- App_rpt-users - lists.keekles.org

Same Old Problem With Node
by Jim W7RY 13 Sep '12

13 Sep '12

Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI>

3 8

Autopatch (inbound) question...
by Bryan D. Boyle 12 Sep '12

12 Sep '12

OK...on another topic...working on getting the autopatch working (yeah, why? Why not...figure dialing in gives me one more way of controlling the machine if not available via RF or I don't have my laptop up to come in thru the web transceiver...) I'm using Google Voice via Simonics.com to handle the SIP registration and such. My box registers fine with the provider...evidenced by the fact that I can dial out...:) However, dialing in from a landline, I get: NOTICE[18486]: chan_sip.c:14418 handle_request_invite: Call from 'GV1609XXXXXXX' to extension '1609XXXXXXX' rejected because extension not found. OK, I'm assuming I need to put an extension for SIP to get routed to. That extension would be inbound, thru, perhaps, a password (or, like when you call Jim, a voice response to type in a code before it rings his line...:)) to connect to the radio control. Thoughts? Insights? -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

1 0

additionally
by Bryan D. Boyle 11 Sep '12

11 Sep '12

iax.conf file shows the right password, and so forth for all my nodes...however, when I do an iax2 show registry in rasterisk...I get a request sent, but an <unregistered> comment in the Perceived column, and a request sent indication in the state. Jim? (for node 28254...) Thanks. -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

1 1

not registered on allstarlink?
by Bryan D. Boyle 11 Sep '12

11 Sep '12

hmmmm... reload my rpt.conf file...which hasn't changed a bit...gives me: -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting but, in the web transceiver page, for those nodes which I have enabled the transceiver...doesn't show up in the list of active nodes... Hmmm....thoughts? -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

1 0

Re: [App_rpt-users] Aprs beacon rate
by ki6ies.tasma＠gmail.com 10 Sep '12

10 Sep '12

Thank you. That worked. I Wonder why the web gui for allstarlink doesn't include that, when you do a download config. But then again it doesn't include alot of things. Ian Ki6ies Sent from my Verizon Wireless 4G LTE DROID Scott Weis <kb2ear(a)kb2ear.net> wrote: >In gps.conf add > > > >interval=600 ; beacon every 10 mins > > > > > >From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of ki6ies.tasma(a)gmail.com >Sent: Monday, September 10, 2012 1:46 PM >To: app_rpt-users(a)ohnosec.org >Subject: [App_rpt-users] Aprs beacon rate > > > >Where can i modify the beacon rate? I couldn't find it in gps.conf. I noticed on aprs.fi my station is beaconing at a rate of 105 times an hour for a fixed station, no gps attached. Thanks. > > > >Ian > >Ki6ies > > > >Sent from my Verizon Wireless 4G LTE DROID >

1 0

Aprs beacon rate
by ki6ies.tasma＠gmail.com 10 Sep '12

10 Sep '12

Where can i modify the beacon rate? I couldn't find it in gps.conf. I noticed on aprs.fi my station is beaconing at a rate of 105 times an hour for a fixed station, no gps attached. Thanks. Ian Ki6ies Sent from my Verizon Wireless 4G LTE DROID

2 1

Megan
by Edward talaro Talaro 09 Sep '12

09 Sep '12

On the CLI screen i notice 3 days ago i seen this "Megan" SIP is this normal. Is this Megans Law ? Thanks NH6WT Ed

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 43, Issue 15
by Keith 08 Sep '12

08 Sep '12

Disconnection update I would like if possible for the node to say "Disconnecting from node XXXX, Or simple you are now disconnected". I normally send *51 to disconnect and I hear "beep beep" Also on time outs from a the Win system it just goes silent on disconnection so when time out kicks in it would be appreciated to have "Time Out " and at least I would know to re-connect Many thanks if a Asterisk bod can help Regards Keith -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: 08 September 2012 17:00 To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 43, Issue 15 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: pickle problem after upgrade (George Csahanin) 2. Re: Slow green led flashing on uri? (Anthony Percy) 3. Re: Slow green led flashing on uri? (Ken) 4. Remote help (Keith) 5. Re: Remote help (Jeffrey S. Carrier) ---------------------------------------------------------------------- Message: 1 Date: Fri, 7 Sep 2012 12:08:31 -0400 From: "George Csahanin" <george(a)dyb.com> To: "George Csahanin" <george(a)dyb.com>, <app_rpt-users(a)ohnosec.org> Subject: Re: [App_rpt-users] pickle problem after upgrade Message-ID: <983158B7D9BD46078E7CF330B933AE02@Goofy12> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Upgraded pickle last night, got this message repeating then asterisk dies off, went back to old sources, same thing. My brain is way too foggy with family issues here, can someone point to what I may have wrong, I just can't think too clearly. GeorgeC W2DB 2360 Connected to Asterisk currently running on nat (pid = 29110) [Sep 7 12:25:08] NOTICE[29115]: app_radbridge.c:599 radbridge_master: RPT thread restarted on instance1 [Sep 7 12:25:08] WARNING[29115]: app_radbridge.c:610 radbridge_master: radbridge_thread restarted on node instance1 [Sep 7 12:25:08] NOTICE[29115]: app_radbridge.c:599 radbridge_master: RPT thread restarted on instance2 [Sep 7 12:25:08] WARNING[29115]: app_radbridge.c:610 radbridge_master: radbridge_thread restarted on node instance2 [Sep 7 12:25:08] WARNING[29163]: channel.c:3051 ast_request: No channel type registered for 'Voter' [Sep 7 12:25:08] ERROR[29163]: app_radbridge.c:289 radbridge: radbridge:Sorry unable to obtain channel [Sep 7 12:25:08] WARNING[29164]: channel.c:3051 ast_request: No channel type registered for 'Voter' [Sep 7 12:25:08] ERROR[29164]: app_radbridge.c:289 radbridge: radbridge:Sorry unable to obtain channel [Sep 7 12:25:10] NOTICE[29115]: app_radbridge.c:599 radbridge_master: RPT thread restarted on instance1 [Sep 7 12:25:10] WARNING[29115]: app_radbridge.c:610 radbridge_master: radbridge_thread restarted on node instance1 I figured it out, I recompiled just from the asterisk directory, not from astsrc...all seems fine now GeorgeC ------------------------------ Message: 2 Date: Sat, 8 Sep 2012 21:36:51 +1000 From: Anthony Percy <anthcp(a)gmail.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: Re: [App_rpt-users] Slow green led flashing on uri? Message-ID: <CA+rLymFntc7ZVMXG24iUJSTJ_4gEECOtb1iNNZpqensgWi5P=Q(a)mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Hi all, The plot thickens.... I need to explain what I mean by the flashing green LED on the C-Media based URI... Normally when it is connected to our main repeater allstar PC and working, it flashes at about once a second... However on the new ASUS mobo Allstar ACID build it only flashes about once every 2-3 seconds once asterisk has started... As you have guessed it does not pass repeater audio in this state. But it did once when it was unplugged and then plugged in, it flashed at once a second and the repeater audio worked on the new ASUS mobo. Has anyone had a similar experience??? Its looking more like to me that it is a problem with the latest ACID install and the new ASUS i3 motherboard we are using.... Whats strange is there are no errors in the message logs ( system and asterisk) or when you debug rpt in the asterisk console... The other symptom is sometimes when you plug or unplug the URI in, it hangs the PC!!! Could some explain why the URI flashes at once a second when it is operational and under what condition it would flash slower??? Regards Anthony VK2ACP On Mon, Sep 3, 2012 at 1:04 PM, Anthony Percy <anthcp(a)gmail.com> wrote: > Hi all, > Tried to make a backup of an allstar server onto a new i3 Asus mobo. > Loaded acid install and works apart from onboard netcard which was fixed by a new driver. > However with the backup config files loaded all we get is hum when we plugged on the repeater uri. We thought it was a ground loop problem untill after a reboot it all worked, audio on the repeater was fine!!! On reboot we were back to hum... Someone then noticed the uri green led was flashing slower than when it was working ok...any ideas???? > > Regards > > VK2ACP ------------------------------ Message: 3 Date: Sat, 8 Sep 2012 09:52:17 -0400 From: "Ken" <ke2n(a)cs.com> To: "'Anthony Percy'" <anthcp(a)gmail.com>, <app_rpt-users(a)ohnosec.org> Subject: Re: [App_rpt-users] Slow green led flashing on uri? Message-ID: <003501cd8dc9$292b7830$7b826890$(a)cs.com> Content-Type: text/plain; charset="us-ascii" My understanding is that the USB protocol requires 3 (re)tries on error. If you get the "slow blink" your USB comms are not working. Or they are working and returning all garbage. Ken PS: On my 3 systems the basic blink rate is faster than 1/second - more like 3-4/second > -----Original Message----- > From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users- > bounces(a)ohnosec.org] On Behalf Of Anthony Percy > Sent: Saturday, September 08, 2012 7:37 AM > To: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] Slow green led flashing on uri? > > Hi all, > The plot thickens.... I need to explain what I mean by the flashing > green LED > on the C-Media based URI... Normally when it is connected to our main > repeater allstar PC and working, it flashes at about once a second... However > on the new ASUS mobo Allstar ACID build it only flashes about once > every 2-3 > seconds once asterisk has started... As you have guessed it does not > pass repeater audio in this state. But it did once when it was > unplugged and then > plugged in, it flashed at once a second and the repeater audio worked > on the > new ASUS mobo. > > Has anyone had a similar experience??? > Its looking more like to me that it is a problem with the latest ACID install and > the new ASUS i3 motherboard we are using.... > Whats strange is there are no errors in the message logs ( system and > asterisk) or when you debug rpt in the asterisk console... > The other symptom is sometimes when you plug or unplug the URI in, it > hangs the PC!!! > > Could some explain why the URI flashes at once a second when it is > operational and under what condition it would flash slower??? > > Regards > > Anthony VK2ACP > > > > > On Mon, Sep 3, 2012 at 1:04 PM, Anthony Percy <anthcp(a)gmail.com> wrote: > > Hi all, > > Tried to make a backup of an allstar server onto a new i3 Asus mobo. > > Loaded acid install and works apart from onboard netcard which was > > fixed > by a new driver. > > However with the backup config files loaded all we get is hum when > > we > plugged on the repeater uri. We thought it was a ground loop problem untill > after a reboot it all worked, audio on the repeater was fine!!! On > reboot we > were back to hum... Someone then noticed the uri green led was > flashing slower than when it was working ok...any ideas???? > > > > Regards > > > > VK2ACP > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ------------------------------ Message: 4 Date: Sat, 8 Sep 2012 15:52:25 +0100 From: "Keith" <keith(a)handscombe.co.uk> To: <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Remote help Message-ID: <001301cd8dd1$8f7c1f10$ae745d30$(a)co.uk> Content-Type: text/plain; charset="us-ascii" Hi All, I would like some Asterisk help adding the time on the hour and a disconnection announcement if possible. After having a read and getting advice from 2 Asterisk users I had a play and the node came to a halt all my own fault as I was in babysitting mode and I still so not understand some of the details. I have a ghost image and all back in less than a hour from bootable DVD so all working once more. If anyone has advice or can connect and help I would appreciate please Many thanks Keith NODE: 2498 ------------------------------ Message: 5 Date: Sat, 08 Sep 2012 09:15:27 -0600 From: "Jeffrey S. Carrier" <jeff.carrier(a)rmsmsecurity.com> To: <app_rpt-users(a)ohnosec.org>, <keith(a)handscombe.co.uk> Subject: Re: [App_rpt-users] Remote help Message-ID: <001a01cd8dd4$c8836c25$1e00000a(a)plantprotection.ad> Content-Type: text/plain; charset="utf-8" Keith, The time is fairly easy, what kind of disconnect announcement are you looking for. Can you explain that part? K0jsc Jeffrey S. Carrier Fire Inspector, Plant Protection (719) 561-7199 direct (719) 561-6567 fax 1612 E. Abriendo Ave. Pueblo, Colorado 81004 jeffrey.carrier(a)evrazincna.com Sent from my Android phone using TouchDown -----Original Message----- From: Keith [keith(a)handscombe.co.uk] Received: Saturday, 08 Sep 2012, 8:52am To: app_rpt-users(a)ohnosec.org [app_rpt-users(a)ohnosec.org] Subject: [App_rpt-users] Remote help Hi All, I would like some Asterisk help adding the time on the hour and a disconnection announcement if possible. After having a read and getting advice from 2 Asterisk users I had a play and the node came to a halt all my own fault as I was in babysitting mode and I still so not understand some of the details. I have a ghost image and all back in less than a hour from bootable DVD so all working once more. If anyone has advice or can connect and help I would appreciate please Many thanks Keith NODE: 2498 _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users End of App_rpt-users Digest, Vol 43, Issue 15 *********************************************

1 0

Re: [App_rpt-users] Remote help
by Jeffrey S. Carrier 08 Sep '12

08 Sep '12

Keith, The time is fairly easy, what kind of disconnect announcement are you looking for. Can you explain that part? K0jsc Jeffrey S. Carrier Fire Inspector, Plant Protection (719) 561-7199 direct (719) 561-6567 fax 1612 E. Abriendo Ave. Pueblo, Colorado 81004 jeffrey.carrier(a)evrazincna.com Sent from my Android phone using TouchDown -----Original Message----- From: Keith [keith(a)handscombe.co.uk] Received: Saturday, 08 Sep 2012, 8:52am To: app_rpt-users(a)ohnosec.org [app_rpt-users(a)ohnosec.org] Subject: [App_rpt-users] Remote help Hi All, I would like some Asterisk help adding the time on the hour and a disconnection announcement if possible. After having a read and getting advice from 2 Asterisk users I had a play and the node came to a halt all my own fault as I was in babysitting mode and I still so not understand some of the details. I have a ghost image and all back in less than a hour from bootable DVD so all working once more. If anyone has advice or can connect and help I would appreciate please Many thanks Keith NODE: 2498 _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Remote help
by Keith 08 Sep '12

08 Sep '12

Hi All, I would like some Asterisk help adding the time on the hour and a disconnection announcement if possible. After having a read and getting advice from 2 Asterisk users I had a play and the node came to a halt all my own fault as I was in babysitting mode and I still so not understand some of the details. I have a ghost image and all back in less than a hour from bootable DVD so all working once more. If anyone has advice or can connect and help I would appreciate please Many thanks Keith NODE: 2498

1 0