- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Got a strange error in my AT&T gateway
by ars.w5omr＠gmail.com 30 Jul '17

30 Jul '17

Steve Gibson, the guy that gave us SpinRite back in the DOS days, has a much better port scanner. I wanna say his site is Gibson research Inc, or, GRC dot com, but research would help. On Jul 29, 2017 7:29 PM, David Shaw <shawpbx(a)gmail.com> wrote: > > I saw your post from the att forum dated back in Sept 2016. So your router detected a php hijacking and blocked the packet. That's ok. But.. I would guess your getting attacked all around and over loading your router. If you have a consumer-grade router. I would call att and see if they have anyway of looking to see if your being attacked. Getting a new IP address should help. Login to your router check to see what your WAN/Public IP address. > > > Try powering off your Router and ASL Node for 3-5 minutes. > > Some hackers testing your IP address and router. > > The power off is to hopefully get a new IP address. > > Google online port scanner. Find one a scan your router to see if any of your ports our open. It should show no port. Filtered ports are bad as well. > > David KE6UPI > > PS: If your into playing with routers and making your own. Try OPNsense. > https://opnsense.org/ > > I use Sophos with a free home lic. > > > > -- > Thanks, David > > "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." > Thomas Jefferson > > On Sat, Jul 29, 2017 at 10:29 AM, George Csahanin <george(a)dyb.com> wrote: >> >> Hi all. I've been seeing a daily reboot of my AT&T gateway, has done it three times now. Looked at the logs in the AT&T box and I see several: >> >> host=stats.allstarlink.org url=/uhandler.php hijacked >> >> Anybody know what this might mean? >> >> GeorgeC >> >> >> -- >> George Csahanin >> 10100 Carson Ranch Rd. >> Crowley, TX 76036 >> 682-708-5716 home >> 401-338-0568 cel >> http://dyb.com >> PLEASE NOTE: Effective January 1, 2018 george(a)dyb.com will no longer function >> USE george(a)w2db.com >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > >

1 0

Release of AutoSkyWarn 5
by Steve Mahler 29 Jul '17

29 Jul '17

AutoSkyWarn Version 5M is now ready for release. Available at http://kizzy03.wixsite.com/kf5vh/auto-skywarn AutoSkyWarn (ASW) is designed to couple SkyWarn Operations with AllStar Servers / Nodes. ASW is a program / shell script (developed to run on the AllStar DIAL distribution for PCs) allowing an AllStar Server and Node to automatically report and announce about 50 National Weather Service (NWS) Warnings, Watches, Advisories and Statements as they occur. You can access the Overview and ReadMe1st first documents at http://kizzy03.wixsite.com/kf5vh/auto-skywarn and also on that site you can hear 3 sounds clips of messages produced by ASW. This release is for someone that has worked with UNIX/Linux systems as superuser. There are installation notes, but no step by step installation guide. (There is an effort to integrate ASW into the DIAL add-on/upgraded system.) The software requires Festival and SOX to operate. I will be releasing copies of ASW (as a tarball) by email until a direct download is available. So after reviewing the Overview and ReadMe1st if you are interested in AutoSkyWarn please send me an email at KF5VH(a)louisiana.edu and please include: - Your Name - Your CallSign - Your Location - a URL pointer to your repeater/group website - any other interesting information ...STeve - KF5VH

1 0

Audio ' Clicking '
by lengriff＠optimum.net 29 Jul '17

29 Jul '17

At ETSNJ, we run 2 repeaters off a Raspberry Pi. After a few days, the audio begins to suffer brief interruptions with a clicking type sound. It progressively gets worse until it is chopping up the actual conversation. I can clear it by re-booting the Pi, but it returns after a time. I've looked at the running processes, and do not see anything abnormal that would chew up processor resources. Anyone have thoughts on what this might be?

2 1

2 nodes on a laptop running DIAL
by N6GKJ Land 28 Jul '17

28 Jul '17

Hi guys, I know this has been asked before and I can't seem recall when... I have 2 DMK URI's on my laptop running DIAL. My problem is that every time I power cycle the laptop, the URI's get readdressed and the node *usbxxxxx.conf files have to be changed to reflect the new buss assignments. How do we get around this? I'm not sure at this point if it is a DIAL issue or a hardware issue with the laptop. I have seen this before on another platform, just can't seem recall what I did to fix it. Changing the platform is not an option in this case, I have a project in process that requires a laptop running DIAL with GUI installed. My system is working great with the exception of the USB assignments Ron, N6GKJ

4 4

SimpleUSB_Tune_Menu
by Luc Drolet VE2 LUQ 27 Jul '17

27 Jul '17

Hello everyone, With an RPi, can you tell me how we can do to adjust the audio with a monitor service, With PuTTY, I can see, "12 - Run simpleusb_tune_Menu Apllication" And then, yes, I saw "2 RX VOICE Level Set" but I do not know how to change my value and also save it Is there a step-by-step procedure for AllStar Link, RX VOICE TX VOICE thank you very much and Have a Nice day Luc 73

4 5

APRS not connecting
by Bob Roszkowski 25 Jul '17

25 Jul '17

I've noticed on a couple of my nodes that APRS was not able to connect. Error in CLI and messages show: WARNING[647] app_gps.c: server second.aprs.net cannot be found!! WARNING[648] app_gps.c: Attempt to send APRS data with no connection open!! I've had this running for quite some time without problems and no changes to config. I can ping second.aprs.net (and rotate.aprs.net) and get a reply. Also changed config to rotate.aprs.net with no change. Anyone else seeing this. It errors out all day long and filling up my logs. Sincerely, boB - W5EVH

2 1

Changed Email Address!
by Loren Tedford 25 Jul '17

25 Jul '17

Greetings Everyone, I enjoy emailing everyone in helping with the installation of allstarlink however I have recently made some changes to the way my email is delivered through the app_rpt user system.. If you have an Emergency and need to personally email me fast. Please use lorentedford(a)gmail.com Now regarding the transition to my new email address which is loren(a)lorentedford.com i will still check this but only 3 times a day.. My gmail is now setup to directly go to my phone! I hope everyone understands why I changed my main email in the app_rpt system.. Again keep up the great work and always enjoy every email i have seen through the list! Please if their is anything i can do to help let me know! Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Email: KC9ZHV(a)KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com

1 0

Kenwood TH-D7 Duplex Node?
by Ramesh Dhami 23 Jul '17

23 Jul '17

Hi All: Wonder if anyone is using a Kenwood TH-D7A (or may be an 'E') for a duplex node? The 'D7 could make for a good node, since it has the ability to operate in full duplex (RX on Band 'A' and TX on Band 'B'). I'd like to know if there is a way to bypass the internal TNC, or to bring out 9600 baud audio (or raw discrim audio) out somehow. I was initially using a pair of Baofeng's for a portable / full-duplex node... but the Baofeng's are as deaf as a potato! Cheers! Ramesh, VA3UV #27919 and a truck load of others....

2 2

Source Code WA3DSP
by Skyler F 23 Jul '17

23 Jul '17

Hmm, maybe if Doug just released what he claims to hate about IRLP .... http://kd0whb.duckdns.org/doug_crompton.wav As far as the last time I requested when I could grab the source code a few weeks ago, I was only responded with " I don't have a time-line on the release". Source http://www.qsotoday.com/podcasts/wa3dsp Time: 36:30

14 19

Looks like I can't post no more on a ARM mailing list.
by Pierre Martel 22 Jul '17

22 Jul '17

Must be because I asked about source a bit too much. Am I the only one that was put under " control " like that? Pierre VE2PF

8 8