- App_rpt-users - lists.keekles.org

Startup_macro
by kk6ecm 05 Jul '15

05 Jul '15

WRT http://ohnosec.org/drupal/node/143 I don't understand the *95... I think I get the 3<node number> portion for a connection (where does the "95" originate, or what is its purpose?), and it looks like I can string multiple commands in a line... I'm missing something. Thanks, Bob kk6ecm Sent from iPad

2 2

URIx local audio latency
by Jason Armentrout 05 Jul '15

05 Jul '15

Does anyone else experience audio latency locally with a URIx? After I unkey the repeater I will hear the last syllable of the word I just spoke. I am using a 1.8ghz dual core with 3gig of ram and it is only using 7% of cpu when actively used and only 1/3 of memory being used. Is there anyway to alleviate this problem? Below are CPU specs processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping : 6 cpu MHz : 1864.833 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 3729.66 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping : 6 cpu MHz : 1864.833 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 3729.10

2 1

Re: [App_rpt-users] Newbie, autopatch help
by Jason Armentrout 05 Jul '15

05 Jul '15

Thanks Loren, That was a helpful config along with some help from Mike. Just a tip for anyone looking for free sip calling. I am using gvsip.com You can use your google voice account as a sip account. Pay a one time $5 fee then have unlimited calling. Does anyone have an example config for reverse autopatch? I haven't been able to find one yet. Jason On Sat, Jul 4, 2015 at 3:15 PM, Loren Tedford <lorentedford(a)gmail.com> wrote: > Here is what I did > > http://www.kc9zhv.com/forums/topic/allstar-link-and-auto-patch/ > > Loren Tedford (KC9ZHV) > Email: lorentedford(a)gmail.com > Phone: > http://www.lorentedford.com > http://kc9zhv.com > > Sent from Droid RAZR HD from Verizon wireless network > On Jul 4, 2015 9:46 AM, "Jason Armentrout" <jason(a)atrs.com> wrote: > >> Hi, I'm new to app_rpt (not much of a Linux guru) >> With some help I've managed to get it setup and repeating and connected >> to Allstar. >> >> I'm trying to get Autopatch working and followed instructions at >> http://ohnosec.org/drupal/node/63 >> >> I'm a little confused about the "context" autopatch mentioned as there is >> already a context "radio" defined >> >> It looks like extensions.conf is routing call to pstn out, so I changed >> the routing under pstn-out and commented out what was there. >> [pstn-out] >> exten => _1NXXNXXXXXX,1,Dial,SIP/google/${EXTEN} >> exten => _1NXXNXXXXXX,2,Congestion >> ;exten=_NXXNXXXXXX,1,playback(ss-noservice) >> ;exten=_NXXNXXXXXX,2,Congestion >> >> When I make a call I hear Call connected and immediately it says call >> terminated >> >> I see this in debug >> [Jul 4 07:39:03] WARNING[3986]: pbx.c:2470 __ast_pbx_run: Channel >> 'Zap/pseudo-1 >> 738407999' sent into >> invalid extension '5404342200' in context 'pstn-out', but n >> >> o invalid handler >> I've defined my sip provider in the sip.conf file. >> >> I know it is something simple I'm missing, but I'm not an Asterisk expert >> either and I don't fully understand how all the pieces work. >> I'd also like to setup reverse autopatch as well if someone can provide >> some simple instructions for this. >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >> down to the bottom of the page. Enter your email address and press the >> "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> >

1 0

Newbie, autopatch help
by Jason Armentrout 04 Jul '15

04 Jul '15

Hi, I'm new to app_rpt (not much of a Linux guru) With some help I've managed to get it setup and repeating and connected to Allstar. I'm trying to get Autopatch working and followed instructions at http://ohnosec.org/drupal/node/63 I'm a little confused about the "context" autopatch mentioned as there is already a context "radio" defined It looks like extensions.conf is routing call to pstn out, so I changed the routing under pstn-out and commented out what was there. [pstn-out] exten => _1NXXNXXXXXX,1,Dial,SIP/google/${EXTEN} exten => _1NXXNXXXXXX,2,Congestion ;exten=_NXXNXXXXXX,1,playback(ss-noservice) ;exten=_NXXNXXXXXX,2,Congestion When I make a call I hear Call connected and immediately it says call terminated I see this in debug [Jul 4 07:39:03] WARNING[3986]: pbx.c:2470 __ast_pbx_run: Channel 'Zap/pseudo-1 738407999' sent into invalid extension '5404342200' in context 'pstn-out', but n o invalid handler I've defined my sip provider in the sip.conf file. I know it is something simple I'm missing, but I'm not an Asterisk expert either and I don't fully understand how all the pieces work. I'd also like to setup reverse autopatch as well if someone can provide some simple instructions for this.

3 2

Two nodes one PC
by Robert Newberry 03 Jul '15

03 Jul '15

I just set up two nodes on one PC. I have them both working and connected together. I have a main node that is part of my system that I link all my nodes into. What I did was set a startup macro for one of the nodes to connect to my main node and the second node on the same PC has a startup node to connect to the other node on the same PC. Is that how other people do it? Or does it really matter how I skin the cat if the job is getting done? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812

1 0

Re: [App_rpt-users] How to Hardwire Two Nodes in One APP_RPT Server
by Doug Crompton 03 Jul '15

03 Jul '15

If they are on the same server they should know about each other and you should be able to connect directly internally. Is that not working? 73 Doug WA3DSP http://www.crompton.com/hamradio Subject: Re: [App_rpt-users] How to Hardwire Two Nodes in One APP_RPT Server From: kk6ecm(a)gmail.com Date: Fri, 3 Jul 2015 11:26:00 -0700 To: doug(a)crompton.com Let me re ask my question. Single server with two nodes, no internet; how do I setup app_rpt so the two nodes are always linked (" hard wired", if you will). What is the difference in the *.conf setup for a permanent link between the nodes? I know how to set up the nodes for each radio, just not clear how to link them via the *.conf file setups (e.g. rpt.conf, iax.conf, extensions.conf). Thanks,Bobkk6ecm Sent from iPad On Jul 3, 2015, at 10:47 AM, Doug Crompton <doug(a)crompton.com> wrote: If it is RF connect via radio and it is is wired connect via that. Both will work equally well if the routing is setup properly. No need to have Internet access. 73 Doug WA3DSP http://www.crompton.com/hamradio Subject: Re: [App_rpt-users] How to Hardwire Two Nodes in One APP_RPT Server From: kk6ecm(a)gmail.com Date: Fri, 3 Jul 2015 07:46:21 -0700 CC: app_rpt-users(a)ohnosec.org To: doug(a)crompton.com Two servers connected via an rf link between one node on each server. One server is remote, supporting the rf link and a repeater (no internet), and the second is a normal Allster server with two registered nodes, one connected to a repeater, and the second connected to the radio support its half of the rf link with the other server. Thanks,Bobkk6ecm Sent from iPad On Jul 3, 2015, at 6:18 AM, Doug Crompton <doug(a)crompton.com> wrote: I am assuming these are two separate servers. If so they just have to be on a LAN connected together and the routing has to be setup at each server. They do not have to be registered. In this way they operate as private nodes. Of course anything that needs the Internet will not work. Here is info on doing the routing. It applies equally to any Allstar node - Acid, BBB, RPi2, etc. http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/multi-server%20howt… 73 Doug WA3DSP http://www.crompton.com/hamradio > From: kk6ecm(a)gmail.com > To: app_rpt-users(a)ohnosec.org > Date: Thu, 2 Jul 2015 22:28:17 -0700 > Subject: [App_rpt-users] How to Hardwire Two Nodes in One APP_RPT Server > > I'm looking for information on how to "hardwire" link two nodes together in > my server. One node is full-duplex repeater and the other is a half-duplex > RF link to a second repeater that has full Allstar control on both the > repeater and the link. They are located at a remote site, with no internet > connection after install. I'm sure there are other things I'm missing, but > this will enable me to experiment with final configuration combinations. > > Thanks, > Bob > kk6ecm > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >

1 0

How to Hardwire Two Nodes in One APP_RPT Server
by kk6ecm 03 Jul '15

03 Jul '15

I'm looking for information on how to "hardwire" link two nodes together in my server. One node is full-duplex repeater and the other is a half-duplex RF link to a second repeater that has full Allstar control on both the repeater and the link. They are located at a remote site, with no internet connection after install. I'm sure there are other things I'm missing, but this will enable me to experiment with final configuration combinations. Thanks, Bob kk6ecm

2 3

Is it possible to have two Echolinks on the same server?
by Loren Tedford 03 Jul '15

03 Jul '15

Hi I am trying to figure out how to run two Echolinks on the Same Server can it be done?? If so what does the config look like? Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Phone: http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

2 2

Web transceiver Certificate Expired
by Tim Sawyer 02 Jul '15

02 Jul '15

The Java certificate for the Webtranceiver has expired and will not be renewed. But you can add an exception to your Java security settings in the control panel or system preferences. FYI, if anybody wants to step up and sign the Jar file please let me know. -- Tim

1 0

Autopatch settings
by Mark Johnston 02 Jul '15

02 Jul '15

Does anyone know a way to do either of these? With a simplex node i.e. Duplex set to 0/1 in rpt.conf the Autopatch operates in vox mode, is there a way to force this in Duplex =3 without rewriting the source code? or Is there a way to set a time out timer on the phone side, as it transmits 100% of the time during the call, I would like to have it drop after 9 mins, if the user keys up, it would reset/continue or at least drop and come back up in some fashion... some cop or other command to unkey the tx briefly - my transmitter has a built in 10min TOT - wanted a way to reset it on the autopatch calls.

1 0