vince -----Inline Attachment Follows----- _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re: [App_rpt-users] acid install failed
by Dwaine Garden VE3GIF 25 Jun '13

25 Jun '13

I've had the same problem. Something is wrong with one of the configuration files. Wrong parameter in the configs. Vince VE3ELB <ve3elb(a)yahoo.com> wrote: >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

acid install failed
by Vince VE3ELB 24 Jun '13

24 Jun '13

Hello All. I am having problem can anyone let me know why i am getting this error. I am installing Acid Centos on new box and i have done the install twice but at the end of each full installation after it restarts i get this message listed below. what is the problem and how can i fix this. thank you asterisk ended with exit status 1 asterisk died with code 1 mpg123: no process killed Vince

1 1