March 2019 - App_rpt-users - lists.keekles.org

Audio stream active before PTT
by jcarl.griffith＠gmail.com 04 Mar '19

04 Mar '19

I was wondering if there's a way to delay PTT for 200 milliseconds (but not the audio stream) so that my ALC can properly level out before anything is heard on the repeater? Another option I was thinking about would to have a tone or white noise or anything really keep the ALC busy and leveled during times of non-transmit. Anyone have an idea? John N7OKN

1 0

Grand Canyon
by jimmy keffer 03 Mar '19

03 Mar '19

does anyone know of any nodes near the Grand Canyon thanks

1 0

Phone Portal
by Mike 02 Mar '19

02 Mar '19

I am trying to use the phone portal and I get a busy tone when connecting to my node. What do I have set wrong? I have it turn on in the Allstar setup. And I have port 4569 set to my node. Mike N8XYM

1 0

rpt reload?
by jimmy keffer 02 Mar '19

02 Mar '19

should rpt reload from cli i get no output from the command running debian 9 64 asl installed from apt-get thanks jimmy ka3vgm

2 2

Help with Allstar registration
by Rodger Hanson 02 Mar '19

02 Mar '19

Hello All I've been battling with my allstar node, and noticed this in the asterick client cli: [Mar 2 13:54:45] NOTICE[395]: chan_iax2.c:9839 socket_process: Registration of '49801' rejected: 'Registration Refused' from: '44.98.254.145' zl1rah-papakura*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 44.98.254.145:4569 Y 49801 <Unregistered> 60 Rejected Can somebody please tell me how to sort this problem out? Kind Regards, Rodger Hanson [ZL1RAH] Tel: +64 9 278-8683 Mob: +64 27 5687659 Email: rodger_hanson(a)slingshot.co.nz Web: https://zl1rah.blogspot.co.nz/ QRZ: https://qrz.com/db/zl1rah /Please consider the environment before printing this email/

4 3

HELP! Trying to compile asterisk
by George Csahanin 02 Mar '19

02 Mar '19

Folks, I'm lost. In the past I'd pull the source from Jim's sorce repository, and all worked fine. I needed to add something to app_rpt so pulled the source from github, installed it under /usr/src in my Pi. Got ncurses installed. go to asterisk/ and run ./configure, it runs, then make menuselect, it makes the menu and I unselect stuff like beagle that isn't needed, etc. Then run make in same directory. It runs but get a failure at "recipe for target 'aelparse' failed...then another fail at "recipe for target 'utils' failed What am I doing incorrectly. I've done this lots of times in the past but these sources have some kind of difference I cannot figure out. The specific thing I'm changing is the morse speed, I run it up to 30 WPM. The Quantar itself does the 20WPM ID. But I have the asterisk doing a 30 WPM ID with node number, so I can tell what I'm listening to. I've been fighting this for hours now and tried re-using sources from my Limey distro I upgraded a few months ago, that also doesn't run. Oh, tried running it from one level up but the make choices are for usbradio, etc but not for simpleusb... make upgrade - build and install sources only make install_pciradio - build and install sources plus pciradio config files make install_usbradio - build and install sources plus usbradio config files make install_wcte11xp - build and install sources plus single span wcte11xp config files make install_wct1xxp - build and install sources plus single span t100p config files make svsrc - save the sources on the CF as astsrc.tgz make ast_build_only - build asterisk only, do not install make clean - delete all object files, intermediate files, and executables Tried make ast-build-only (BTW, that's labeled incorrectly in .help, it isn't ast_build_only...its ast-build-only) and it errors on zaptel ("can't cd to zaptel") tried make usbradio too and same zaptel error. Doing this all as root, so not a permission issue. Anybody??? Thanks GeorgeC W2DB 2360 28599 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

1 0

Allstar Analytics
by Jeff Lehman 01 Mar '19

01 Mar '19

Hi Everyone! Off the wall question. Does anyone have any kind of a framework to be able to capture data points for analytics from an Allstar system? For example, I want to look at things like who connects, how often, how often a node keys up, length of time of a connection things like that. I didn't know if anyone has gone down this road before. I don't even know/think something like this is possible but I thought I would ask. If I have to build from scratch, that's fine, but always open to suggestions. Thanks! Jeff, KC8QCH -- Jeff Lehman, KC8QCH E-mail: kc8qch(a)gmail.com Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc(a)gmail.com Phone: 513-452-6480 Multimode System Administrator World Wide Amateur Radio Guild *https://hamradiohub.com/ <https://hamradiohub.com/>* E-Mail: kc8qch(a)hamradiohub.me

1 0