March 2018 - App_rpt-users - lists.keekles.org

LOG
by Luc Drolet 18 Mar '18

18 Mar '18

Hello everyone, I would like to have LOGS from my used IAXRPT and ZOIPER so they all have a different usernames and passwords with XELATEC we could make these reports, but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type of report to find out who is using these programs my NODE is not connecting with ALLSTAR, it's a private NODE I use a raspberry PI 3 is it possible to make these LOGs Thank you for your help Luc VE2LUQ

3 6

Re: [App_rpt-users] LOG
by ldrolet＠cgocable.ca 18 Mar '18

18 Mar '18

Hello Tim, I already have different names for each of my users, see part of my IAX.CONF I want to know when it's LOG the date and Heur if possible How can I make LOGs with a Raspberry PI and version of Mr. Crompton 1.5 with a NODE Private Thank you for your help Luc ;------------------------------------------------------------- ;register => 1400:@register.allstarlink.org ;register => xxxxx:yyyyyy@register.allstarlink.org [radio-proxy] type=user ;deny=0.0.0.0/0.0.0.0 ;permit=0.0.0.0/255.255.255.255 context=radio-secure-proxy disallow=all allow=g726aal2 allow=ilbc transfer=no [radio-proxy-out] type=peer host= ; add your node number as username username=1400 ; add your node password as secret secret= auth=md5 disallow=all allow=g726aal2 allow=ilbc transfer=no ;------------------------- ;------------------------- ;------------------------- ; IAXRPT Example ;------------------------ [iaxrpt] user=iaxrpt type=user context=radio-iaxrpt auth=md5 ; add a password of your selection for secret secret=1234 ; *** Important! Change this!!! host=dynamic disallow=all allow=ulaw allow=gsm transfer=no ;-------------------------- ;---DEBUT DES COMPTS iaxrpt----- ;--------------------------- [VE2LUQ] user=iaxrpt type=user context=radio-iaxrpt auth=md5 secret=door host=dynamic disallow=all allow=ulaw allow=gsm transfer=no [VA2RTP] user=iaxrpt type=user context=radio-iaxrpt auth=md5 secret=red host=dynamic disallow=all allow=ulaw allow=gsm transfer=no [VE2ABC] user=iaxrpt type=user context=radio-iaxrpt auth=md5 secret=total host=dynamic disallow=all allow=ulaw allow=gsm transfer=no [VE2LES] user=iaxrpt type=user context=radio-iaxrpt auth=md5 secret=tape host=dynamic disallow=all allow=ulaw allow=gsm transfer=no [VA2VDL] user=iaxrpt type=user context=radio-iaxrpt auth=md5 secret=plug host=dynamic disallow=all allow=ulaw allow=gsm transfer=no [VA2CDY] user=iaxrpt type=user context=radio-iaxrpt auth=md5 secret=meter host=dynamic disallow=cdy allow=ulaw allow=gsm transfer=no [VE2ODB] user=iaxrpt type=user context=radio-iaxrpt auth=md5 secret=rang host=dynamic disallow=all allow=ulaw allow=gsm transfer=no [VE2JMO] user=iaxrpt type=user context=radio-iaxrpt auth=md5 secret=power host=dynamic disallow=all allow=ulaw allow=gsm transfer=no Original email: ----------------- From: Tim Sawyer tisawyer(a)gmail.com Date: Sat, 17 Mar 2018 06:55:40 -0700 To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] LOG In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and Zoiper login. Duplicate that stanza and then give it new stanza heading such as [zoiper]. Change the secret if a different one is desired for zoiper. Then restart Asterisk. On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet(a)cgocable.ca> wrote: > Hello everyone, > > I would like to have LOGS from my used IAXRPT and ZOIPER so they all have > a different usernames and passwords > > with XELATEC we could make these reports, > but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2- > 3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type > of report to find out who is using these programs > > my NODE is not connecting with ALLSTAR, it's a private NODE > I use a raspberry PI 3 > > is it possible to make these LOGs > > Thank you for your help > > Luc > VE2LUQ > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/ > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > the page. Enter your email address and press the "Unsubscribe or edit > options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. -- Tim WD6AWP -------------------------------------------------------------------- mail2web LIVE ? Free email based on Microsoft? Exchange technology - https://link.mail2web.com/LIVE

3 2

Re: [App_rpt-users] iax.conf
by John Rudolph- N2YP 16 Mar '18

16 Mar '18

My issue ended up being that user type needs to be set as friend not peer or user. User only works on the computer version of iaxrpt. The newest version of Zopier doesn't seem to function now with AllStar. They changed the interface and now it acts like making a standard phone call which dials and waits for a connection. I have been unsuccessful in making a transmission using it dispite being registered with the server. Thanks for the help. -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

2 1

node radio
by David Waters 15 Mar '18

15 Mar '18

in order to get my boefing 888 radio to work on my node I had to do the following/in Simpleusb.conf fileI added carrierfrom= usbI has to do this to this line ;ctcssfrom= no If you notice I hade to comment this line out. simply putting no did not workthe radio would not work until i commented the line out.My question is WHY.What am I missing that simply placing no in lind did not work. AND YER I shut down asterisk and restarted it I even rebooted node but didn't work until I commented line out. There has to be something someplace controlling this line or this line must be controlling some other file or line. Any help my brain is turning to mush. Dave AB3MZ

1 0

Re: [App_rpt-users] iax.conf
by Bob Pyke 15 Mar '18

15 Mar '18

I have learned that sometimes the port needs to be added to the IP address. Works on one system without it, but not on another... never figured out why.... worth a try? Thanks, Bob k6ecm 73 Sent from my iPhone > On Mar 14, 2018, at 10:16 PM, vk3antrk <vk3antrk(a)bigpond.com> wrote: > > John. > > I have an Android Galaxy Tab S2 tablet and a 3 year old Android Galaxy S4 mobile phone and I downloaded Android iaxrpt to both devices. > > My mobile phone :- Android iaxrpt works well when connected to my LAN here at home, can do everything, it but will NOT work via my Public IP when I am out and about, the phone will just not register via the Public IP. > > My Android tablet :- Android iaxrpt works well when connected to my LAN here at home but being only a WiFi device it can't work via any Public IP, so what to do ? > > As Android iaxrpt has 10 places to set up 10 different accounts I set position 1 on my Tablet to my local Network and position 2 with the Public IP address of my mobile phone, tethered my Tablet to my mobile phone and set my phone to use my Data ( NOT my LAN ) and my Tablet now works well via my Public IP. > > Conclusion :- my mobile phone must be too old for Android iaxrpt to work in the public domain. Knowing this I can live with it until I get round to buying a new mobile phone ( not a high priority ) and "if" I want to use Android iaxrpt when I'm out and about then I can just tether my Tablet to my mobile. > > If you have a decent Data allowance on your mobile phone then maybe try to set iaxrpt on a Tablet, find the Public IP of your mobile phone, set up iaxrpt with that Public IP on your Tablet then tether that Tablet to your mobile phone, see if that works for you. > > Cheers. > Ron > VK3ANT > > IRLP :- 8916 > Echolink :- 209875 > Allstar :- 28467 > DSTAR and DMR :- On request. > > > > > Sent from Samsung tablet. > > -------- Original message -------- > From: John Rudolph- N2YP <John(a)n2yp.com> > Date: 15/3/18 11:06 (GMT+10:00) > To: app_rpt-users(a)lists.allstarlink.org > Subject: [App_rpt-users] iax.conf > > Ive setup iax.conf and it will work with iaxrpt on my laptop but I can not get it to work on my cellphone with WiFi via iaxrpt or zoipier. Ive double and triple checked the information and ive entered it right. It says no registration for peer 'xxxx' Any thoughts? > -- > Sent from my Android device with K-9 Mail. Please excuse my brevity. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

radio wont work
by David Waters 15 Mar '18

15 Mar '18

Without knowing the full grimy details, I would say first check your logic for COS and PTT. Take just a little time to think it through. The logic you were using before may be different on the radio or the URI. Or both. If both the COS and PTT are reverse, you will never hear a thing squelch open or not. You will never send anything either. Try to set up a test with just the most basic options and no pl. just my thoughts, Not sure what you mean, sorry but i don't know much about this subject. However my original radio worked i just commented out simpleusb stuff to try new radio on usbradio. when it didn't i commented out usbradio stuff and uncommented simpleusb again. the original shoul have worked like before but it didn't it stuck in transmitt mode like the new one I tried.

2 2

iax.conf
by John Rudolph- N2YP 15 Mar '18

15 Mar '18

Ive setup iax.conf and it will work with iaxrpt on my laptop but I can not get it to work on my cellphone with WiFi via iaxrpt or zoipier. Ive double and triple checked the information and ive entered it right. It says no registration for peer 'xxxx' Any thoughts? -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

5 4

New radio adapter compatible with AllStar Link - including hardware TX CTCSS logic control.
by Kevin Custer 15 Mar '18

15 Mar '18

Masters Communications has released a new USB radio adapter compatible with AllStar Link - the RA-42. This adapter is patterned after our popular RA-35, but it includes two extra control potentiometers for mechanically setting the TX audio levels, and it has a open collector logic output (sourced from either GPIO 4 or 8) intended for gating a hardware CTCSS encoder. This GPIO logic output also drives a LED which illuminates upon asserting the GPIO high. While the adapter is designed for TX CTCSS logic control, the logic output can be used for anything that an open collector NPN BJT can switch - even keying a relay. Any software can be used as long as it has the capability of toggling the GPIO of the CM119A. This logic is jumper enabled, and can be routed to pin 7 on the DB9 connector. Since there aren't enough pins on the DB9 to bring this function out to its own individual pin, its routed to the DB9 as a jumper selectable option. One position (JU3-A) puts the internal controls revert option to pin 7, while JU3-B puts the TX CTCSS logic to DB9 pin 7. If a user only wanted a LED as a status indicator, the jumper position is unimportant, as the yellow LED will illuminate no matter the position or existence of JU3. This function and logic output can be used for other things needing a buffered GPIO; it's not necessarily a TX CTCSS only function. Simply program your system to toggle either GPIO 8 [default] (or GPIO 4 by re-configuring the jumper), and the logic developed will follow. More can be seen by going to the web site and selecting the RA-42 link. The product is available immediately, and, as always, there's easy PayPal ordering. http://www.masterscommunications.com/ Please refresh your browser if you don't see the link. Questions or comments welcomed. Thanks, Kevin W3KKC

1 0

Radio connecte to allstar node
by David Waters 15 Mar '18

15 Mar '18

Hi and HelpI built an allstar node about 2 months ago. The node worked right away but the radio attached to it did not work. I messed with it for 3 weeks.I finally got it working by replacing the modified sound fob i bought online with a DMK URI interface.It was working great until yesterday. I decidec to upgrade to a better more powerful radio and now no radio will work.My original setup wasboefing BF888 hand held radioDMK URIUsing simpleusb. I decided to upgrade to an Alinco DR453 radio no tnc card installed.Same DMK URISwitched eberything over to usbradio as per the instructiondSet usbradio.config file as instructed carrierfrom= usbinvert ctcssfrom= noRadio went into constant transmitt mode. Everything we tried did not correct the problem. We decided to switch back to what was working,simpleusb with the boefing 888 radio.We put back every file the was it originally was and nor the 888 radio stays in constant transmitt.I finall after 14 hours dicided to diconect the radio and uri from the node. radio was overheating.So no we have a node that works except for no way to access it with a radio. My son has an echolink account and can dial in that way. I have an spp that will let me connect to my node and call up other nodes but my app will not let me talk. I only mention this to show that the node is working except for the radio part.I have searched till my computer overheated and found no help with my problem. everyone says as soon as i hool up thr uri and radio it will start working------------No it oesn't. I definately am missing something. Please help keep in mind I no nothing of the software or very little commands, everything i did to get node running was fron info off the internet. However the radio problen doesn"t show up online. DaveAB3MZ

2 1

Stretch
by Dan Srebnick 14 Mar '18

14 Mar '18

Is the github DIAL project ready to be built on Debian/Raspbian Stretch? Steve mentioned a while back that he was going to be working on it. 73, Dan Srebnick K2DLS

2 2