February 2017 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Thoughts for additional functionality
by Steve 25 Feb '17

25 Feb '17

I agree, talking IRLP is beating a dead horse. The time is better spent working on bridging solutions for DMR, D-Star and the like. I hope that anyone with some coding talent will spend their time in that arena instead. http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

1 0

parallel port use
by George Csahanin 25 Feb '17

25 Feb '17

Steve, is this not in the current distro? I assumed that it was the same source as whet Jim wrote. Or maybe what you mean is to have it now wiggle lines on the serial port, that's outstanding. At any rate, I'm a big fan of the method as any CM108/119, etc US fob can be used. Interface is a 2N2907, etc. So I also standardized on the D945 Intel board (that decision goes back to limey linux) D945GLLY, if I remember correctly. Has a printer port DB25. The Pi is surely smaller. Has anyone ever tried the parallel port interface using one of the USB<--->DB25 adapt-a-trons to see if that would work? GeorgeC W2DB 2360

5 5

Thoughts for additional functionality
by Bryan D. Boyle 23 Feb '17

23 Feb '17

I know it's come up peripherally before, and probably far down the list with everything that's happened...but is there any thought to someday including the ability to generate/detect DCS as well as CTCSS? IIRC, it's in XIPAR, and even the cheap chinese throw-away radios for $15 USD come with the ability to generate and respond. Thoughts? Like I said, probably #100 down the list of 99 things to do, but, if there is a wish list... 73 Bryan WB0YLE/W2FUV Trustee

2 2

Alternatives to cm108/prefab boxes for PTT/COR?
by Jonny 290 23 Feb '17

23 Feb '17

I'll be honest, I have run out of CM108 fobs to modify, and almost all the new ones are epoxy covered. I'd like to put my node back up, but I want a solution that allows me to use a standard USB audio fob for audio in/out and then another fob - probably serial - for PTT and COR. Last I checked (year or two ago), there was no easy answer to this. I hacked and beat on it, didn't get anywhere Have we made any breakthroughs in PTT/COR via serial lately? Thanks in advance!

3 2

Allmon2 - Monitor VS Local Monitor
by larry 22 Feb '17

22 Feb '17

2 2

Re: [App_rpt-users] Help (please) Interfacing to MTR
by Mark Guibord 19 Feb '17

19 Feb '17

Is that a Motorola MTR2000 repeater? If so Let me know I can probably help you. Mark - K7IZA 702-528-4700 -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Barry Buelow Sent: Saturday, February 18, 2017 8:56 AM To: app_rpt-users(a)lists.allstarlink.org Subject: [App_rpt-users] Help (please) Interfacing to MTR If anyone on the list has experience interfacing and programming an MTR, I'd like to chat off list. Thanks Barry w0iy _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

4 3

Re: [App_rpt-users] App_rpt-users Digest, Vol 96, Issue 49
by Barry Buelow 19 Feb '17

19 Feb '17

On 2/18/2017 10:16 PM, app_rpt-users-request(a)lists.allstarlink.org wrote: sorry - I did mean MTR 2000. I'm attempting to use the J5 rear conn Aux I/O to a homebrew CM119B fob to RPi. Reading online docs, but had some difficulty finding things in the menus. Just got the unit to pass audio via asterisk tonight. I think I'm 90% of the way now. If I fall on my face (again) I'll cry for help with more specificity! Thanks for the offers. Barry w0iy > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 18 Feb 2017 08:52:45 -1000 > From: "James R. Pilgram" <jim.pilgram(a)gmail.com> > To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> > Subject: Re: [App_rpt-users] Help (please) Interfacing to MTR > Message-ID: <58a897ff.1121620a.ce775.a827(a)mx.google.com> > Content-Type: text/plain; charset=utf-8 > > MTR?.... MTR2000? > > > Original Message > From: iabarryyy(a)gmail.com > Sent: February 18, 2017 6:57 AM > To: app_rpt-users(a)lists.allstarlink.org > Reply-to: app_rpt-users(a)lists.allstarlink.org > Subject: [App_rpt-users] Help (please) Interfacing to MTR > > If anyone on the list has experience interfacing and programming an MTR, > I'd like to chat off list. > > Thanks > Barry w0iy > > Is that a Motorola MTR2000 repeater? If so Let me know I can probably help you. > > Mark - K7IZA > 702-528-4700 > *******************************

1 0

Help (please) Interfacing to MTR
by Barry Buelow 18 Feb '17

18 Feb '17

If anyone on the list has experience interfacing and programming an MTR, I'd like to chat off list. Thanks Barry w0iy

2 1

RTCM Voter Compiler build fail
by Hayden Honeywood 17 Feb '17

17 Feb '17

Hi All, I've gotten around to building several of the original voter PCB boards (or RTCM). I can easily upload Voter.cry and make the boards work, however I wish to implement "Chuck" squelch which requires a recompile/rebuild. I've spoken with Chuck who said run everything as default (the same as Jim had it) and it should build however I'm getting linker errors even before making the change in HardwareProfile.h. As I'm not much of a programmer - used MPLAB a few times, I was hoping someone else had come across this issue. My steps were - Download latest firmware from svn. Open voter.mcw in MPLAB v8.92 here. MPLAB C30 compiler is installed with 60 day full functionality. Build All > That produces these errors. Helpers.o: Link Error: Could not allocate section .text, size = 2058 PC units, attributes = code DNS.o: Link Error: Could not allocate section .text, size = 1992 PC units, attributes = code UDP.o: Link Error: Could not allocate section .text, size = 1332 PC units, attributes = code UART.o: Link Error: Could not allocate section .text, size = 1274 PC units, attributes = code ARP.o: Link Error: Could not allocate section .text, size = 1040 PC units, attributes = code Telnet.o: Link Error: Could not allocate section .text, size = 942 PC units, attributes = code SPIEEPROM.o: Link Error: Could not allocate section .text, size = 912 PC units, attributes = code squelch.o: Link Error: Could not allocate section .text, size = 824 PC units, attributes = code StackTsk.o: Link Error: Could not allocate section .text, size = 676 PC units, attributes = code ICMP.o: Link Error: Could not allocate section .text, size = 622 PC units, attributes = code IP.o: Link Error: Could not allocate section .text, size = 452 PC units, attributes = code Tick.o: Link Error: Could not allocate section .text, size = 300 PC units, attributes = code Link Error: Could not allocate program memory Link step failed. Has anyone come across this issue?

2 1

Re: [App_rpt-users] archivedir permissions recheck
by David McGough 17 Feb '17

17 Feb '17

BTW, in addition to the open() function call, below, there are a few other spots that need new O_CREAT permissions...Just do a search thru app_rpt.c for the string ",0600" to find them. Change those permissions for something friendlier (like: 0644) and recompile. On Thu, 21 Jul 2016, David McGough wrote: > > Hi Tom, > > Currently, the file permissions are hard-coded in the stock version of > the app_rpt.c code. See line #22084 of app_rpt.c: > > fd = open(fname,O_WRONLY | O_CREAT | O_APPEND,0600); > > So, only the file owner has read/write permission. > > With the stock code, using chmod (perhaps from a cron script?) is the > simplest solution. > > 73, David KB4FXC > > > On Thu, 21 Jul 2016, Tom Hayward wrote: > > > I setup archivedir and am successfully getting recordings. I want to allow > > access to these recordings on a web server. The recordings are in the web > > root and I can browse them. When I try to download a recording, I get > > permission denied because the recording files do not have world-read and > > are owned by root. A chmod solves this, but only for old recordings. New > > files still get mode 0600. How can I change the mode of new files? > > > > Tom KD7LXL > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0