June 2016 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] asterisk crashing in DIAL
by Steve Zingman 15 Jun '16

15 Jun '16

It's good to hear that the script works as intended, with Debian. On 06/15/2016 05:59 PM, Loren Tedford wrote: > ok in debian it works at this moment must be some very slight > differneces causing it not to download the files into the asterisk > folder.. > > > almost wish their was a seperate command just to download only those > config files only.. > > > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> > http://www.lorentedford.com <http://www.lorentedford.com/> > http://www.kc9zhv.com > http://forum.kc9zhv.com > http://hub.kc9zhv.com > http://www.newwavesucks.com > http://forum.newwavesucks.com > > On Wed, Jun 15, 2016 at 4:42 PM, Loren Tedford <lorentedford(a)gmail.com > <mailto:lorentedford@gmail.com>> wrote: > > ok.. I will install debian in a vm and see here in a moment.. > > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> > http://www.lorentedford.com <http://www.lorentedford.com/> > http://www.kc9zhv.com > http://forum.kc9zhv.com > http://hub.kc9zhv.com > http://www.newwavesucks.com > http://forum.newwavesucks.com > > On Wed, Jun 15, 2016 at 4:41 PM, Steve Zingman > <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: > > So, > I'm guessing you are having a problem with Ubuntu. That > explains the question on the AllStar list " Just wanting to > know when we will have the nodesetup script working again.." > I think the script runs on Debian. If you are trying to use it > on Ubuntu "your mileage may vary" > > > > On 06/15/2016 05:33 PM, Loren Tedford wrote: >> this is the one i have been trying to use but it has caused >> me lots of issues when i pull from allstarlink servers.. >> >> https://github.com/N4IRS/AllStar/blob/master/platforms/x86/jessie/x86_allst… >> >> Loren Tedford (KC9ZHV) >> Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> >> http://www.lorentedford.com >> http://www.kc9zhv.com >> http://forum.kc9zhv.com >> http://hub.kc9zhv.com >> http://www.newwavesucks.com >> http://forum.newwavesucks.com >> >> On Wed, Jun 15, 2016 at 4:30 PM, Steve Zingman >> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >> >> https://github.com/N4IRS/AllStar/ >> >> On Jun 15, 2016 5:27 PM, Loren Tedford >> <lorentedford(a)gmail.com <mailto:lorentedford@gmail.com>> >> wrote: >> >> Hey Steve could you send me a installation script for >> x86 systems I need to reinstall on my ubuntu machine >> and having issues.. >> >> >> Loren Tedford (KC9ZHV) >> Email: lorentedford(a)gmail.com >> <mailto:lorentedford@gmail.com> >> http://www.lorentedford.com >> http://www.kc9zhv.com >> http://forum.kc9zhv.com >> http://hub.kc9zhv.com >> http://www.newwavesucks.com >> http://forum.newwavesucks.com >> >> On Wed, Jun 15, 2016 at 3:52 PM, Steve Zingman >> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> >> wrote: >> >> I will be moving both asterisk and updatenodelist >> to systemd. >> See >> <https://github.com/N4IRS/AllStar/tree/master/systemd> >> >> 73, Steve N4IRS >> >> On 06/15/2016 04:26 PM, Bryan Fields wrote: >> >> On 6/15/16 4:17 PM, Steve Zingman wrote: >> >> The new version of DIAL will support systemd >> >> Can you share the script? I'll get it >> installed here in the meantime. >> >> Thanks, >> >> >> -- >> "Anything is possible if you don't know what you >> are talking about." >> 1st Law of Logic >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> <mailto:App_rpt-users@ohnosec.org> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter >> your email address and press the "Unsubscribe or >> edit options button" >> You do not need a password to unsubscribe, you >> can do it via email confirmation. If you have >> trouble unsubscribing, please send a message to >> the list detailing the problem. >> >> >> > > -- > "Anything is possible if you don't know what you are talking about." > 1st Law of Logic > > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] asterisk crashing in DIAL
by Steve Zingman 15 Jun '16

15 Jun '16

So, I'm guessing you are having a problem with Ubuntu. That explains the question on the AllStar list " Just wanting to know when we will have the nodesetup script working again.." I think the script runs on Debian. If you are trying to use it on Ubuntu "your mileage may vary" On 06/15/2016 05:33 PM, Loren Tedford wrote: > this is the one i have been trying to use but it has caused me lots of > issues when i pull from allstarlink servers.. > > https://github.com/N4IRS/AllStar/blob/master/platforms/x86/jessie/x86_allst… > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> > http://www.lorentedford.com <http://www.lorentedford.com/> > http://www.kc9zhv.com > http://forum.kc9zhv.com > http://hub.kc9zhv.com > http://www.newwavesucks.com > http://forum.newwavesucks.com > > On Wed, Jun 15, 2016 at 4:30 PM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > https://github.com/N4IRS/AllStar/ > > On Jun 15, 2016 5:27 PM, Loren Tedford <lorentedford(a)gmail.com > <mailto:lorentedford@gmail.com>> wrote: > > Hey Steve could you send me a installation script for x86 > systems I need to reinstall on my ubuntu machine and having > issues.. > > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> > http://www.lorentedford.com <http://www.lorentedford.com/> > http://www.kc9zhv.com > http://forum.kc9zhv.com > http://hub.kc9zhv.com > http://www.newwavesucks.com > http://forum.newwavesucks.com > > On Wed, Jun 15, 2016 at 3:52 PM, Steve Zingman > <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: > > I will be moving both asterisk and updatenodelist to systemd. > See <https://github.com/N4IRS/AllStar/tree/master/systemd> > > 73, Steve N4IRS > > On 06/15/2016 04:26 PM, Bryan Fields wrote: > > On 6/15/16 4:17 PM, Steve Zingman wrote: > > The new version of DIAL will support systemd > > Can you share the script? I'll get it installed here > in the meantime. > > Thanks, > > > -- > "Anything is possible if you don't know what you are > talking about." > 1st Law of Logic > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your > email address and press the "Unsubscribe or edit options > button" > You do not need a password to unsubscribe, you can do it > via email confirmation. If you have trouble unsubscribing, > please send a message to the list detailing the problem. > > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] asterisk crashing in DIAL
by Bryan Fields 15 Jun '16

15 Jun '16

On 6/15/16 4:17 PM, Steve Zingman wrote: > The new version of DIAL will support systemd Can you share the script? I'll get it installed here in the meantime. Thanks, -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

2 1

how you're doing?
by vito＠alsrv.com 15 Jun '16

15 Jun '16

Hi, Just wanted to say hi and ask how you're doing? I'm OK, you may read my latest article here <http://kojogufi.rochesteruncapped.com/aefll> Best regards, vito(a)alsrv.com

1 0

When will the nodesetup script work?
by Loren Tedford 14 Jun '16

14 Jun '16

Just wanting to know when we will have the nodesetup script working again.. root@lorentedford:/etc/asterisk# nodesetup ************************************* * Simple Node Setup Script * ************************************* The system configuration type is the type of hardware and software running on your system (simpleusb, channel_usb) WARNING: Modifying the configuration type on an already set-up system will over-write all existing configuration files!!! If this is an initial installation, you have nothing to worry about. Please make sure you understand these consequences if you choose to change the system configuration type. Would you like your config files be provided by the Allstar Portal server [Y/n]? y This requires you to have already applied for and received an approved Allstar Link Portal user ID, set it up to be a system operator, created an entry for, and properly configured information about this Server, and requested, and received an approved Node entry for each of the Nodes on this Server, and properly configured the inforation for each of the Nodes. Have you estblished and entered the appropriate information on that server [y/N]? y ********************************************* * Allstar Portal Node Setup Script * ********************************************* Do you wish to use the pre-configured user information (user kc9zhv) [Y/n]? y Please select one of the following servers 1) KC9ZHV Repeater Site 2) KC9ZHV 2 meter TX 3) KC9ZHV-DataCenter-HUB 4) kc9zhv 2m dc Please make your selection (1-4): 4 Okay to download config for server kc9zhv 2m dc [Y/n]? y Downloading server kc9zhv 2m dc... Problem with Centos networking setup! Allstar Link Portal Config Download Failed.. exiting root@lorentedford:/etc/asterisk# root@lorentedford:/etc/asterisk# cat /srv/post_install/nodesetup # !/bin/bash # # nodesetup.sh # DRY_RUN=0 PCF_LOCAL=1 CONFIGS=/etc/asterisk TMP=/tmp SENABLE=1 function die { echo "Fatal error: $1" exit 255 } function promptnum { ANSWER="" while [ -z $ANSWER ] || [[ ! $ANSWER =~ [0-9]{3,}$ ]] do echo -n "$1: " read ANSWER done } function promptcall { ANSWER="" while [ -z $ANSWER ] || [[ ! $ANSWER =~ [\/,0-9,a-z,A-Z]{3,}$ ]] do echo -n "$1: " read ANSWER done } function promptyn { echo -n "$1 [y/N]? " read ANSWER if [ ! -z $ANSWER ] then if [ $ANSWER = Y ] || [ $ANSWER = y ] then ANSWER=Y else ANSWER=N fi else ANSWER=N fi } function promptny { echo -n "$1 [Y/n]? " read ANSWER if [ ! -z $ANSWER ] then if [ $ANSWER = N ] || [ $ANSWER = n ] then ANSWER=N else ANSWER=Y fi else ANSWER=Y fi } echo "*************************************" echo "* Simple Node Setup Script *" echo "*************************************" echo echo "The system configuration type is the type of hardware and software" echo "running on your system (simpleusb, channel_usb)" echo echo "WARNING: Modifying the configuration type on an already set-up system" echo "will over-write all existing configuration files!!!" echo "If this is an initial installation, you have nothing to worry about." echo echo "Please make sure you understand these consequences if you" echo "choose to change the system configuration type." echo promptny "Would you like your config files be provided by the Allstar Portal server" if [ "$ANSWER" = "Y" ] then echo echo "This requires you to have already applied for and received an approved" echo "Allstar Link Portal user ID, set it up to be a system operator, created" echo "an entry for, and properly configured information about this Server, and" echo "requested, and received an approved Node entry for each of the Nodes on" echo "this Server, and properly configured the inforation for each of the Nodes." echo promptyn "Have you estblished and entered the appropriate information on that server" if [ "$ANSWER" = "Y" ] then if [ -x /usr/bin/curl ] && [ -e /etc/ssl/certs/ca-certificates.crt ] then TMPF=/tmp/pcf.sh /bin/rm $TMPF > /dev/null 2>&1 curl -L -s https://allstarlink.org/config/portalconfig.sh -o $TMPF if [ $? -ne 0 ] then echo "curl was not able to download necessary script file, sorry." exit 1 fi if [ $PCF_LOCAL -eq 1 ] then cp /usr/local/sbin/pcf.sh $TMPF fi bash $TMPF if [ $? -ne 0 ] then rm $TMPF echo "Allstar Link Portal Config Download Failed.. exiting" exit 1 fi rm $TMPF echo echo "Congradulations! From now on, you will be able to initiate an automatic" echo "download of any Node or Server configuration changes from the Allstar" echo "Portal (just from the Web, without even having to have any sort of terminal" echo "session active to this system)." echo echo "You must now manually re-boot the system for these changes to take place." echo echo "Thank you for using the Allstar Link Network System!" echo exit 0 else echo "curl and its associated cert file(s) can not be found, sorry!" exit 1 fi else echo "Nothing changed!" exit 0 fi fi echo echo "Doing sanity checks on rpt.conf, extensions.conf, iax.conf, and savenode.conf..." if [ -e $CONFIGS/extensions.conf ] then grep -q -s 'NODE =' $CONFIGS/extensions.conf || die "extensions.conf missing NODE=xxxx" NODE=$(grep 'NODE =' /etc/asterisk/extensions.conf | awk -F'= ' '{print $2}' | awk -F' ;' '{print $1}') NODE=$(echo $NODE | awk '{$1=$1}1') else die "$CONFIGS/extensions.conf not found" fi if [ -e $CONFIGS/rpt.conf ] then grep -q -s $NODE $CONFIGS/rpt.conf || die "Node numbers in rpt.conf and extensions.conf are different!" else die "$CONFIGS/rpt.conf not found" fi if [ -e $CONFIGS/iax.conf ] then grep -q -s register\.allstarlink\.org $CONFIGS/iax.conf || die "No allstar link register statement in iax.conf! (old file maybe?)" REG1=$(grep 'register =' $CONFIGS/iax.conf | awk -F'=' '{print $2}' | awk -F' ;' '{print $1}') REG=$(echo "$REG1" | awk -F'@' '{print $1}') REGNODE=$(echo "$REG" | awk -F':' '{print $1}') REGPSWD=$(echo "$REG" | awk -F':' '{print $2}') if [ $REGNODE != $NODE ] then die "Node numbers in rpt.conf and iax.conf are different!" fi else die "$CONFIGS/iax.conf not found" fi if [ -e $CONFIGS/savenode.conf ] then grep -q -s NODE= $CONFIGS/savenode.conf || die "savenode.conf missing NODE=xxxx" grep -q -s PASSWORD= $CONFIGS/savenode.conf || die "savenode.conf missing PASSWORD=xxxx" grep -q -s ENABLE= $CONFIGS/savenode.conf || die "savenode.conf missing ENABLE=x" SNODE=$(grep NODE= $CONFIGS/savenode.conf | awk -F'=' '{print $2}') SPASSWORD=$(grep PASSWORD= $CONFIGS/savenode.conf | awk -F'=' '{print $2}') SENABLE=$(grep ENABLE= $CONFIGS/savenode.conf | awk -F'=' '{print $2}') if [ $NODE != $SNODE ] then die "Node numbers in iax.conf and savenode.conf are different!" fi if [ $REGPSWD != $SPASSWORD ] then die "Passwords in iax.conf and savenode.conf are different!" fi if [ -z $SENABLE ] then die "Enable not fully specified in savenode.conf!" fi fi echo "OK, the format of the files is understandable!" echo ANYNEW=0 NEWNODE="" echo The system node number is: $NODE promptyn "Would you like to change it?" if [ "$ANSWER" = "Y" ] then promptnum "Enter the new node number" NEWNODE=$ANSWER ANYNEW=1 fi NEWPSWD="" echo The registration password is: $REGPSWD promptyn "Would you like to change it?" if [ "$ANSWER" = "Y" ] then promptnum "Enter the new registration password" NEWPSWD=$ANSWER ANYNEW=1 fi ID="" promptyn "Would you like to enter a callsign for the identifier" if [ "$ANSWER" = "Y" ] then promptcall "Please enter your callsign" ID=$ANSWER ANYNEW=1 fi if [ $SAVENODE_ENABLE -ne $SENABLE ] then ANYNEW=1 fi if [ $ANYNEW -gt 0 ] then echo "Copying original files to temporary work area..." cp $CONFIGS/rpt.conf $TMP/rpt.conf.in || die "Could not copy $CONFIGS/rpt.conf" cp $CONFIGS/extensions.conf $TMP/extensions.conf.in || die "Could not copy $CONFIGS/extensions.conf" cp $CONFIGS/iax.conf $TMP/iax.conf.in || die "Could not copy $CONFIGS/iax.conf" if [ -e $CONFIGS/savenode.conf ] then cp $CONFIGS/savenode.conf $TMP/savenode.in || die "Could not copy $CONFIGS/savenode.conf" fi else echo "Nothing to do!" exit 0 fi if [ ! -z $ID ] then echo "Updating rpt.conf with new ID..." sed "s~idrecording[ \t]*=[ \t]*|.*~idrecording = |i$ID\t\t\t; Main ID message~" <$TMP/rpt.conf.in >$TMP/rpt.conf.out mv -f $TMP/rpt.conf.out $TMP/rpt.conf.in || die "mv 1 failed" sed "s~idtalkover[ \t]*=[ \t]*|.*~idtalkover = |i$ID\t\t\t; Talkover ID message~" <$TMP/rpt.conf.in >$TMP/rpt.conf.out mv -f $TMP/rpt.conf.out $TMP/rpt.conf.in || die "mv 1 failed" fi if [ ! -z $NEWNODE ] then echo "Updating rpt.conf iax.conf, and extensions.conf with new node number..." sed "s/$NODE/$NEWNODE/g" <$TMP/extensions.conf.in >$TMP/extensions.conf.out mv -f $TMP/extensions.conf.out $TMP/extensions.conf.in || die "mv 2 failed" sed "s/$NODE/$NEWNODE/g" <$TMP/rpt.conf.in >$TMP/rpt.conf.out mv -f $TMP/rpt.conf.out $TMP/rpt.conf.in || die "mv 3 failed" sed "s/$NODE/$NEWNODE/g" <$TMP/iax.conf.in >$TMP/iax.conf.out mv -f $TMP/iax.conf.out $TMP/iax.conf.in || die "mv 4 failed" if [ -e $CONFIGS/savenode.conf ] then sed "s/$NODE/$NEWNODE/g" <$TMP/savenode.in >$TMP/savenode.out mv -f $TMP/savenode.out $TMP/savenode.in || die "mv 5 failed" fi fi if [ ! -z $NEWPSWD ] then echo "Updating allstar link register statement in iax.conf with new password..." sed "s/$REGPSWD/$NEWPSWD/g" <$TMP/iax.conf.in >$TMP/iax.conf.out mv -f $TMP/iax.conf.out $TMP/iax.conf.in || die "mv 6 failed" if [ -e $CONFIGS/savenode.conf ] then sed "s/$REGPSWD/$NEWPSWD/g" <$TMP/savenode.in >$TMP/savenode.out mv -f $TMP/savenode.out $TMP/savenode.in || die "mv 7 failed" fi fi if [ -e $CONFIGS/savenode.conf ] then sed "s/ENABLE=$SENABLE/ENABLE=$SAVENODE_ENABLE/g" <$TMP/savenode.in >$TMP/savenode.out mv -f $TMP/savenode.out $TMP/savenode.in || die "mv 7 failed" fi if [ $DRY_RUN -eq 0 ] then sed -i 's/; register =/register =/g' $TMP/iax.conf.in # Used the $ in place of the / sed -i 's$;statpost_program = /usr/bin/wget$statpost_program = /usr/bin/wget$g' $TMP/rpt.conf.in sed -i "0,/statpost_url/ s/;statpost_url /statpost_url/" $TMP/ rpt.conf.in echo "Updating original config files..." mv -f $TMP/rpt.conf.in $CONFIGS/rpt.conf || die "mv 8 failed" mv -f $TMP/extensions.conf.in $CONFIGS/extensions.conf || die "mv 9 failed" mv -f $TMP/iax.conf.in $CONFIGS/iax.conf || die "mv 10 failed" if [ -e $CONFIGS/savenode.conf ] then mv -f $TMP/savenode.in $CONFIGS/savenode.conf || die "mv 11 failed" chmod +x $CONFIGS/savenode.conf || die "chmod failed!" fi echo "Config files updated. Done!!" echo else echo "Dry run" echo fi exit 0 Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://www.newwavesucks.com http://forum.newwavesucks.com

1 0

Re: [App_rpt-users] Tait was audio for direct VCO FM
by Steve Wright 13 Jun '16

13 Jun '16

It's a bit tricky finding out what Tait gear will convert to the 6M band. There are LOADS of really great articles on converting a GM300 to 6M. That looks just too easy. Steve

1 0

Problem with Allstar link Default scripts
by Loren Tedford 13 Jun '16

13 Jun '16

Greetings having issues today downloading my config files from the allstarlink portal.. root@lorentedford:/etc/asterisk# nodesetup ************************************* * Simple Node Setup Script * ************************************* The system configuration type is the type of hardware and software running on your system (simpleusb, channel_usb) WARNING: Modifying the configuration type on an already set-up system will over-write all existing configuration files!!! If this is an initial installation, you have nothing to worry about. Please make sure you understand these consequences if you choose to change the system configuration type. Would you like your config files be provided by the Allstar Portal server [Y/n]? y This requires you to have already applied for and received an approved Allstar Link Portal user ID, set it up to be a system operator, created an entry for, and properly configured information about this Server, and requested, and received an approved Node entry for each of the Nodes on this Server, and properly configured the inforation for each of the Nodes. Have you estblished and entered the appropriate information on that server [y/N]? y ********************************************* * Allstar Portal Node Setup Script * ********************************************* Do you wish to use the pre-configured user information (user kc9zhv) [Y/n]? y Please select one of the following servers 1) KC9ZHV Repeater Site 2) KC9ZHV 2 meter TX 3) KC9ZHV-DataCenter-HUB 4) kc9zhv 2m dc Please make your selection (1-4): 4 Okay to download config for server kc9zhv 2m dc [Y/n]? Y Downloading server kc9zhv 2m dc... Problem with Centos networking setup! Allstar Link Portal Config Download Failed.. exiting Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://www.newwavesucks.com http://forum.newwavesucks.com

2 2

Re: [App_rpt-users] audio for direct VCO FM
by Steve Wright 13 Jun '16

13 Jun '16

On 01/06/16 15:46, David McGough <kb4fxc(a)inttek.net> wrote: > As for directly modulating a VCO, that is a complex subject, assuming you > need to stay within frequency and bandwidth tolerances, at is typically > required. If you have a lab full of test equipment available, and are > willing to put in the time designing a proper PLL filter, pulling this off > is very do-able, and many have. Yeah I think you're right there, as others have commented too. A bit awkward. To ebay up a low band maratrac is fine - a $50 radio and $150 freight.. owch.. Steve

6 6

connection timeout timer
by Elden Fenison 12 Jun '16

12 Jun '16

I have an IRLP node and an Allstar node. I'm afraid I'm not very knowledgeable on either. It seems that in the IRLP world it's customary (and considered good etiquette) to have a fairly short (like 20 minute) connection timeout timer. No activity from your node within 20 minutes and the connection will drop. I guess they expect if you're going to dial up a node/reflector that you're going to be making a contact, not just listening. I've read the policy on at least one reflector that says they will ban you for circumventing the connection timeout. Is this also standard in the Allstar world? I don't believe my node times out at all. And I tend to favor camping out on various hubs just to listen. But I want to follow whatever the best practice is. Thanks for your help.

3 2

What happened to last key/unkey
by Skyler F 10 Jun '16

10 Jun '16

I liked the feature on stats.allstarlink.org which showed the last unkey/key. I used a little script that someone made to sort it by the last keyup, so I could see which nodes were talking. Why was this removed from the stats page? 73 SKyler KD0WHB -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

2 1