- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Xelatec XIPAR IPhone Audio on EchoLink
by pete M 14 Jul '15

14 Jul '15

I have no solution based on what info you provided. How did you set the audio level to your repeater? Did you had only one iphone user or many? some Iphone have the mic level to the max and there audio is really bad.. same for android. And as posted on the list ask the iphone user to use direct connect. > Date: Tue, 14 Jul 2015 19:41:09 -0400 > From: va3ede(a)rogers.com > To: petem001(a)hotmail.com > Subject: Re: [App_rpt-users] Xelatec XIPAR IPhone Audio on EchoLink > > Hi Pete: > > Thanks for the quick response, I have any issues with the Andoid at all. > > Here are my setting for the echolink: > > irxgain=-10 ; IRLP receive gain adjustment > ; Note: Gain is in db-volts (20logVI/VO) > itxgain=10 ; IRLP transmit gain adjustment > ; Note: Gain is in db-volts (20logVI/VO) > erxgain=-3 ; Echolink receive gain adjustment > ; Note: Gain is in db-volts (20logVI/VO) > etxgain=3 ; Echolink transmit gain adjustment > > Any advice. > 73 > Eddie > > On 2015-07-14 19:35, pete M wrote: > > Eddie you must have your level setup bad as I have Iphone Ipad and android echolink user that connect to my node and they are not choppy unless the network is bad > > > > Sent from my iPad > > > >> On Jul 14, 2015, at 7:26 PM, Eddie Pereira VA3EDE <va3ede(a)rogers.com> wrote: > >> > >> Hello Everyone: > >> Has anyone figured out when a user using an IPhone connected through the EchoLink side, The audio always comes out choppy and hard to understand. > >> Does anyone have a solution that they can pass along. > >> > >> Thanks > >> 73 > >> > >> -- > >> Eddie Pereira > >> VA3EDE > >> va3ede(a)rogers.com > >> > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > -- > Eddie Pereira > VA3EDE > va3ede(a)rogers.com >

1 0

Xelatec XIPAR IPhone Audio on EchoLink
by Eddie Pereira VA3EDE 14 Jul '15

14 Jul '15

Hello Everyone: Has anyone figured out when a user using an IPhone connected through the EchoLink side, The audio always comes out choppy and hard to understand. Does anyone have a solution that they can pass along. Thanks 73 -- Eddie Pereira VA3EDE va3ede(a)rogers.com

3 2

xipar simple voter
by Jeff Ackerman 14 Jul '15

14 Jul '15

Is there any way to see the rssi of each voting receiver in the CLI? or some other method? As well as what reciever is selected? -- Jeff Ackerman kg6uyz(a)gmail.com

2 1

usbradio VOX
by Barry 12 Jul '15

12 Jul '15

Hi All extract from the golden book in usbradio.conf carrierfrom=dsp ; Carrier Detect Source ; Options - no,usb,usbinvert,dsp,vox ; no - no carrier detection at all ; usb - via USB radio adapter COR connection ; usbinvert - same as above but inverted polarity. ; dsp - from RX noise using dsp methods ; vox - voice activated via RX audio Question I cannot seem to solve Does the VOX function work. I have been trying it out but the VOX action does not seem to function Its likely I have not configured this correct im sure someone will be kind enough to enlighten me? Barry G8SAU

1 0

Re: [App_rpt-users] courtesy tones
by Barry 11 Jul '15

11 Jul '15

At 23:55 05/07/2015, W2YMM wrote: >I think I was using aÂ Morse K at one time, and I didn't need to create >anything special. That works like it should thanks fantastic something else to add to the master book of secrets of asterisk admin Barry >I believe it looked like : > >rpt.conf >Node Stanza section >unlinkedct=ct12; Send K when not connected to another node > >[telemetry] >ct12=|iKÂ ; K morse code > >I also have some custom courtesy tone examples on ><http://www.w2ymm.com/myallstarlink.html#ctones_bookmark>http://www.w2ymm.com/myallstarlink.html#ctones_bookmark > >Bob W2YMM

1 0

Java 8 problems
by Matt 11 Jul '15

11 Jul '15

> Hello > > I have been using the Allstarlink web interface for a few months now and I love it but recently with the update to Java 8 it stopped working and I realized that I needed to add the site to the exception list but when I do I get this error. Am I do something wrong? Any help would be greatly appreciated. > > "The application was blocked though the host site of the HTML file at:https://www.allstarlink.org/portal/webtransceiver-applet.php?nodenum=408… is included in the Exception Site List because the application refers to resources on multiple domains. The jar file athttps://allstarlink.org/portal/webTransceiver.jaris on a different domain and is not also included on the Exception Site List.” KM4JQH

1 0

zaptel / dahdi
by Barry 06 Jul '15

06 Jul '15

Hi Basics that I dont understand I have used ACID Install for years its just works my first node was 2536 anyway. I have just built with some help instructions i blindly followed and worked ACID used Zaptel ? RasPI 2 install used dahdi whats the difference the config what does dahdi do that zaptel dont? Barry

2 1

Re: [App_rpt-users] courtesy tones
by Barry 05 Jul '15

05 Jul '15

At 18:01 05/07/2015, mike(a)midnighteng.com wrote: >Picked this up some time ago somewhere? >Explains it anyway. > >[telemetry] >ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) >ct2=|t(660,880,150,2048) >ct3=|t(440,0,150,4096) >ct4=|t(550,0,150,2048) >ct5=|t(660,0,150,2048) >ct6=|t(880,0,150,2048) >ct7=|t(660,440,150,2048) >ct8=|t(700,1100,150,2048) Seen that on the ohnosec.org site. BUT I cant find ant listing of as your said what each ct1 through ct8 equals too? I guess I can use the tone1 tone2 duration amplitude to make odd ball tones. what I am trying to create is a Morse character I can see how to do this because I can make tone pairs chained together ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) the above looks to me to make single tones doing doe ray me of something all duration 100ms so to do a K dar dit dar lets say looks like this Not Tested just thinking on the keys. ct1=|t(800,0,500,2048)(800,0,100,2048)(800,0,500,2048) okay sofar but what does ct1 do ?? and the others its not documented on the http://ohnosec.org/drupal/node/96 site Thanks sofar with the tutorials. Barry >;As far as what the numbers mean, >;(0.0.10.0) >; | | | |-------amplitude >; | | |-----------duration >; | |--------------Tone 2 >; |----------------Tone 1

2 1

Re: [App_rpt-users] courtesy tones
by Barry 05 Jul '15

05 Jul '15

At 17:31 05/07/2015, Barry wrote: >Hi > >In rpt.conf > >what controls the courtesy tones or the type of tone? I am sure you can >edit this >to change beep and beep pip to some kind of Morse Character K or B etc. Am reading.. http://ohnosec.org/drupal/node/96 mykey=!t(tone group)[(tone group)][...] just not making complete sense to me at this time.. learning curve its been only 6-years of allstar hi. >Barry > > >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >To unsubscribe from this list please visit >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down >to the bottom of the page. Enter your email address and press the >"Unsubscribe or edit options button" >You do not need a password to unsubscribe, you can do it via email >confirmation. If you have trouble unsubscribing, please send a message to >the list detailing the problem.

2 2

courtesy tones
by Barry 05 Jul '15

05 Jul '15

Hi In rpt.conf what controls the courtesy tones or the type of tone? I am sure you can edit this to change beep and beep pip to some kind of Morse Character K or B etc. Barry

1 0