March 2019 - App_rpt-users - lists.keekles.org

ASL manually installing
by Russell Thomas 07 Mar '19

07 Mar '19

I've done this in the past but i'm getting an error now. I'm installing ASL manually from this wiki article: https://wiki.allstarlink.org/wiki/ASL_FAQ The very last line is getting this?: root@ip-172-31-26-10:/tmp# apt-get install allstarlink -y Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: allstarlink : Depends: asl-asterisk but it is not going to be installed E: Unable to correct problems, you have held broken packages. Does anyone have any ideas? It's an Ubuntu image on AWS which i've done in the past as well. 73, Russell Thomas, KV4S Cell: 205.202.1701 DMR TG: *3101393 *| YSF: *US KV4S* | D-STAR: *KV4S* Allstar: *47923 *| IRLP: *4535 *| EchoLink: *KV4S-L* Web: http://KV4S.com

1 1

Telemetry /
by jimmy keffer 06 Mar '19

06 Mar '19

if have a node connrd to a very large network can i set my node my node not to play all connects to network thanks jimmy ka3vgm

2 1

figured out part of my problem compiling asterisk
by George Csahanin 06 Mar '19

06 Mar '19

The only sources I found turn out to be Limey Linux distro. Looking on github.com/allstarlink and I just don't see any other. Can anyone point me at the sources? I need to ftp it or wget it into /usr/src so I can compile. GeorgeC W2DB 2360, 28599 and more... --- This email has been checked for viruses by AVG. https://www.avg.com

2 1

Question about USB-URI
by Bret Taylor 06 Mar '19

06 Mar '19

I'm trying to interface a USB-URI to a JPS Communications NXU-2a ( https://jps.sugarmapleinteractive.com/wp-content/uploads/2016/04/NXU-2A-Man… - Page 2-8 for pin out). USB-URI NXU-2A ------------- ------------ 13 - Ground ----> 1,15 - Ground 22 - Output ----> 6,14 - Input 21 - Audio In ---> 8 - Audio Out No COR, and no PTT. Will the USB-URI still work? What Group ID will be generated? I'm using TL-Net to bridge two of these together. (The other USB-URI is connected to a GE MASTR III Base Station) Thanks, --Bret Taylor Olympia School District

2 1

Link Question
by David Wilcox 06 Mar '19

06 Mar '19

Help Please I'm using a handset radio to control a remote repeater the problem I'm having is when the handset releases it hears the output from the repeater and goes in to Transmit release and transmit cycle that won't stop, is there a setting in the rpt.conf that would cure this Thanks for any help Dave Kd9bvf

3 2

Re: [App_rpt-users] App_rpt-users Digest, Vol 121, Issue 5
by Guillermo Sobalvarro 06 Mar '19

06 Mar '19

Hello Rodger. I had the same problem with the WX and had to poke around all files in supermon until I resolved the problem. All you have to do is edit the global.inc file. The last lines say: // Show weather conditions and temperature for Zip code area $LOCALZIP = "SKMD"; Mine is SKMD, which corresponds to my nearest airpot. Find the airport abreviation for your nearest one, save the file and restart from the browser. You should now have the correct WX info. 73 de Guillermo - HK4KM Message: 1 Date: Wed, 06 Mar 2019 11:42:15 +1300 From: Rodger Hanson <rodger_hanson(a)slingshot.co.nz> To: app_rpt-users(a)lists.allstarlink.org Subject: [App_rpt-users] Supermon Weather Settings Message-ID: <375054ef34d555249e9bb36e7822d2cd(a)slingshot.co.nz> Content-Type: text/plain; charset=US-ASCII; format=flowed Hello All I have my AllStar up and running, setup supermon, and found that the weather settings seem to be limited to USA, which perhaps is a bit short sighted since there are people all over using Allstar & supermon. Is there a way to put in my weather "zip code" for Auckland, New Zealand? I just could find any document about setting up outside the USA. Any help with this would be appreciated. Otherwise, the Allstar from Hamvoip works well, after sorting out my power problem. Thanks guys for the great work. -- Kind Regards, Rodger Hanson Tel: +64 9 278-8683 Mob: +64 27 5687659 Email: rodger_hanson(a)slingshot.co.nz Web: https://zl1rah.blogspot.co.nz/ _Please consider the environment before printing this email_ ------------------------------ Message: 2 Date: Wed, 6 Mar 2019 00:58:02 +0000 From: Jim Nessen <nessenj(a)jimsoffice.org> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Supermon Weather Settings Message-ID: <MWHPR1301MB2126EA56DB227670EA97BCE8D9730(a)MWHPR1301MB2126.namprd13.prod.outlook.com> Content-Type: text/plain; charset="us-ascii" Your question is probably better suited for the official hamvoip mailing list You can subscribe by visiting http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Jim, K6JWN -----Original Message----- From: App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> On Behalf Of Rodger Hanson Sent: Tuesday, March 5, 2019 2:42 PM To: app_rpt-users(a)lists.allstarlink.org Subject: [App_rpt-users] Supermon Weather Settings Hello All I have my AllStar up and running, setup supermon, and found that the weather settings seem to be limited to USA, which perhaps is a bit short sighted since there are people all over using Allstar & supermon. Is there a way to put in my weather "zip code" for Auckland, New Zealand? I just could find any document about setting up outside the USA. Any help with this would be appreciated. Otherwise, the Allstar from Hamvoip works well, after sorting out my power problem. Thanks guys for the great work. -- Kind Regards, Rodger Hanson Tel: +64 9 278-8683 Mob: +64 27 5687659 Email: rodger_hanson(a)slingshot.co.nz Web: https://zl1rah.blogspot.co.nz/ _Please consider the environment before printing this email_ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 3 Date: Wed, 6 Mar 2019 00:32:57 -0600 From: "David Wilcox" <wilcoxdl(a)charter.net> To: <App_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] Link Question Message-ID: <000001d4d3e6$707d5db0$51781910$(a)charter.net> Content-Type: text/plain; charset="us-ascii" Help Please I'm using a handset radio to control a remote repeater the problem I'm having is when the handset releases it hears the output from the repeater and goes in to Transmit release and transmit cycle that won't stop, is there a setting in the rpt.conf that would cure this Thanks for any help Dave Kd9bvf

1 0

Supermon Weather Settings
by Rodger Hanson 06 Mar '19

06 Mar '19

Hello All I have my AllStar up and running, setup supermon, and found that the weather settings seem to be limited to USA, which perhaps is a bit short sighted since there are people all over using Allstar & supermon. Is there a way to put in my weather "zip code" for Auckland, New Zealand? I just could find any document about setting up outside the USA. Any help with this would be appreciated. Otherwise, the Allstar from Hamvoip works well, after sorting out my power problem. Thanks guys for the great work. -- Kind Regards, Rodger Hanson Tel: +64 9 278-8683 Mob: +64 27 5687659 Email: rodger_hanson(a)slingshot.co.nz Web: https://zl1rah.blogspot.co.nz/ _Please consider the environment before printing this email_

2 1

Rigblaster (Repost)
by Robert Hanssen 05 Mar '19

05 Mar '19

Re-posting of my message to the group which was accidentally formatted using HTML, my apologies. Greetings to the group, I've extensively reviewed the Allstar Link documentation but can't find a definitive answer to my question. Can Allstar be used with an interface such as the Rigblaster Nomic (PTT) in conjunction with an built in PC soundcard? Here is a link to the interface I am referring to: http://www.westmountainradio.com/pdf/nomicman4.pdf Any information is greatly appreciated. Thanks to the group for all the informative technical information provided on the list. Regards, R. Hanssen

3 2

Limey Unix
by Todd Lesser 05 Mar '19

05 Mar '19

Does anyone know how to save the network configuration in Limey Linux? My node is currently set up as static IP and I want to change it to DHCP. I run net setup but when I reboot, it loses it all. I assume there is a command that will save it to flash memory. Does anyone know what that is? Thanks

4 4

Rigblaster
by Robert Hanssen 04 Mar '19

04 Mar '19

1 0