February 2018 - App_rpt-users - lists.keekles.org

Echolink on Allstar
by Alberto Enrique Puig 28 Feb '18

28 Feb '18

Maybe this will help...Check on modules.conf and change the following: ;noload=chan_echolink.so to load=chan_echolink.so ________________________________ From: App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> on behalf of app_rpt-users-request(a)lists.allstarlink.org <app_rpt-users-request(a)lists.allstarlink.org> Sent: Wednesday, February 28, 2018 1:00 PM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 108, Issue 27 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users App_rpt-users Info Page - AllStar Link<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org This list is for users of the app_rpt.c Asterisk application, the Debian Install (for) Allstar Link (DIAL) This site is dedicated to the memory of Jim Dixon WB6NIL or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Echolink on Allstar (W2rjr) 2. Fwd: Echolink on Allstar (W2rjr) ---------------------------------------------------------------------- Message: 1 Date: Wed, 28 Feb 2018 10:50:05 -0500 From: W2rjr <w2rjr(a)aim.com> To: app_rpt-users(a)lists.allstarlink.org Subject: [App_rpt-users] Echolink on Allstar Message-ID: <161dd1b3dc0-17a2-3d9b(a)webjas-vae229.srv.aolmail.net> Content-Type: text/plain; charset="utf-8" Hello, I have an Allstar node on a Raspberry Pi using a sound fob with a modified bofeng 888 ht. Allstar works fine just cant seem to get echolink to work. I have edited the echolink.conf in /etc/asterisk. I have the ports forwarded for the Pi's ip address. Am i missing something ? I have it working on my repeater which runs Dial and copied the file from there. I just changed the Call, the node number and pw and still does not work. Any help would be greatly appreciated. 73 Ray, W2RJR

1 0

Echolink on Allstar
by Alberto Enrique Puig 28 Feb '18

28 Feb '18

Maybe this will help...Check on modules.conf and change the following: ;noload=chan_echolink.so to load=chan_echolink.so ________________________________ From: App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> on behalf of app_rpt-users-request(a)lists.allstarlink.org <app_rpt-users-request(a)lists.allstarlink.org> Sent: Wednesday, February 28, 2018 1:00 PM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 108, Issue 27 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users App_rpt-users Info Page - AllStar Link<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org This list is for users of the app_rpt.c Asterisk application, the Debian Install (for) Allstar Link (DIAL) This site is dedicated to the memory of Jim Dixon WB6NIL or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Echolink on Allstar (W2rjr) 2. Fwd: Echolink on Allstar (W2rjr) ---------------------------------------------------------------------- Message: 1 Date: Wed, 28 Feb 2018 10:50:05 -0500 From: W2rjr <w2rjr(a)aim.com> To: app_rpt-users(a)lists.allstarlink.org Subject: [App_rpt-users] Echolink on Allstar Message-ID: <161dd1b3dc0-17a2-3d9b(a)webjas-vae229.srv.aolmail.net> Content-Type: text/plain; charset="utf-8" Hello, I have an Allstar node on a Raspberry Pi using a sound fob with a modified bofeng 888 ht. Allstar works fine just cant seem to get echolink to work. I have edited the echolink.conf in /etc/asterisk. I have the ports forwarded for the Pi's ip address. Am i missing something ? I have it working on my repeater which runs Dial and copied the file from there. I just changed the Call, the node number and pw and still does not work. Any help would be greatly appreciated. 73 Ray, W2RJR

1 0

Echolink on Allstar
by W2rjr 28 Feb '18

28 Feb '18

Hello, I have an Allstar node on a Raspberry Pi using a sound fob with a modified bofeng 888 ht. Allstar works fine just cant seem to get echolink to work. I have edited the echolink.conf in /etc/asterisk. I have the ports forwarded for the Pi's ip address. Am i missing something ? I have it working on my repeater which runs Dial and copied the file from there. I just changed the Call, the node number and pw and still does not work. Any help would be greatly appreciated. 73 Ray, W2RJR

2 2

(no subject)
by Tim Lovejoy 27 Feb '18

27 Feb '18

Can someone help me get my UriX and Dial to link to my node? I have account setup and done at Allstar site and everything. I am entering c /etc/asterisk/usbradio.conf and other commands, but nothing. I need to get to the questions section for my node setup in Dial after install. I can't get there. Any help please. Thanks Tim Lovejoy,NC8OS Emergency Coordinator-Lorain County,Ohio ARRL-The National Association For 'AMATEUR RADIO' nc8os(a)arrl.net 440-309-7377

2 1

Nodelist.php
by James R. Pilgram 26 Feb '18

26 Feb '18

3 3

RTCM underwater audio...
by Sam Nabkey 25 Feb '18

25 Feb '18

Hello Group! Running latest DIAL image, and updated. Two RTCM's running as Mixed. Both RTCM's will break into a underwater sounding reverbed mess all of a sudden, but not always at the same time. S tarts out small and gets worse the longer the transmitter is keyed.. After the PTT stops, everything returns to normal until it starts again. No pattern, no reason... changed buffer settings on both ends. no joy.. any ideas? Sam

5 10

DTMF Commands via...
by Bob Pyke 25 Feb '18

25 Feb '18

What are the Linux and Asterisk command-line commands to send DTMF commands to a node? Thanks, Bob K6ECM 73

3 2

Simulcast buffer value issue
by Hayden Honeywood 22 Feb '18

22 Feb '18

I'm running a Pi 3 too. Using http://vklink.com.au/ as the image for local use in VK. I logged in shortly after I had a QSO on the repeater and the load average was 0.00, 0.01, 0.00. I also noticed while having another conversation on the repeater this morning, the problem started after 5-10 minutes or so, up to almost 7 syllables. Then the other user went clear for 5 mins, then came back and we continued the conversation with no delay for a further 10 minutes. I've disabled the voter record function in the channel driver for now, just in case that is the issue. I guess I could try another RTCM/Voter unit sitting at the Master site with no radio attached at all purely for timing. Sam - what did you change your buflen too? My current config - buflen = 140 in voter.conf Tx Buffer Length in RTCM's = 1120 Ping to site 2 (slowest site) - Packets tx: 100, rx: 100, oos: 0, Avg.: 33.720 ms Worst: 53 ms, Best: 32 ms, 100.0% Packets successfully received (0.0% loss) Ping to site 1 (master site) - Packets tx: 100, rx: 100, oos: 0, Avg.: 3.450 ms Worst: 4 ms, Best: 3 ms, 100.0% Packets successfully received (0.0% loss) Regards Hayden VK7HH

2 1

Re: [App_rpt-users] A couple of RTCM's for sale
by n7hqzjim＠usermail.com 22 Feb '18

22 Feb '18

Hello! So these these 2 units have been sold to the first responder, Thank you for you time. 73! to all. Jim N7HQZ --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Hello, Due to health issues, I have 2 RTCM thin clients for sale. $350 + shipping. They both work and have never been deployed as I have been dealing with cancer. [ http://www.micro-node.com/store/#!/Allstar-Radio-Thin-Client-Module-RTCM-Li… | http://www.micro-node.com/thin-m1.shtml ] Email me if you're interested in them. I can take PayPal payments. I saw some else do this "for sale" email. So if is not permitted, I apologize. I did look and I didn't see anything that said it was not permitted. Thank you! Jim Sandford N7HQZ

1 0

A couple of RTCM's For Sale
by n7hqzjim＠usermail.com 22 Feb '18

22 Feb '18

Hello, Due to health issues, I have 2 RTCM thin clients for sale. $350 + shipping. They both work and have never been deployed as I have been dealing with cancer. [ http://www.micro-node.com/store/#!/Allstar-Radio-Thin-Client-Module-RTCM-Li… | http://www.micro-node.com/thin-m1.shtml ] Email me if you're interested in them. I can take PayPal payments. I saw some else do this "for sale" email. So if is not permitted, I apologize. I did look and I didn't see anything that said it was not permitted. Thank you! Jim Sandford N7HQZ

2 1