- App_rpt-users - lists.keekles.org

ALIX 3d3
by Tony Langdon 23 Jun '13

23 Jun '13

I have an Alix 3d3 board which is currently gathering dust. I'm looking at rebuilding my systems over the several months. Talking to a few people, I am led to believe that this board will run AllStar. Choice of OS isn't an issue, I'm happy to reinstall from scratch, though the installation medium could be an issue (I don't have a USB CD/DVD drive). The exact configuration isn't determined yet, likely to be either simpleusb or chan_tlb (or both!). Can I use this board for AllStar? -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

1 0

Bogus SIP registrations
by KB0KZR 23 Jun '13

23 Jun '13

All-- While diagnosing another problem (which I will post about in a little bit if I can't get it figured out, but I wanted to keep separate threads separate) -- suddenly somebody started sending me a ton of bogus SIP registrations. The source-IP is 210.73.202.76 for whatever that may be worth. I thought about firewalling it, but I don't think SIP is required at all for app_rpt to work? So I disabled chan_sip entirely in modules.conf. Just throwing it out there as something to consider for other app_rpt nodes... I don't know of any security flaws in chan_sip, but I figured since it isn't being used there's no reason to run it. -Matt-

2 2

RTCM Audio
by Fran 23 Jun '13

23 Jun '13

Hello, I have a repeater with an allstar server and 2 remote RTCM nodes connected, the audio back to the repater is fine however the audio back out to each RTCM Node is a bit low, is there an adjustment in each RTCM that needs adjustment???? Frank

2 1

Re: [App_rpt-users] Re : Bogus SIP registrations
by Dwaine Garden VE3GIF 23 Jun '13

23 Jun '13

I had the Chinese hackers dial 911 multiple times. pete M <petem001(a)hotmail.com> wrote: >China hacker or china gov tha try to connect to you.. thats where the ip is located.. > >--- Message initial --- > >De : "KB0KZR" <kb0kzr(a)matthouse.com> >Envoyé : 23 juin 2013 16:03 >A : app_rpt-users(a)ohnosec.org >Objet : [App_rpt-users] Bogus SIP registrations > >All-- > >While diagnosing another problem (which I will post about in a little bit >if I can't get it figured out, but I wanted to keep separate threads >separate) -- suddenly somebody started sending me a ton of bogus SIP >registrations. The source-IP is 210.73.202.76 for whatever that may be >worth. I thought about firewalling it, but I don't think SIP is required >at all for app_rpt to work? So I disabled chan_sip entirely in >modules.conf. > >Just throwing it out there as something to consider for other app_rpt >nodes... I don't know of any security flaws in chan_sip, but I figured >since it isn't being used there's no reason to run it. > >-Matt- > >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re : Bogus SIP registrations
by pete M 23 Jun '13

23 Jun '13

China hacker or china gov tha try to connect to you.. thats where the ip is located.. --- Message initial --- De : "KB0KZR" <kb0kzr(a)matthouse.com> Envoyé : 23 juin 2013 16:03 A : app_rpt-users(a)ohnosec.org Objet : [App_rpt-users] Bogus SIP registrations All-- While diagnosing another problem (which I will post about in a little bit if I can't get it figured out, but I wanted to keep separate threads separate) -- suddenly somebody started sending me a ton of bogus SIP registrations. The source-IP is 210.73.202.76 for whatever that may be worth. I thought about firewalling it, but I don't think SIP is required at all for app_rpt to work? So I disabled chan_sip entirely in modules.conf. Just throwing it out there as something to consider for other app_rpt nodes... I don't know of any security flaws in chan_sip, but I figured since it isn't being used there's no reason to run it. -Matt- _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

BBB
by Robert Garcia 23 Jun '13

23 Jun '13

All, I have searched the archives and understand that the issue with the ARM platforms is that they don't have enough "juice" to do the DSP processing. Has anybody made any progress in compiling them for use with the simpleusb interface type? If so, please let me know. Thanks! Robert N5QM

1 0

Re: [App_rpt-users] G707 Remote Base Locking Up on URI
by K&R Yoksh 22 Jun '13

22 Jun '13

Hello Monty, While not specific to the remote operation, I see one thing that might make app_rpt lose it's mind. The rxchannel parameter is very picky about syntax, especially the upper and lower case letters. The correct format is: rxchannel=SimpleUSB/usb1010 Another thing I've learned is to never (NEVER) have usbradio.conf and simpleusb.conf exist in /etc/asterisk at the same time. This will confuse app_rpt at the least, or crash it altogether. 73, Kyle Yoksh K0KN Olathe, KS Allstar 2210-2219 --- Original Message ---Hello Everyone, I have tried two Kenwood G707s with three of Jim's URI Adapter cards and two URIs on two different computers. I am able to get three or four commands (freq, pl tone, etc) then I will get Allison saying "Invalid Frequency" and the CLI shows: "WARNING[7925]: app_rpt.c:13876 serial_remote_io: -99999 Serial device not responding on node 1010" The radio will not steer or accept commands anymore until I power cycle the 707. The after power cycle three or four commands and will not steer again. I have tried the same computer with a VHF Syntor with an xcat and will accept every command without issue. Also one of my 707s now lives on a Quad PCI card and steers with every command without issue. Has anyone else seen this or know the remedy? Below is my rpt.conf with the URI: [1010] archivedir=/etc/asterisk/qso rxchannel = simpleusb/usb1010 duplex=0 ioport = /dev/ttyS0 remote = kenwood authlevel = 1 memory=memory remote_inact_timeout=5400 remote_timeout=5400 functions=remote-functions phone_functions=remote-functions link_functions=remote-functions

6 8

rpt.conf - Remote base/two nodes
by George Csahanin 22 Jun '13

22 Jun '13

I don't think I dreamt this, but cannot find anything on it, and the PC that was running app_rpt crawled up and died...but I remember a dual node config allowing separate telemetry, commands, etc for each node number in the rpt.conf file. I just have gone thru the SVN nooks and crannies, gone back over revisions in app_rpt back to 2009, and see no reference to it. Am I imagining this, if not can someone either point me to a sample file? I wanted to get my remote base back on. George W2DB 2360

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 52, Issue 28
by j88az＠vincysurf.com 22 Jun '13

22 Jun '13

Vince, yes it will work. That's exactly what my current situation is. My PC died and I stick my hard drive onto a USB to IDE adapter and running from an HP Thin Client. Winston - J88AZ Sent from my BlackBerry® device from Digicel -----Original Message----- From: app_rpt-users-request(a)ohnosec.org Sender: app_rpt-users-bounces(a)ohnosec.org Date: Sat, 22 Jun 2013 12:00:02 To: <app_rpt-users(a)ohnosec.org> Reply-To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 52, Issue 28 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

1 0

Compilation Guide
by Robert Garcia 22 Jun '13

22 Jun '13

All, Is there a guide or document that outlines what is required to compile app_rpt manually? Specifically when not using ACID, Limey or Pickle. Robert N5QM

1 0