October 2012 - App_rpt-users - lists.keekles.org

Fwd: CT weirdness
by Matt Beasant 27 Oct '12

27 Oct '12

Hi Matt, Yes, thats exactly what I have done but it's not making any difference! Weird! On 27 October 2012 14:07, Matt Roberts <n9gmr(a)me.com> wrote: > > On Oct 27, 2012, at 8:18 AM, Matt Beasant wrote: > > > I am having a lot of strange things happen with my CTs on my node. > > > > I have 3 nodes defined on this computer. Each has an entry in rpt.conf > but regardless of what I put in the telemetry stanza I cannot change the > CTs! > > > > I have renamed the telemetry sections in the node definition section of > the rpt.conf file with suitable names and used the same name in the title > of the telemetry section i.e. "telemetry=telemetryNODE1". > > > > Each node has its own name for the telemetry section. > > > You define the CTs in the stanza for each individual node. > > > Matt Roberts > n9gmr(a)me.com > Call Sign N9GMR > Allstar 28142 > EchoLink 640860 > >

2 2

Using SVN copy of Asterisk on RaspberryPi (and "usb.h")
by Shane Morris 27 Oct '12

27 Oct '12

Hello all, I am using Raspbian on the RaspberryPi, which is a "wheezy" image, upgraded to the latest kernels, using an aptitude copy of dahdi. I SVN checked out 1.4.23-pre of Asterisk as per the link on the Drupal site, and have been mulling over the various issues as they popped up during compilation. Where I've hit a brick wall is the "usb.h" file needed by chan_simpleusb.c. I've had a poke around the guts of my Raspbian install and tried a few files from the headers src package, but nothing seems to work. I've also installed libusb2-dev from aptitude, again, to no avail in terms of placing a "usb.h" file into the /usr/local/include/ folder. So, my question is this: while I can find plenty of references to "usb.h" in the source files on the various repos on the net, I'm unable to find a copy of the actual "usb.h" file - if someone could shed some light on where I could potentially wget this file from straight into my include folder, that would be great. As for my application, I'm using a RaspberryPi for the fact its very low powered, and since I'll be using a 10Ahr Lithium solar/ performance car battery (started off as solar cells, were adapted to performance cars like the Subaru WRX) and a solar panel/ controller, I can gain autonomy over a weekend operating period. In short, I don't want to drag a generator to the remote base to top off the batteries if I can help it. The URI will be hooked to the Pi on one end, and a Simoco SRM9005 on the other end, through a set of custom cables I'm (slowly) soldering up. I did some more work on them today in terms of the DB25 to URIx cable (which will go to a 5 pin DIN socket, then 5 pin DIN plug to DB15 on the Simoco). On the client end I'll be using IAXRpt on my Macbook Air, which has OSX 10.7 and the latest, sound enabled, WiNE package, along with Winebottler wrapper program to make it nice and GUI like for me - not that I'm afraid of a command line, I just like some things to be simple, and sometimes our PEKAC troubleshooting has to be done with non-experienced personnel, who would faint at the sight of a CLI. I've also got a Linksys SPA942 I want to try in terms of VOX activation, but thats a secondary concern now I've got IAXRpt working successfully on my Mac. Of course, success (under test conditions) will be I press "Ctrl" on the Mac, and I hear my voice come out the SRM9025 head, and vice versa, PTT the SRM9025 head and hear it come out the laptop. This will be interesting, as the MBA doesn't have a microphone port, only a built-in mic, and the Bluetooth stereo input device I bought at Aldi didn't work... I also want a DJs "stick" headphone, as my role in these weekend expeditions is PEKAC and general support, as well as some operation - apparently I have a good, strong radio voice. Ok, enough rambling, as you can see, I'm using the various properties of the systems to gain advantage over say a vanilla Limey Linux install on an Atom. Plus I like ARM. I like a challenge, and if I were to get this working, I'm sure my friend Andrew will be able to use my Raspbian image on his Pis to make further remote bases for next years expedition at Marramarra National Park. He has more Pis and Simocos than me... Thanks in advance for any help you guys can give - I'll be interested to hear your responses.

5 17

O/T: Ham Radio Net And Podcast Tomorrow
by Buddy Brannan 27 Oct '12

27 Oct '12

Howdy, One time, I promise. Only announcing on the app_rpt reflector so that node owners can connect and participate, since we're using an Allstar node, along with Echolink. Tomorrow at 1800Z, 2PM Eastern time/11 AM Pacific time, we'll be recording the first edition of the Porkcast. Unlike other ham radio podcasts that only talk about how much fun ham radio is, we'll be using ham radio to show how much fun ham radio is. Since ham radio's an interactive hobby, we want participation, and what happens will be posted in the podcast feed later. We'll be operating in a loose informal net. Connect to Allstar link 2331, or Echolink node 17681 tomorrow afternoon. We'll be taking check-ins and comments. More information to be had at the web site: http://www.porkcast.net Vy 73, -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY

1 0

Re: [App_rpt-users] Hi my friend!
by Fran 24 Oct '12

24 Oct '12

hello! http://www.berounstimestane.cz/189672.php?jdpage=6obu9

1 0

What node is transmitting
by Neal Garbenis 23 Oct '12

23 Oct '12

If there are numerous nodes connected to a "hub". Is it possible to see witch node is transmitting in real time from the hub cli? Neal Garbenis Jr. NG8Y

2 1

Node behind a NAT router
by Ramesh Dhami (VA3UV) 22 Oct '12

22 Oct '12

Hi Guys; I have a node behind a NAT router, which is also masquerading the incoming IP. So any attempt to connect to it fails since the reported IP (i.e., the masqueraded IP) does not match the real IP (in the rpt_extnodes file). I do not have access to the router at the site, so anything I can do on the node to make this work? TIA! Ramesh. www.freestar.us

4 4

eanmode
by Pawlowski, Adam 22 Oct '12

22 Oct '12

In reading the telemetry page, it talks about "eanmode" under echolink telemetry, which is described as what the echolink users hear. They don't seem to hear anything, in defaut mode, when someone connects, which is fine for now I don't care. However, eanmode in 2/3 should cause the call of the station to be played, presumably like it does while connecting from the web transceiver. Unfortunately, when I change this option it does nothing, it just says "connected", or disconnected. In 3 it plays the node number. There's no output on the asterisk console in that it is trying to play something that's not available, some sound file or such. I didn't debug rpt/echolink but I suppose I can but before I go through that, is there any comment available on if this works at this time? Re: the previous commentary about NAT - I have not have trouble with it, only when it was in DMZ did it not work but with the proper header re-writes while port forwarding, it's worked fine. The perceived address anyways. Adam KC2YQF

1 0

zapata telephony pci quad radio interface
by ki6ies.tasma＠gmail.com 22 Oct '12

22 Oct '12

Are these cards no longer available? I have been searching the internet, but all that ever comes up is http://www.zapatatelephony.org which doesn't seem to exist anymore. Ian Ki6ies Sent from my Verizon Wireless 4G LTE DROID app_rpt-users-request(a)ohnosec.org wrote: >Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > >You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of App_rpt-users digest..." > > >Today's Topics: > > 1. Cant disc a remote node while the node is transmitting (Fran) > 2. Re: Radio stays in transmit (Chuck Henderson) > 3. Re: Cant disc a remote node while the node is transmitting > (Chuck Henderson) > 4. Re: Node behind a NAT router (Jeffrey S. Carrier) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Sun, 21 Oct 2012 21:08:02 -0700 (PDT) >From: Fran <baldwin88(a)yahoo.com> >To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> >Subject: [App_rpt-users] Cant disc a remote node while the node is > transmitting >Message-ID: > <1350878882.55319.YahooMailNeo(a)web120302.mail.ne1.yahoo.com> >Content-Type: text/plain; charset="iso-8859-1" > >Hello, >? >I have had an issue with a remote node staying keyed and could NOT disconnect him useing touch tone DTMF keypad...... >

2 1

Cant disc a remote node while the node is transmitting
by Fran 22 Oct '12

22 Oct '12

Hello, I have had an issue with a remote node staying keyed and could NOT disconnect him useing touch tone DTMF keypad......

2 1

Radio stays in transmit
by Fran 22 Oct '12

22 Oct '12

Hello, I have a remote user useing an RTCM connected to a simplex radio however when the simplex radio loses power to the radio (not the RTCM) the RTCM keys (transmits) to my server wheich in turn keys my repeater. How can this be prevented in the future? Frank

2 1