March 2018 - App_rpt-users - lists.keekles.org

suggestions
by ARS W5OMR 21 Mar '18

21 Mar '18

I'm working with 2 nodes, 2 separate machines, both currently on the same network. Both are set the same, using the port of 4569. That's -got- to be a bad thing... Can I just poke a hole in the firewall to, say... 4570 and forward it to the ip of the 2nd node? Is it -really- as simple as that, or... is there some sort of new 'fresh' hell, I'm in for? -- 73 = Best Regards, -Geoff/W5OMR

7 10

need info re: rpt.conf
by George Csahanin 20 Mar '18

20 Mar '18

Hey all- Trying to adjust the time from unkey to start of the idiot beep. Tried adjusting unkeywait and telemwait, makes no difference... Looked thru the source and can't find it or the high and low limits. Any one shed any light on it? i could just eliminate it but I do use it to know if a keyup was local of from a remote node.I just hate waiting for it. ?? Thanks! GeorgeC W2DB 2360, 28599 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

2 1

just found it...
by George Csahanin 20 Mar '18

20 Mar '18

Ever have that moment that you give up, axe for help then it dawns on you where to find it? Yup. Found the unkey wait stuff in app_rpt.c Thanks for reading GeorgeC -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

1 0

Is there way i can access AllStarlink without a node or hardware connected to the computer
by BILLY JOE MEANS 20 Mar '18

20 Mar '18

Is there any way i can Connect to AllStarlink without having a node or Hardware connected to the computer ??? BJ Means

7 11

Announcing AllStarLink Asterisk version 1.01
by Steve Zingman 19 Mar '18

19 Mar '18

We are happy to announce AllStarLink Asterisk version 1.01. This updated version contains a number of bug fixes and enhancements. The method used for installing and upgrading AllStarLink Asterisk has been changed from building from source code to simply install and upgrade the programs that make up AllStarLink Asterisk. AllStarLink Asterisk is now using the same update method any other Debian program has used for years. The package management system is called APT (acronym for Advanced Package Tool). APT is a set of tools for managing Debian packages, and therefore the applications installed on your Debian system. The link on allstarlink.org and the wiki <wiki.allstarlink.org> Now point to the new images for x86/AMD and Raspberry Pi. <http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/ASL_1.01-20180228-am…> <http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228…> The repository of AllStarLink Images is located at <http://dvswitch.org/files/ASL_Images/> For a more complete explanation of the changes to AllStarLink Asterisk see <http://dvswitch.org/files/ASL_Images/readme.txt> 73, Steve N4IRS

8 10

Re: [App_rpt-users] LOG
by ldrolet＠cgocable.ca 19 Mar '18

19 Mar '18

Hello Tim, I just made the command CLI> cdr status and here's what he gives me Thank you Luc raspberry*CLI> cdr status CDR logging: enabled CDR mode: simple CDR output unanswered calls: no raspberry*CLI> Original email: ----------------- From: Tim Sawyer tisawyer(a)gmail.com Date: Sun, 18 Mar 2018 17:19:11 -0700 To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] LOG I think it's already in that distro because of autoload=yes. The *CLI> module show like cdr will confirm that. On Sun, Mar 18, 2018 at 4:59 PM, ldrolet(a)cgocable.ca <ldrolet(a)cgocable.ca> wrote: > Hello, > > Ha GOOD, I'm glad to know that it's possible, > but i look in module.conf and i am not CDR_CSV.so? > can you confirm where I can find this file? I am in / ETC / ASTERISK and > there is this module.conf and here is what I have in this module > > Thank you for your help > > Luc > > > > ; > ; Asterisk configuration file > ; > ; Module Loader configuration file > ; > > [modules] > autoload=yes > noload=chan_oss.so > noload=chan_alsa.so > noload=chan_phone.so > > noload=func_moh.so > noload=res_musiconhold.so > noload=res_speech.so > ;noload=res_crypto.so > noload=res_odbc.so > noload=res_smdi.so > noload=res_config_odbc.so > noload=chan_tlb.so > noload=app_milliwatt.so > noload=app_image.so > noload=app_sendtext.so > noload=format_h264.so > noload=app_hasnewvoicemail.so > noload=app_ices.so > noload=app_lookupblacklist.so > noload=app_voicemail.so > noload=chan_usrp.so > noload=app_lookupidname.so > noload=app_zapateller.so > noload=format_jpeg.so > noload=app_parkandannounce.so > noload=app_meetme.so > noload=app_settransfercapability.so > noload=app_amd.so > noload=app_followme.so > ;noload=chan_echolink.so > noload=app_transfer.so > ;noload=func_callerid.so > noload=app_directed_pickup.so > ;noload=chan_voter.so > noload=app_flash.so > noload=app_page.so > noload=app_gps.so > noload=pbx_dundi.so > noload=app_setcallerid.so > noload=app_dictate.so > noload=res_adsi.so > noload=app_mp3.so > noload=app_privacy.so > noload=app_disa.so > noload=app_alarmreceiver.so > noload=app_externalirv.so > noload=chan_beagle.so > noload=chan_sip.so > [global] > > > > > > Original email: > ----------------- > From: Bryan Fields Bryan(a)bryanfields.net > Date: Sun, 18 Mar 2018 16:22:03 -0400 > To: app_rpt-users(a)lists.allstarlink.org > Subject: Re: [App_rpt-users] LOG > > > On 3/18/18 4:05 PM, ldrolet(a)cgocable.ca wrote: > > It sounds like you need to set up Asterisk Call Detail Records (CDR). > > > > If you Google "iax cdr", or "asterisk cdr setup", you will probably find > > plenty of results. > > > > I imagine you will need to have each of your users assigned a username > and > > context in iax.conf to allow tracking of their usage. > > It's simple to set this up. > > In modules.conf enable cdr_csv.so, and then setup a cdr_manager.conf: > [general] > enabled = yes > > and a cdr.conf > > [general] > enable=yes > unanswered = yes > [csv] > usegmtime=no ; log date/time in GMT. Default is "no" > loguniqueid=yes ; log uniqueid. Default is "no" > loguserfield=yes ; log user field. Default is "no" > > Sighup asterisk and you should be logging CDR to /var/log/asterisk/cdr-csv/ > > 73's > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > -------------------------------------------------------------------- > mail2web.com ? What can On Demand Business Solutions do for you? > https://link.mail2web.com/Business/SharePoint > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/ > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------------------------------------------------------------- mail2web.com ? What can On Demand Business Solutions do for you? https://link.mail2web.com/Business/SharePoint

1 0

Re: [App_rpt-users] LOG
by ldrolet＠cgocable.ca 19 Mar '18

19 Mar '18

Hello, Ha GOOD, I'm glad to know that it's possible, but i look in module.conf and i am not CDR_CSV.so? can you confirm where I can find this file? I am in / ETC / ASTERISK and there is this module.conf and here is what I have in this module Thank you for your help Luc ; ; Asterisk configuration file ; ; Module Loader configuration file ; [modules] autoload=yes noload=chan_oss.so noload=chan_alsa.so noload=chan_phone.so noload=func_moh.so noload=res_musiconhold.so noload=res_speech.so ;noload=res_crypto.so noload=res_odbc.so noload=res_smdi.so noload=res_config_odbc.so noload=chan_tlb.so noload=app_milliwatt.so noload=app_image.so noload=app_sendtext.so noload=format_h264.so noload=app_hasnewvoicemail.so noload=app_ices.so noload=app_lookupblacklist.so noload=app_voicemail.so noload=chan_usrp.so noload=app_lookupidname.so noload=app_zapateller.so noload=format_jpeg.so noload=app_parkandannounce.so noload=app_meetme.so noload=app_settransfercapability.so noload=app_amd.so noload=app_followme.so ;noload=chan_echolink.so noload=app_transfer.so ;noload=func_callerid.so noload=app_directed_pickup.so ;noload=chan_voter.so noload=app_flash.so noload=app_page.so noload=app_gps.so noload=pbx_dundi.so noload=app_setcallerid.so noload=app_dictate.so noload=res_adsi.so noload=app_mp3.so noload=app_privacy.so noload=app_disa.so noload=app_alarmreceiver.so noload=app_externalirv.so noload=chan_beagle.so noload=chan_sip.so [global] Original email: ----------------- From: Bryan Fields Bryan(a)bryanfields.net Date: Sun, 18 Mar 2018 16:22:03 -0400 To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] LOG On 3/18/18 4:05 PM, ldrolet(a)cgocable.ca wrote: > It sounds like you need to set up Asterisk Call Detail Records (CDR). > > If you Google "iax cdr", or "asterisk cdr setup", you will probably find > plenty of results. > > I imagine you will need to have each of your users assigned a username and > context in iax.conf to allow tracking of their usage. It's simple to set this up. In modules.conf enable cdr_csv.so, and then setup a cdr_manager.conf: [general] enabled = yes and a cdr.conf [general] enable=yes unanswered = yes [csv] usegmtime=no ; log date/time in GMT. Default is "no" loguniqueid=yes ; log uniqueid. Default is "no" loguserfield=yes ; log user field. Default is "no" Sighup asterisk and you should be logging CDR to /var/log/asterisk/cdr-csv/ 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------------------------------------------------------------- mail2web.com ? What can On Demand Business Solutions do for you? https://link.mail2web.com/Business/SharePoint

2 1

Re: [App_rpt-users] LOG
by ldrolet＠cgocable.ca 18 Mar '18

18 Mar '18

YES, exactly a .cdr file, that just returned to me with this type of file I had the time of the date of all the stations in addition to repeater that connect to my NODE etc. is it possible to have this type of file with a raspberry PI Thank you to all of you Luc Original email: ----------------- From: Lee Woldanski ve7fet(a)tparc.org Date: Sun, 18 Mar 2018 08:50:51 -0700 To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] LOG Hello Luc, I believe what you are looking for is an Asterisk feature, more than a Hamvoip/Allstar feature. It sounds like you need to set up Asterisk Call Detail Records (CDR). If you Google "iax cdr", or "asterisk cdr setup", you will probably find plenty of results. I imagine you will need to have each of your users assigned a username and context in iax.conf to allow tracking of their usage. Good luck! Lee On Mar 17, 2018 7:08 PM, "Luc Drolet" <ldrolet(a)cgocable.ca> wrote: Hello everyone, What I want to do is to know when I have users who use programs like ZOIPER and IAXRPT, I want to do LOG once a month, to know who uses programs, at the end of each month I would like to know the date and time that will use these programs is it possible with a raspberry PI version 1.5 of Mr. Crompton, I did research on the internet and I can not see anything Thank you for your help Luke Le 17 mars 2018 Ã 20:04, Tim Sawyer <tisawyer(a)gmail.com> a Ã©crit : Yeah, I know. But the HamVoIP types have a menu for common tasks including restarting asterisk so that's easier for them. On Sat, Mar 17, 2018 at 8:31 AM, Bryan D. Boyle <bdboyle(a)bdboyle.com> wrote: > instead of restarting askerisk...you can go into the asterisk CLI, and > type âiax2 reloadâ (without the â â) and do a fresh reload of the isx > config without having to restart the whole repeater...:) > > -- > Bryan > Sent from my iPhone 6S...No electrons were harmed in the sending of this > message. > > > > On Mar 17, 2018, at 09:55, Tim Sawyer <tisawyer(a)gmail.com> wrote: > > In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and > Zoiper login. Duplicate that stanza and then give it new stanza heading > such as [zoiper]. Change the secret if a different one is desired for > zoiper. Then restart Asterisk. > > On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet(a)cgocable.ca> wrote: > >> Hello everyone, >> >> I would like to have LOGS from my used IAXRPT and ZOIPER so they all have >> a different usernames and passwords >> >> with XELATEC we could make these reports, >> but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2- >> 3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type >> of report to find out who is using these programs >> >> my NODE is not connecting with ALLSTAR, it's a private NODE >> I use a raspberry PI 3 >> >> is it possible to make these LOGs >> >> Thank you for your help >> >> Luc >> VE2LUQ >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/c >> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >> the page. Enter your email address and press the "Unsubscribe or edit >> options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. > > > > > -- > Tim WD6AWP > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/c > gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/c > gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------------------------------------------------------------- myhosting.com - Premium Microsoft? Windows? and Linux web and application hosting - https://link.myhosting.com/myhosting

2 1

LOG
by Mike 18 Mar '18

18 Mar '18

Well, there is always more than one way to skin a cat. One way to preform such a feat is to execute a shell script inside the dialplan which opens a log file for appending to which you can record the data you want with a date/timestamp. And perhaps ip address and host data depending on the what and how you are doing things. Sorry, I can't show/send examples of how I have done such a thing as my set-up is quite different and would not apply to yours but plenty of info on the web on executing .sh from the dialplan. But you may want to carry-forward some asterisk $string details to the shell script for easy'r logging. just one more way to do it. Perhaps there are others more to your likeing, ...mike/kb8jnm > Hello everyone, > > I would like to have LOGS from my used IAXRPT and ZOIPER so they all > have a different usernames and >passwords > > with XELATEC we could make these reports,but with ALLSTAR Version > https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe from Mr. Crompton > is it >possible to do this type of report to find out who is using these > programs > > my NODE is not connecting with ALLSTAR, it's a private NODE > I use a raspberry PI 3 > > is it possible to make these LOGs > > Thank you for your help > > Luc > VE2LUQ -- Using Opera's mail client: http://www.opera.com/mail/

1 0

Re: [App_rpt-users] LOG
by Lee Woldanski 18 Mar '18

18 Mar '18

Hello Luc, I believe what you are looking for is an Asterisk feature, more than a Hamvoip/Allstar feature. It sounds like you need to set up Asterisk Call Detail Records (CDR). If you Google "iax cdr", or "asterisk cdr setup", you will probably find plenty of results. I imagine you will need to have each of your users assigned a username and context in iax.conf to allow tracking of their usage. Good luck! Lee On Mar 17, 2018 7:08 PM, "Luc Drolet" <ldrolet(a)cgocable.ca> wrote: Hello everyone, What I want to do is to know when I have users who use programs like ZOIPER and IAXRPT, I want to do LOG once a month, to know who uses programs, at the end of each month I would like to know the date and time that will use these programs is it possible with a raspberry PI version 1.5 of Mr. Crompton, I did research on the internet and I can not see anything Thank you for your help Luke Le 17 mars 2018 à 20:04, Tim Sawyer <tisawyer(a)gmail.com> a écrit : Yeah, I know. But the HamVoIP types have a menu for common tasks including restarting asterisk so that's easier for them. On Sat, Mar 17, 2018 at 8:31 AM, Bryan D. Boyle <bdboyle(a)bdboyle.com> wrote: > instead of restarting askerisk...you can go into the asterisk CLI, and > type “iax2 reload” (without the “ “) and do a fresh reload of the isx > config without having to restart the whole repeater...:) > > -- > Bryan > Sent from my iPhone 6S...No electrons were harmed in the sending of this > message. > > > > On Mar 17, 2018, at 09:55, Tim Sawyer <tisawyer(a)gmail.com> wrote: > > In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and > Zoiper login. Duplicate that stanza and then give it new stanza heading > such as [zoiper]. Change the secret if a different one is desired for > zoiper. Then restart Asterisk. > > On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet(a)cgocable.ca> wrote: > >> Hello everyone, >> >> I would like to have LOGS from my used IAXRPT and ZOIPER so they all have >> a different usernames and passwords >> >> with XELATEC we could make these reports, >> but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2- >> 3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type >> of report to find out who is using these programs >> >> my NODE is not connecting with ALLSTAR, it's a private NODE >> I use a raspberry PI 3 >> >> is it possible to make these LOGs >> >> Thank you for your help >> >> Luc >> VE2LUQ >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/c >> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >> the page. Enter your email address and press the "Unsubscribe or edit >> options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. > > > > > -- > Tim WD6AWP > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/c > gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/c > gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0