January 2015 - App_rpt-users - lists.keekles.org

App_rpt support to AMI Events (https://github.com/ismaelisuani/rpt_events)
by Ismael Isuani 09 Jan '15

09 Jan '15

Hi Jim, I've added support to receive events via AMI when app_rpt updates RPT_* variables and when MDC-1200 and DTMF are detected, without the need for pooling sending commands via AMI. You can see the changes here: https://github.com/ismaelisuani/rpt_events/commit/dcc61ebef5ecc405a5e3839be… Is it possible to include this feature to current project? Regards. Ismael Isuani

3 3

Re: [App_rpt-users] Disabling Autopatch From the Phone Portal/Web Transceiver?
by mike＠midnighteng.com 09 Jan '15

09 Jan '15

It does become hard to separate because a user is a user in app_rpt. It is generic. And with asterisk, there is normally more than one way to do anything but, I can only suggest tagging the incoming portal connection with a specific callerid or var and blocking it at the phone patch. Much like a network tagging. You might need to look-up asterisk techniques to accomplish that. While I am pretty sure you can do this without affecting other app_rpt options/funtions, it may not be your best option. Perhaps someone else has a better plan of attack. ...mike/kb8jnm > -------- Original Message -------- > Subject: [App_rpt-users] Disabling Autopatch From the Phone Portal/Web > Transceiver? > From: Buddy Brannan <buddy(a)brannan.name> > Date: Fri, January 09, 2015 9:27 am > To: app_rpt-users(a)ohnosec.org > > > Hi, > > Does anyone know how I can set up to allow the auto patch to only be accessed over RF, i.e. so that someone cannot place an auto patch call from the phone portal or web transceiver? I’m sure this is somehow accomplished with context, but I’m not quite sure how to do it. > > Thanks, > > — > Buddy Brannan, KB5ELV - Erie, PA > Phone: 814-860-3194 > Mobile: 814-431-0962 > Email: buddy(a)brannan.name > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] Autopatch type question
by mike＠midnighteng.com 09 Jan '15

09 Jan '15

Mike, All you need to do is make a phone patch to the "registered" ip phone. I know saying it that simple is not always that simple if you have never scrubbed through the phone patch section of extensions.conf (uses stanza of radio) You might want to create a new autopatch command as so to set new timeout values and mask dial tone and the like for those calls. Here is a example in phone patch of extensions.conf. [radio] exten => _5XXX,1,Dial(sip/${EXTEN},17) ;dials ext 5xxx on this box When you dial any 4 digit exten starting with 5, it will dial the call. You could list each ext but this is cleaner using wildcards. Keep your ext's grouped together by type so you can have some rules or group rules. You perhaps need routing for multiple boxes. There is much to know of rules of asterisk dialing. Start here and see where you get. Let me know and I'll guide you through as I can... ...mike/kb8jnm > -------- Original Message -------- > Subject: [App_rpt-users] Autopatch type question > From: Mike Lussier <mike.lussier(a)gmail.com> > Date: Fri, January 09, 2015 9:12 am > To: ALL STAR <app_rpt-users(a)ohnosec.org> > > > I have successfully setup my nodes on the bbhn mesh network. I setup IAX2 > trunks from my RasPBX to each node. I can connect to the nodes from an IP > phone and carry on a conversation using the keypad to activate the PTT and > release it. > What I haven't figured out is how to setup the system to allow a mobile or > HT to connect to an IP phone. I'm not after dial tone and placement of > calls but a way for folks to dial an IP phone in our ARES EOC room or > another ham home if they aren't on the radio. > > Any thoughts ? > > Mike > > > -- > > *"We must reject the idea that every time a law is broken, society is > guilty rather than the law breaker.It is time to restore the American > precept that each individual is accountable for his actions." ~ Ronald > Regan*<hr>_______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Disabling Autopatch From the Phone Portal/Web Transceiver?
by Buddy Brannan 09 Jan '15

09 Jan '15

Hi, Does anyone know how I can set up to allow the auto patch to only be accessed over RF, i.e. so that someone cannot place an auto patch call from the phone portal or web transceiver? I’m sure this is somehow accomplished with context, but I’m not quite sure how to do it. Thanks, — Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy(a)brannan.name

1 0

Autopatch type question
by Mike Lussier 09 Jan '15

09 Jan '15

I have successfully setup my nodes on the bbhn mesh network. I setup IAX2 trunks from my RasPBX to each node. I can connect to the nodes from an IP phone and carry on a conversation using the keypad to activate the PTT and release it. What I haven't figured out is how to setup the system to allow a mobile or HT to connect to an IP phone. I'm not after dial tone and placement of calls but a way for folks to dial an IP phone in our ARES EOC room or another ham home if they aren't on the radio. Any thoughts ? Mike -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

1 0

proper remote base frequency functioning?
by Sam Skolfield 08 Jan '15

08 Jan '15

Hello group, Assuming that I have a working remote base node, what is the command convention for controlling radio settings like frequency, PL, shift, etc? Still being new the fundamentals of app_rpt, I am trying to control the radio with "rpt fun" through the SSH. Example: rpt fun *node 152525* (trying to tune my xcat to 52.525 via remote base function 1) I'm using Tim's example rpt.conf: rxchannel = Simpleusb/usb ; Rx audio/signalling channel remote = xcat civaddr = 32 functions = functions-remote lconn = PP3=1 ldisc = PP3=0 memory = memory ; Section to hold memory entries (optional) ; remote=ft897 for Yaesu FT-897 or ; remote=rbi for Doug Hall RBI1 ; remote=kenwood for Kenwood mobiles such as the TMG707A ; remote=ic706 for the Icom IC-706 ioport = /dev/ttyUSB0 ; Specify port for serial port (QFS specified his USB) iospeed = 19200 dusbabek = yes ;iobase = 0x378 ; Specify IO port for parallel port (optional) authlevel = 2 ; Remote base authentication level ;; authlevel = 0 : Anyone can use it ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it ;; authlevel = 2 : Requires log in, asks for it automously ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) _________________________________________________________ Any help in general from app_rpt/xcat gurus would be really appreciated! Thanks for reading, and 73 -- KJ6QFS Sam Skolfield

2 1

RPM command doesn't work on BBB
by VE2JVE 06 Jan '15

06 Jan '15

Hi I want to install Webmin on the BeagleBone. I downloaded the RPM file. I found the RPM command (in another folder in the BBB) and copied it in the /bin directory. But when i'm trying to install Webmin with the RPM command, nothing happens and I've gotten no error messages. Is someone can help me? Jean

5 5

Question Regarding Node Linking
by David Dean K0PWO 06 Jan '15

06 Jan '15

Hello to the group, I have searched and searched regarding this questions because I know I have seen the question by others. But I cannot find the previous emails etc. So I need to ask again. I am wanting my node and repeater to automatically connect to my hub upon staring or restarting of asterisk. Can someone provide me the lines of code that I should enter to make this happen. Thank you once again for your time in assisting me. David David Dean, K0PWO Arapahoe County Colorado (720) 350-2053 cell (720) 207-9030 fax

2 1

Re: [App_rpt-users] Question Regarding Node Linking
by mike＠midnighteng.com 06 Jan '15

06 Jan '15

There can be many methods but I guessing the best in your case is to create a start-up macro in rpt.conf startup_macro=*345001,*9410 (startup_macro=*3node# comma next startup command & no need to terminate the line) ...mike/kb8jnm > -------- Original Message -------- > Subject: [App_rpt-users] Question Regarding Node Linking > From: "David Dean K0PWO" <david(a)k0pwo.com> > Date: Tue, January 06, 2015 12:31 pm > To: "'app_rpt mailing list'" <app_rpt-users(a)ohnosec.org> > > > Hello to the group, > > > > I have searched and searched regarding this questions because I know I have > seen the question by others. But I cannot find the previous emails etc. > > > > So I need to ask again. > > > > I am wanting my node and repeater to automatically connect to my hub upon > staring or restarting of asterisk. Can someone provide me the lines of code > that I should enter to make this happen. > > > > Thank you once again for your time in assisting me. > > > > David > > > > > > > > David Dean, K0PWO > > > > Arapahoe County Colorado > > (720) 350-2053 cell > > (720) 207-9030 fax<hr>_______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

inteo
by jimmy keffer 05 Jan '15

05 Jan '15

hi group, i'm a disable ham from dawson pa. i'm 38 years old in wheelchair. i have been a ham since i was 13. i'm quite a computer person. i spend 12 to 14 hours a day online soon i will have an allstar node on a friends box. i look forward to learning the allstar systems and network. i'm not a programmer but enjoy learning about computer code and the way things are setup, so i hope u guys will let me join the tech group about allstar and allow me learn about it. 73 jimmy ka3vgm

2 1