March 2019 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] compiling asterisk
by George Csahanin 23 Mar '19

23 Mar '19

Mike, I really hate Arch Linux... and will never use “brand x” distro with all their Chinese simplex nodes... That said, my third message yesterday was that I did finally get it to compile but needed to de-select simpleusb. Something is funny with the makefile for that. And the issue just isn’t jumping out at me. I also had to change permissions on all the files in the sources. In haste I just made them all 777. Still didn’t work till I also chmod -R .* at which point the only problem was simpleusb. I need that but I’m limping along with usbradio fir now, but it has the usual “holes” in the audio. I followed the instructions in the README file. Like I said, when I’d pull the sources from Jim Duuuude’s SVN in the past it all compiled ok. Thanks fir the suggestions but the only issue I see now is simpleusb. I figured out the work around fir the rest. And I ran this all as root. Hate sudo... GeorgeC W2DB George Csahanin Retired Sent from my iPhone > On Mar 22, 2019, at 4:36 PM, Mike <mm(a)midnighteng.com> wrote: > > 2 questions.... > > Are you using a HamVOIP image ? > if not > Did you place a hold on the kernel headers before applying updates ? > > http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228… > > Login: repeater > Passsword: allstarlink > SSH port: 22 > User repeater has sudo privileges (sudo -s) > > There may have been updates to the operating system and AllStarLink since this image was built. > Run the following commands after the first time you boot. > > sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel > sudo apt-get update > sudo apt-get upgrade -y > sudo reboot > > at the # prompt run "asl-menu" to setup your node. > > ...mike/kb8jnm > >> On 3/22/2019 4:35 PM, George Csahanin wrote: >> OK folks. I've tried everything I know how to do to recompile asterisk with my mod to app_rpt.c and am at wit's end. Just tried fresh today on a fresh install of the Allstarlink 1.01 on a Pi3 (the distro works fine). I made sure that gcc and g++ 4.9 were installed. Then did: >> git clone https://github.com/AllStarLink/Asterisk.git >> Then in asterisk/ did ./configure CXX=g++-4.9 CC=gcc-4.9 >> Then did make >> Blows up. Needed to delete menuselect.makeopts (not unusual) so deleted and start over. >> Blows up at need termcap...I re-installed libncurses-dev >> Gets past that and blows up at chan_pi, go into menuselect and unselect pi, try again >> Blows up now at chan_beagle, unslect that and try again >> Blows up at chan_simpleusb, unselect try again >> Blows up at: >> Makefile:361:recipe for target "main" failed >> Running this as root. Also for grins (assuming a permissions issue) did chmod -R 777 * >> Didn't help. >> The README says this is what was used to make 1.01 >> WHAT am I doing incorrectly?? >> Used to be I'd recompile asterisk with zero issues. >> Can anyone give me any pointers? >> GeorgeC W2DB 2360, 28599, etc >

1 0

compile update
by George Csahanin 23 Mar '19

23 Mar '19

I got it to compile but only if I use usbradio, simpleusb gives a fault as in my previous message The problem with usbradio is that it has lots of "holes" in the audio. GeorgeC W2DB -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5710 office 401-338-0568 cel george(a)w2db.com

1 0

compiling asterisk
by George Csahanin 22 Mar '19

22 Mar '19

OK folks. I've tried everything I know how to do to recompile asterisk with my mod to app_rpt.c and am at wit's end. Just tried fresh today on a fresh install of the Allstarlink 1.01 on a Pi3 (the distro works fine). I made sure that gcc and g++ 4.9 were installed. Then did: git clone https://github.com/AllStarLink/Asterisk.git Then in asterisk/ did ./configure CXX=g++-4.9 CC=gcc-4.9 Then did make Blows up. Needed to delete menuselect.makeopts (not unusual) so deleted and start over. Blows up at need termcap...I re-installed libncurses-dev Gets past that and blows up at chan_pi, go into menuselect and unselect pi, try again Blows up now at chan_beagle, unslect that and try again Blows up at chan_simpleusb, unselect try again Blows up at: Makefile:361:recipe for target "main" failed Running this as root. Also for grins (assuming a permissions issue) did chmod -R 777 * Didn't help. The README says this is what was used to make 1.01 WHAT am I doing incorrectly?? Used to be I'd recompile asterisk with zero issues. Can anyone give me any pointers? GeorgeC W2DB 2360, 28599, etc -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

2 1

...more on re-compile
by George Csahanin 22 Mar '19

22 Mar '19

Tried a make clean Looked at the menu and saw that app_rpt was not selected by default so tried again all over Now it gets to fail at: */Wrote ringtone.h/**/ /**/ [LD] chan_echolink.o -> chan_echolink.so/**/ /**/ [LD] chan_skinny.o -> chan_skinny.so/**/ /**/ [LD] chan_agent.o -> chan_agent.so/**/ /**/ [CC] chan_simpleusb.c -> chan_simpleusb.o/**/ /**/ [CC] chan_oss.c -> chan_oss.o/**/ /**/chan_simpleusb.c:56:17: fatal error: usb.h: No such file or directory/**/ /**/ #include <usb.h>/**/ /**/ ^/**/ /**/compilation terminated./**/ /**/ [LD] chan_iax2.o iax2-parser.o iax2-provision.o -> chan_iax2.so/**/ /**//usr/src/Asterisk/asterisk/Makefile.rules:42: recipe for target 'chan_simpleusb.o' failed/**/ /**/make[1]: *** [chan_simpleusb.o] Error 1/**/ /**/make[1]: *** Waiting for unfinished jobs..../**/ /**/make[1]: Leaving directory '/usr/src/Asterisk/asterisk/channels'/**/ /**/Makefile:361: recipe for target 'channels' failed/**/ /**/make: *** [channels] Error 2/* searched in source tree for usb.h and there is none. Wearing a flat spot on my head... GeorgeC -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

1 0

using RFshark Openspot2
by clintg777＠1791.com 21 Mar '19

21 Mar '19

Would it be possible to use a RFshark Opensop2 to access the ALLStar network?

5 5

Re: [App_rpt-users] Auto-congesting call due to slow
by Marty 20 Mar '19

20 Mar '19

Sorry yes it is hamvoip distro, very sorry to trouble you all! I will take it up with them. between both distro's are pretty good! I just wish we all can get on the same page because both together would make a nice distro package! 73, Marty --------------------------------------- Message: 4 Date: Tue, 19 Mar 2019 08:22:38 -0700 From: Tim Sawyer<tisawyer(a)gmail.com> To: Users of Asterisk app_rpt<app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Auto-congesting call due to slow response, then connection failed Message-ID: <CAG3ht9t2FuqUBXj4H67SSw6ThFzG_YsejzFGKxjCtPOes+M_Bg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Both inbound and outbound connections need rpt_extnodes to work. We don't put a link to the tmp directory for rpt_extnodes in our distro. I suspect, as Marshal mentioned, you're running the hamvoip distro. You'll need to contact them if you haven't already for support.

3 2

GE Mastr III and DMK USB-URI
by Bret Taylor 20 Mar '19

20 Mar '19

Has anyone successfully interfaced the DMK USB-URI to a GE Mastr III repeater/base station? I've got transmit working correctly, but can seem to get the received audio back into the device correctly. Thanks for any help you can provide. --Bret Taylor Olympia School District

6 11

Re: [App_rpt-users] Auto-congesting call due to slow response, then connection failed
by Marty 19 Mar '19

19 Mar '19

in my directory /var/lib/asterisk/rpt_extnodes rpt_extnodes -> /tmp/rpt_extnodes appears as a link and I get tail: cannot open '/tmp/rpt_extnodes' for reading: No such file or directory Also I'll ask 29103 to check his whitelist. Where would I look and check about accepting inbound connects? TNX!---Marty KD4HLV On 3/19/19 8:00 AM, app_rpt-users-request(a)lists.allstarlink.org wrote > Message: 2 > Date: Mon, 18 Mar 2019 09:00:36 -0700 > From: Tim Sawyer <tisawyer(a)gmail.com> > To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> > Subject: Re: [App_rpt-users] Auto-congesting call due to slow response > then connection failed > > Are you getting the nodes list? Take a look > for /var/lib/asterisk/rpt_extnodes. At the bottom of the file there should > be a current timestamp. > > For example: > >> tail /var/lib/asterisk/rpt_extnodes > ;Generated 3251 records in 0.063 seconds. > ;Served in 0.015 seconds. > ;Served from cache: Yes > ;Generated at 2019-03-18 15:57:31 UTC by register-ord.allstarlink.org > > >

5 4

Auto-congesting call due to slow response then connection failed
by Marty 18 Mar '19

18 Mar '19

I am having trouble connecting to to a certain node every time I get connect failed every time. But the node can connect to me every time. Sounds like port fwd issues from them? I can connect to everyone node that is registered. From what I know we are both registered in the system and listed in the Allstar Link Node List. I have attached the CLI output below. This has been happening awhile, just never figured it out, but have been trying and decided to send to the group if anyone else seen this issue. Anyone have a clue on this one? 73, Marty KD4HLV 28523 -------------------------------------------- asterisk -r 28523*CLI> rpt fun 28523 *329103 ??? -- Hungup 'DAHDI/pseudo-1821375373' [Mar 13 08:16:33] NOTICE[23209]: chan_iax2.c:4099 __auto_congest: Auto-congesting call due to slow response ??? -- Hungup 'IAX2/xxx.xxx.xxx.xxx:4569-4411' Then I get the connection failed response. --------------------------------------------

3 3

Cannot link the repeater node and the echolink pseudo node within the allstar server
by Red Digital del Noroeste A.C. XE2DNN 18 Mar '19

18 Mar '19

I configured both nodes in thr server, one for the VHF repeater (Using the DMNK URI) and one more for the echolink pseudonode, the repeater part works fine, but I cannot link both nodes togheter, echolink.org shows my pseudo node active and connected and it accepts connections from other systems like my echolink app on my iphone, but between both nodes it cannot be possible to connect them even using the macro at startup, this is the log from the asterisk console: Node 47220 is the one for the USB interface and node 47222 is the pseudonode for echolink, what is missing ? Thanks in advance Alex N2IX / XE2BSS *[Mar 17 19:29:40] WARNING[11512]: app_rpt.c:21520 rpt_exec: Trying to link to self!!* == Spawn extension (radio-secure, 47220, 1) exited non-zero on 'IAX2/127.0.0.1:4569-830' -- Hungup 'IAX2/127.0.0.1:4569-830' -- Hungup 'IAX2/127.0.0.1:4569-5946' -- Hungup 'DAHDI/pseudo-1557055493' -- Hungup 'DAHDI/pseudo-1867385497' -- <DAHDI/pseudo-671042740> Playing 'rpt/node' (language 'en') -- <DAHDI/pseudo-671042740> Playing 'digits*/4'* (language 'en') -- <DAHDI/pseudo-671042740> Playing 'digits/*7*' (language 'en') -- <DAHDI/pseudo-671042740> Playing 'digits*/2*' (language 'en') -- <DAHDI/pseudo-671042740> Playing 'digits*/2' *(language 'en') -- <DAHDI/pseudo-671042740> Playing 'digits*/2*' (language 'en') -- <DAHDI/pseudo-671042740> Playing 'rpt/connection_failed' (language 'en') -- Hungup 'DAHDI/pseudo-671042740'

2 8