- App_rpt-users - lists.keekles.org

Cant connect one more time!
by Jim W7RY 17 Oct '12

17 Oct '12

Why cant I connect? I’m about ready to just shut it off... I don’t need the headache! Jim W7RY w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 76.9.248.101:4569 60 Registered w7ry*CLI> rpt fun 28238 *32560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-643' -- Hungup 'Zap/pseudo-1681955686' -- Hungup 'Zap/pseudo-740754801' -- <Zap/pseudo-662374073> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/2' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/5' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/6' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/0' (language 'en') -- <Zap/pseudo-662374073> Playing 'rpt/connection_failed' (language 'en') -- Hungup 'Zap/pseudo-662374073' w7ry*CLI> w7ry*CLI> iax2 show registry

1 1

Re: [App_rpt-users] Alternate IAX port >> Registered ok but not listed?
by Kevin Oleniczak 15 Oct '12

15 Oct '12

I finally got this working. To close this out, here's what i found. It turns out the issue was that i had binaddr listed above bindport in iax.conf. In order for bindport to get used, it has to appear in the file before bindaddr. thanks to all who helped with this. On Tue, Oct 9, 2012 at 8:40 PM, Tim Sawyer <tim.sawyer(a)mac.com> wrote: > Try changing your IP address setting on the Portal to either DHCP or > Fixed. I don't know what the VoIP setting you currently have it set for > does. > -- > Tim > :wq > > On Oct 9, 2012, at 5:29 PM, Kevin Oleniczak <kevinoleniczak(a)gmail.com> > wrote: > > I had already done that in the portal but it still wasn't working. As an > experiment, i changed everything back to the original 4569 port and > forwarded that on my router. I could then connect with the webtransceiver. > However i can't leave it there and need to get it to work on an alternate > port. It seems from my testing that something is hard set to port 4569 on > the allstar end of things? > > ideas? > > thank you > > On Tue, Oct 9, 2012 at 3:47 AM, Ken <ke2n(a)cs.com> wrote: > >> Yes – you need to log onto the portal and get to the server configuration >> tab – there is a place there to change to port number that the registration >> server is talking to.**** >> >> ** ** >> >> ** ** >> >> Ken**** >> >> ** ** >> >> ** ** >> >> *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: >> app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Kevin Oleniczak >> *Sent:* Tuesday, October 09, 2012 12:09 AM >> *To:* app_rpt-users(a)ohnosec.org >> *Subject:* [App_rpt-users] Alternate IAX port >> Registered ok but not >> listed?**** >> >> ** ** >> >> I am unable to connect to my node from the webtransceiver and don't see >> it listed on the active nodes page. I use an alternate iax port because i >> have to. **** >> >> From reading other posts… it seems I may need an admin to change my iax >> port from 4569 to what I now want to use which is 4570? thoughts?**** >> >> **** >> >> My registration is still showing 4569 and am forwarding 4570 on my router >> to my ACID box.**** >> >> **** >> >> cruiser*CLI> iax2 show registry**** >> >> Host dnsmgr Username Perceived Refresh >> State**** >> >> <myip>:4569 N 28970 <myip>:4569 60 Registered**** >> >> **** >> >> I’m not seeing my node show up and believe this is the cause. In my >> iax.conf I have bindport set 4570 and also in server config under network I >> set port 4570 on the portal.**** >> >> **** >> >> looking at rpt_extnodes i see my node listed with the correct port...**** >> >> ** ** >> >> 28970=radio@<myip>:4570/28970,<myip>**** >> >> ** ** >> >> ** ** >> >> [general]**** >> >> bindaddr=0.0.0.0**** >> >> bindport=4570**** >> >> ....**** >> >> **** >> >> register=28970:<mypasswd>@register.allstarlink.org**** >> >> **** >> >> ** ** >> > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > >

6 6

+++ RTCM and digital Transceiver +++
by kbaumann 14 Oct '12

14 Oct '12

Hi, Because my first RTCM works perfect with our local Fm Repeater i would like to connect a Motorola Tetra mobile with the second RTCM. The problem is: there is no COR Signal and also there is no discriminator noise (only ready to go audio) to adjust the Squelch. Is there a solution to bring them together? The SQL is not adjustable - JP1 ON or OFF gives no solution. Thank you Kurt OE1KBC

1 0

Re: [App_rpt-users] Ok, what memo did I miss
by Alan Adamson 12 Oct '12

12 Oct '12

Further, I show up on the *blue screen list* as everything ok, but I show ad not registered on the public status screen (no green box, but very large numbers and not registered since showing). and worse, I can't connect to any other nodes. Ok, who broke it. I promise I didn't change anything since July or there abouts. Alan From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Alan Adamson Sent: Friday, October 12, 2012 2:57 PM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] Ok, what memo did I miss I've not changed any one thing on my server in months and yet today I went to see what my status was shown as I was going some testing and *NONE* of my nodes are shown as active (green box highlight) on the allstar status page. Ok, what do I have to change? Alan

4 4

Ok, what memo did I miss
by Alan Adamson 12 Oct '12

12 Oct '12

I've not changed any one thing on my server in months and yet today I went to see what my status was shown as I was going some testing and *NONE* of my nodes are shown as active (green box highlight) on the allstar status page. Ok, what do I have to change? Alan

1 0

app_gps aprs server settings
by Heikki Hannikainen 12 Oct '12

12 Oct '12

Hi everyone, I'm Hessu, OH7LZB. I run the aprs.fi web service. If you're currently using app_gps and reporting to APRS with it, please read this: app_gps default server configuration in app_gps.c, and on the documentation web page at http://ohnosec.org/drupal/node/179, points only to a single APRS-IS server (second.aprs.net) That server is currently full most of the day (300 users) and does not accept new clients. Due to outages on other servers it has been full for several weeks, leaving some users out, probably including some app_gps users who are only trying to connect second.aprs.net. Please update your gps.conf to say either: server = rotate.aprs2.net port = 14580 or server = rotate.aprs.net port = 14580 rotate.aprs.net points to all 9 APRS-IS core servers (2 of those down currently), and using that will get you automatically connected to one of those (not just the second in row which is currently full). If you choose to use rotate.aprs2.net, you will end up on one of over 80 Tier2 servers which have a Dynamic DNS setup (rotate.aprs2.net always points to a smaller subset of servers which have been tested and verified to be available and not full right now). This way you'll get connected even if second.aprs.net would happen to be full or down (and it wouldn't be full if everyone used the rotate addresses, anyway). I've submitted a little bug ticket with a little patch in mantis to change the defaults and examples: http://ohnosec.org/mantis/view.php?id=80 Thank you! - Hessu

1 0

All Star VoIP service
by Michael Hebert 12 Oct '12

12 Oct '12

Can someone please point in the direction to find the All Star VoIP monthly service? Thanks, Mike KD5DFB

2 1

Re: [App_rpt-users] Alternate IAX port >> Registered ok but not listed?
by Kevin Oleniczak 11 Oct '12

11 Oct '12

I had already done that in the portal but it still wasn't working. As an experiment, i changed everything back to the original 4569 port and forwarded that on my router. I could then connect with the webtransceiver. However i can't leave it there and need to get it to work on an alternate port. It seems from my testing that something is hard set to port 4569 on the allstar end of things? ideas? thank you On Tue, Oct 9, 2012 at 3:47 AM, Ken <ke2n(a)cs.com> wrote: > Yes – you need to log onto the portal and get to the server configuration > tab – there is a place there to change to port number that the registration > server is talking to.**** > > ** ** > > ** ** > > Ken**** > > ** ** > > ** ** > > *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: > app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Kevin Oleniczak > *Sent:* Tuesday, October 09, 2012 12:09 AM > *To:* app_rpt-users(a)ohnosec.org > *Subject:* [App_rpt-users] Alternate IAX port >> Registered ok but not > listed?**** > > ** ** > > I am unable to connect to my node from the webtransceiver and don't see it > listed on the active nodes page. I use an alternate iax port because i have > to. **** > > From reading other posts… it seems I may need an admin to change my iax > port from 4569 to what I now want to use which is 4570? thoughts?**** > > **** > > My registration is still showing 4569 and am forwarding 4570 on my router > to my ACID box.**** > > **** > > cruiser*CLI> iax2 show registry**** > > Host dnsmgr Username Perceived Refresh > State**** > > <myip>:4569 N 28970 <myip>:4569 60 Registered**** > > **** > > I’m not seeing my node show up and believe this is the cause. In my > iax.conf I have bindport set 4570 and also in server config under network I > set port 4570 on the portal.**** > > **** > > looking at rpt_extnodes i see my node listed with the correct port...**** > > ** ** > > 28970=radio@<myip>:4570/28970,<myip>**** > > ** ** > > ** ** > > [general]**** > > bindaddr=0.0.0.0**** > > bindport=4570**** > > ....**** > > **** > > register=28970:<mypasswd>@register.allstarlink.org**** > > **** > > ** ** >

4 3

limeylinux help please anyone?
by Matt Beasant 11 Oct '12

11 Oct '12

I have an Intel Atom based embedded machine that uses a CF card for its storage. I've written the image OK to the CF card and can see all the files on the card. However, when the machine boots, it gets part way through the sequence and hangs - the only way to revive the thing is to power reset it. Is there anyone on the list who is familiar with Limey and could give me some pointers as to how I can find out what the problem is? The machine has 1Gb of system ram. Thanks in advance for any help received, Cheers! Matt G4RKY On 31 August 2012 19:49, Jim Duuuude <telesistant(a)hotmail.com> wrote: > The Limeylinux.org site has now been un-borked. > > A good thing, except no more Sweedish Chef (Bork! Bork! Bork!). > > Jim > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

2 2

Remote Acknowledgement
by Matt Roberts 11 Oct '12

11 Oct '12

I'd like to have my remote base send "OK" in CW when you issue a command and it is valid. How do I change this? Matt Roberts n9gmr(a)me.com Call Sign N9GMR Allstar 28142 EchoLink 640860

1 0